• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제17권2호
• /
• pp.76-86
• /
• 2012

Macrozoobenthos were collected from 24 sites using small grab ($0.05m^2$) in order to see the spatial distribution of them at Sueocheon stream at the northern part of Gwangyang Bay during summer season when the maximum ecological processes are occurring. A total of 44 species of macrozoobenthos occurred, and their mean density was $789individuals/m^2$. Mollusks was the dominant faunal group accounted for 43.1% and 86.8% of the whole community density and biomass, respectively. Top five dominant species were a molluscan, Corbicula japonica (40.7%), two polychaete worms, Neanthes japonica (19.3%) and Heteromastus filiformis( 8.1%), and two crustaceans, Paranthura japonica (6.9%) and Jaeropsis sp. (6.9%). Species diversity index was very low with mean value of 1.12 and maximum value was recorded at the river mouth. At the upper stream, a brackish water species such as Corbicula japonica showed their maximum population density. The overall distribution of stream macrobenthos showed a rather simple pattern along with salinity and grain size gradients with few brackish water species occurring at coarse sediments in the stream but more diverse faunas inhabiting fine sediments in the river mouth.

• Journal of Wetlands Research
• /
• 제6권1호
• /
• pp.57-72
• /
• 2004

Macrobenthic fauna were studied on a tidal flat in Garolim Bay in July 2002, in order to understand their spatial distribution with the surface sediment types. Forty-nine stations were set on the tidal flat. A total of 147 species was sampled with the mean density of $1,140ind./m^2$ and the mean biomass of $157.2g/m^2$. The polychaetes were speices- and density-dominant faunal group with 64 species and the mean density of $791ind./m^2$. Mollusks were biomass-dominant faunal group with $132.0g/m^2$. Major dominant species were two polychaetes, Mediomastus californiensis with the mean density of $374ind./m^2$ and Heteromastus filiformis with $224ind./m^2$. Also mollusks such as Umbonium thomasi, Batillaria cumingi and Ruditapes philippinarum was relatively high in the mean density, showing the density of 45, 42, $32ind./m^2$ respectively. Especially, U. thomas was distributed in the mouth of the bay, where sediment grain size is rather coarse, and R. philippinarum at near tidal channel. Based on the cluster analysis, the macrobenthic community on the tidal flat was classified into seven station groups depending on the benthic environmental parameters(sediment types). Compared with other Korean tidal flats, species richness of Garolim tidal flats is more and less low.

• Journal of the Korean earth science society
• /
• 제35권2호
• /
• pp.131-146
• /
• 2014

Multi-beam echosounder data and grain size analysis data of surface sediment were acquired and analyzed in order to investigate the shelf-to-slope morphology, geological character, and their geological controlling factors in the southwestern margin of the Ulleung Basin. According to the morphological character, the continental shelf can be divided into two parts: (1) shallow (~100 m) and steep ($0.5^{\circ}$) inner shelf, (2) deep (100-300 m) and gentle ($0.2^{\circ}$) outer shelf. The continental slope is featured with eight distinct topographic depressions of various spatial dimension (~121 $km^2$ in area) and head wall gradient (${\sim}24.3^{\circ}$). They are developed adjacent to each other and presumably formed by submarine landslides which have recurred under the strong influences of earthquakes and eustatic sea-level change. The inner continental shelf and the continental slope are dominated by fine-grained sediment, whereas the outer continental shelf is dominated by coarse-grained sediment. The surface sediment distribution seems dominantly influenced by eustatic sea-level change. The outer continental shelf is mostly covered by coarse relict sediment deposited during lowstand sea-level, while the inner shelf is covered with recent sediment during highstand sea-level. The surface of the continental slope is covered with fine-grained sediments which were supplied by hemipelagic advection process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제23권6호
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제7권2호
• /
• pp.101-108
• /
• 2019

This study is analysis of the utilization as a concrete fine aggregate on CGS, a by-product of Integrated coal gasification combined cycle(IGCC). That is, in KS F 2527 "Concrete aggregate," properties of 1~12times to CGS were evaluated, focusing on quality items corresponding to natural aggregate sand(NS) and melted slag aggregate sand(MS). As a result, the distribution of grain shape, safety and expansion were all satisfied with KS standards by physical properties, but the quality was unstable at 7~12times of water absorption ratio and absolute dry density. The particle size distribution was unstable due to asymmetry distribution of coarse particles, and particles were too thick for 7~12times. The passing ratio of 0.08mm sieve was also out of the KS standard at part factor of 7~12times, but chloride content, clay contents, coal and lignite were all satisfactory. Meanwhile, chemical composition was satisfactory except for $SO_3$ in 1~6times, and content and amount of harmful substances were all within the specified value except for F in 7~12times. As a result of SEM analysis, the surface quality and porosity were 7~12times more than 1~6times, and it was the quality was degraded. Therefore, it is necessary to reduce the quality deviation by using separate measures in order to utilize it as concrete aggregate in the future, and if it is premixed with fine quality aggregate, it will contribute positively to solve aggregate supply shortage and utilize circulation resources.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제24권1호
• /
• pp.106-127
• /
• 2019

This study aims to understand spatio-temporal variations of macrozoobenthos community in Han River (HRE), Geum River (GRE), and Nakdong River estuaries (NRE) of Korea, sampled by National Survey of Marine Ecosystem. The survey was seasonally performed at a total of 20 stations for three years (2015-2017). Sediment samples were taken three times with van Veen grab of $0.1m^2$) areal size and sieved through a 1 mm pore size mesh on site. A total of 1,008 species were identified with 602 species in HRE, 612 in GRE, and 619 in NRE, showing similar number of species between estuaries. Mean density was $1,357ind./m^2$, showing the high in NRE ($1,357ind./m^2$), mid in GRE ($1,357ind./m^2$), and low in HRE ($1,127ind./m^2$). Mean biomass was $116.8g/m^2$, showing similar variations to density ($174.2g/m^2$ in NRE, $129.0g/m^2$ in GRE, $49.0g/m^2$ in HRE). Polychaeta dominated in number of species and density in three estuaries. Biomass-dominated taxon was Mollusca in HRE and GRE, and Echinodermata in NRE. Polychaetous species dominated all three estuaries over 4% of density, such as Dispio oculata, Heteromastus filiformis and Aonides oxycephala in HRE, Heteromastus filiformis and Scoletoma longifolia in GRE, and Pseudopolydora sp. and Aphelochaeta sp. in NRE, showing various density between estuaries. Community structure was determined by various environmental variables among estuaries such as mean grain size and sorting (HRE), salinity and mean grain size (GRE), and salinity, dissolved oxygen, loss on ignition and mud content (NRE). Our study demonstrates the application of different measures to manage ecosystems in three estuaries. HRE needs to alleviate sedimentary stressors such as sand mining, land-filling, dike construction. Management of GRE should be focused on fresh water control and sedimentary stressors. In NRE, monitoring of dominant benthos and process study on hypoxia occurrence in inner Masan Bay are necessary.

• The Journal of Engineering Geology
• /
• 제16권1호
• /
• pp.15-21
• /
• 2006

Sandy soils obtained from the field were examined by the way of particle analyses. The hydraulic conductivity values of the disturbed soil samples were measured by the falling head method. Then the correlations between the hydraulic conductivity and particle distribution were defined. The soil which was a product of the weathering of the granitic rocks belonged to sand and loamy sand area in a sand-silt-clay triangular diagram. The measurements of hydraulic conductivity were $1.15X10^{-5}\sim7.31X10^{-4}cm/sec$ which is the range of sand and silt. It was clearly observed that the hydraulic conductivity measurements of the sandy soils showed stronger correlations with the particle variances rather than the mean grain sizes. The larger the variances, the smaller the hydraulic conductivity measurements. The sandy soil which was a product of weathered granite and whose mean grain size was $0.38\sim1.97mm$ showed regression curves of $y=6.0E-5x^{-1.4}$ in a correlations between hydraulic conductivity and particle variances. Accordingly, it is clearly concluded that making estimates with-out any consideration about particle variances can produce serious errors.

• Journal of the Korean Electrochemical Society
• /
• 제7권3호
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.331-331
• /
• 2017

This study was conducted to know the influence of air temperature and sunshine duration on yield, chemical component, pigment color difference and starch characteristics of two colored rice cultivars in the plain area of Yeongnam province in Korea. The $L^*$, $a^*$, and $b^*$ value of brown rice in Hongjinju and Josaengheugchal rice cultivars was significantly different at continuous cultivated years, 2015 and 2016. The $L^*$, $b^*$ value of two colored rice was significantly increased in 2016 compared to 2015. The $a^*$ value of Josengheugchal rice cultivar was also significantly higher at 2016 than at 2015. It can be noticed the $a^*$, $b^*$, $L^*$ values in Josaengheugchal varied more than those in Hongjinju. Air temperature during ripening period in 2016 was higher than 2015, especially minimum temperature was too high to proper maturation for rice quality. In Josaengheugchal rice cultivar, sunshine duration after heading was longer in 2016 than in 2015. On the contrary, Hongjinju rice cultivar was ripened under condition of insufficient sunshine duration in 2016. The short growing duration by high temperature and long shiny duration made the lack of pigment for Josaengheugchal brown rice. In Hongjinju rice cultivar, shorten sunshine duration and higher night temperature were the source of the pigment deficiency. The grain size of rice which produced in 2016 was bigger than that of 2015 in both rice cultivars. The 1,000 grain weight of rice from 2016 was also bigger than that of 2015. Head rice ratio was high in the rice cultivars produced in 2015. Protein of milled rice in 2016 was more decreased than that of 2015 in Josaengheugchal rice cultivar, it showed reverse result in Hongjinju rice cultivar. Amylose contents of milled rice in 2016 were more decreased than that of 2015 in Hongjinju rice cultivar. Branch chain length distribution of amylopectin was shown a distinct difference between Josaengheugchal and Hongjinju rice flours by each produced year. Josaengheugchal rice cultivar produced in 2015 had a higher amount of short chains than that of 2016 rice starches. In Josaengheugchal rice cultivar, the pasting temperature and peak, trough, breakdown, final viscosity increased in rice flour which produced at 2016, whereas the setback viscosity and peak time showed lower value than those of rice from 2015. The most pasting properties (except of setback viscosity) of rice starch in Hongjinju rice cultivar grown in 2015 were higher than those of rice cultivar produced in 2016.

• Korean Journal of Materials Research
• /
• 제21권10호
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.