• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.49-54
• /
• 1976

No reliable basic data were available on the kinetic friction coefficients between grains and frictional surfaces being used in grain handling equipments in Korea. In order to determine appropriate kinetic friction coefficient between three grains (Tongil, Jinheung, barley) and two surfaces at four levels of moisture content of grain, the laboratory tests using the newly designed experimental apparatus and strain gage measuring system were carried out, and the relationship among factors that affect kinetic friction coefficients of grains were analyzed. The results of this study are summarized as follows ; 1. Kinetic friction coefficient of samples being tested was dependent on surfaces and moisture content of grains . The ranges of them were 0.369-0.512 for Tongil variety , 0.347-0.469 for Jinheung variety, and 0.360-0.502 for barley, respectively. 2. There was a little difference of kinetic friction coefficients between two varieties of rice at the same testing conditions. Because the interaction had been large among treatments , each value of kinetic friction coefficient determined in this study should be used only for the corresponding conditions in this study . 3. Kinetic friction coefficients in creased linearly with increase in moisture content of grains and their regression equations were shown in Table.4. 4. Kinetic friction coefficients on a PVC surfaces was shown a little lower values than on the steel surfaces at various moisture levels, but especially in Jinheung and barley, a big difference was shown.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권7호
• /
• pp.965-973
• /
• 2011

Our objective was to determine the differences in the rate and extent of dry matter digestion between barley subjected to differing agronomic variables. Two malting barley varieties, Copeland and Metcalfe were seeded at rates of 200 and 400 plants/$m^2$. Each of these varieties received nitrogen fertilizer at rates of 0, 30, 60 and 120 kg/ha, resulting in a total of 20 different barley grain samples. Samples were ground through a 6mm screen and approximately 3 g of each weighed into 50 ${\mu}m$ Dacron bags and sealed. The bags were incubated in three ruminally cannulated Holstein cattle for periods of 0, 3, 6 and 24 h. Using the data obtained from these incubations, rates of digestion were able to be predicted. The soluble fraction ranged from 0.229-0.327, the slowly degradable fraction ranged from 0.461-0.656, and the undegradable fraction ranged from 0.038-0.299. The rates of digestion ranged from 0.127-0.165 $h^{-1}$ and the effective degradability ranged from 0.527-0.757. At the Canora location, the Copeland samples which received 120 kg/ha of nitrogen fertilizer had a significantly lower (p = 0.013) soluble fraction than the rest of the samples at that location. A significant interaction (p = 0.009) was seen between the seeding rate and nitrogen fertilizer application with samples from the Canora location, as well as significant differences (p = 0.029) between nitrogen application rates in samples from the Indian head location. The rate of digestion of samples from the Indian head location differed (p = 0.020) between the two seeding rates, with samples seeded at 200 seed/$m^2$ having a slightly higher rate of degradation. Differences in the effective degradability were seen between the different nitrogen application rates with samples from both the Canora and Indian head locations, as well as an (p = 0.004) interaction between the seeding rate and nitrogen fertilizer application rate. Although there was not a clear correlation between the different variables, both nitrogen application and seeding rate did have a significant effect on the rates and extent of digestion across each of the four locations.

• Journal of Animal Science and Technology
• /
• 제58권6호
• /
• pp.19.1-19.7
• /
• 2016

Background: Cowpea (Vigna unguiculata [L.]) is a legume cultivated throughout most tropical countries and is valued as food and feed for human and livestock respectively. The search for an improved cowpea variety has been on-going with the aim of improving traits such as grain yield, drought and pest resistance. But no information exist on the feeding value of these improved varieties. Phosphate (P) fertilizer application is recommended to augment grain yield in grain legumes but data on the effect of P fertilizer on haulm quality is limited. Results: Two separate experiments were conducted to determine the effect of P fertilizer dose on the nutritive value of haulms from different cowpea varieties (V). In experiment 1, effect of three P doses (30, 60 and 90 kg $P_2O_5/ha$) on in vitro gas production (IVGP) characteristics, concentrations of digestible organic matter (DOM), crude protein (CP), acid detergent fiber (ADF) and neutral detergent fiber (NDF) of haulms from five cowpea varieties (Zaayura-SARC 4-75, Songotra-IT97K-499-35, Hewale-IT93K-192-4, IT99K 573-1-1 and Asomdwe-IT94K-410-2) were investigated using the $3(P){\times}5(V)$ factorial treatment arrangements in a completely randomized design. In experiment 2, the effects of two P doses (30 and 90 kg $P_2O_5/ha$) and two varieties (Zaayura-SARC 4-75 and Hewale-IT93K-192-4) on the voluntary feed intake, live weight, haematology and carcass characteristics of Djallonke lambs were also assessed using a $2(P){\times}2(V)$ factorial treatment arrangement. The $V{\times}P$ interaction significantly affected CP, NDF and ADF with CP concentration increasing with increase in P doses in Zaayura-SARC 4-75 and Asomdwe-IT94K-410-2. Whilst an increase (P < 0.05) in NDF was observed in Songotra-IT97K-499-35and Asomdwe-IT94K-410-2 as P doses increased, the other V only increased from P dose 30 to 60 kg/ha and declined at P dose 90 kg/ha. The ADF decreased (P < 0.05) with increase in P dose for all V with the exception of Songotra-IT97K-499-35. There was a significant V effect on DOM with the highest reported in Zaayura-SARC 4-75 (43.44 %). Daily DM intake, carcass length and blood urea nitrogen of the lambs were significantly affected by the V x P interaction. There was a significant V effect on globulin and P effect on live weight at slaughter, dressed weight, chuck, leg, loin, rib and flank and liver and lungs. Conclusion: It can be concluded that nutrient concentrations of cowpea haulms were positively influenced by different P dose and varieties with favorable effects on growth, haematology and carcass composition of lambs. Varieties Zaayura-SARC 4-75 and Hewale-IT93K-192-4 at P dose at 90 kg/ha are recommended to enhance growth performance and carcass yield of Djallonke lambs.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.323-334
• /
• 2002

The purpose of this study is to investigate which current densities and etching times will result in an optimal etching depth and surface roughness when an Ni-Cr-Be alloy is etched with 30% perchloric acid($HClO_4$). For this study, observations were made by means of an optical three-dimensional surface roughness measuring machine and a scanning electron microscope. The etchings took place under the following conditions using current densities of $300mA/cm^2\;450mA/cm^2,\;600mA/cm^2$ and $750mA/cm^2$, and using etching time of three, five, six, seven and nine minutes. Under the conditions, the experiments reached the following conclusions. 1. When the current density is above $450mA/cm^2$ and the etching time is longer than five minutes, the etching depth increased as the current density and etching time increased. And the surface roughness was significantly influenced by the interaction of the current density and etching time. 2. Under the etching conditions of $600mA/cm^2$ and five minutes, the optimal etching depth for a resin cement space and the highest surface roughness for mechanical retention were obtained. The etching depth and surface roughness were $32.86{\mu}m$ and $7.90{\mu}m$, respectively. 3. Observations under the scanning electron microscope showed that both the corrosion at the grain boundary and the corrosion within the grain occurred on the etched surface. It was also observed that the corrosion at the grain boundary became more severe as the current density and etching time increased. In addition. at higher current densities and longer etching times general corrosion appeared.

• 한국지반공학회논문집
• /
• 제27권6호
• /
• pp.49-61
• /
• 2011

본 연구는 토석류의 유통성과 관련하여 세립토의 흐름특성, 유변학적 모델들의 적용가능성 및 액성상태 의존성 유변학적 특성들을 비교 분석하였다. 입자크기에 따른 유변학적 특성을 살펴보고자 점토질이 풍부한 지중해 해저점토와 실트질이 풍부한 캐나다 동부 뉴펀들랜드 와부시 호수에서 채취한 광미에 대한 물성특성을 분석하였다. 점토질이 풍부한 세립토의 경우 전형적인 전단담화(shear thinning) 거동을 보이는 반면, 실트질 광미의 경우는 전단담화와 Bingham 유체 거동을 함께 보인다. 후자의 경우, 전단변형률속도를 높임에 따라 Bingham 유체처럼 거동하였다. 이러한 현상학적 차이는 입자크기에 따른 유동특성곡선의 차이에서 기인한 것이다. 항복응력과 소성점도의 결정은 전단변형에 의한 유동 입자들의 구조적 변화와 응력상태와 관련되기 때문이다. 세립토(< 0.075mm)를 다량 함유한 토석류의 유동성을 역해석하고자 할 때, 퇴적형상(흐름 양상, 퇴적층의 모양, 두께 및 길이 등)은 항복응력과 소성점도에 의해 결정된다. 항복응력과 소성점도는 액성지수의 함수로 나타낼 수 있으므로, 토석류의 발생가능지역에서 액성상태에 따른 토석류의 유동성을 평가할 지표로 활용할 수 있다.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.335-339
• /
• 2006

The level of ${\beta}-glucan$ which is a major soluble dietary fiber found in the grain endosperm cell wall was highly variable among 25 barley genotypes grown at four locations including Suwon, Naju, Jinju, and Jeju. Statistically significant genotypic effects were observed for ${\beta}-glucan$ content at each or across growing sites (P<0.001). On average, 'Chalssalbori' showed the lowest percentage ${\beta}-glucan$ (4.04%) among genotypes in the grain, whereas 'Yonezawa Mochi' was highest in percentage ${\beta}-glucan$ (6.46%) compared to other genotypes. The significant difference between genotypes was approximately 1-2% across environments. The effects of location or interaction between locations and genotypes were not significant on the variation of ${\beta}-glucan$ contents. High ${\beta}-glucan$ content seemed to be greatly associated with such grain traits as waxiness and presence of husk except for 'Chalssalbori'. The waxy genotypes had a mean of 5.37% and values ranging from 5.28 to 5.47%, but normal genotypes had a mean of 4.78% and values ranging from 4.69 to 4.88% over environments. Hulless barley genotypes were also higher than hulled barley genotypes for the average ${\beta}-glucan$ content in both individual and over all environments. The difference between the hulled and hulless gene pools was on average of 0.37% with ranges from 0.19% to 0.56% at four environments. ${\beta}-glucan$ content measured from a mapping population of $F_5$-derived 107 lines derived from the cross between 'Yonezawa Mochi' and 'Neulssalbori' was not significantly associated with other agronomic traits except for 1,000-kernel weight at the '01 Suwon environment. Not too much information on the relationship of ${\beta}-glucan$ content to agronomic traits was available.

• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.464-468
• /
• 2015

Our government has performed to support the nation-wide application of customized fertilizer based on soil-testing results and crop nutrient balance in order to promote the environment-friendly agriculture and to respond the global environment guide-line since 2010. This study was performed at the selected local paddy fields (Hwaseong-si, Uiseong-gun and Miryang-si) with different soil chemical properties in 2012. The contents of amino acids measured showed an increasing trend with fertilization, and glutamic acid was the most abundant amino acid followed by aspartic acid, leucine and alanine. However, valine, isoleusine, tyrosine and lysine were not significantly affected by fertilization. The significant differences in grain N, expressed as a crude protein, and amino acids dose was observed between experimental sites (p<0.001), treatments (p<0.01 to 0.001) and interaction of both factors (p<0.01 to 0.001). In our experiment the following order of carbon skeleton backbones to produce amino acids was observed irrespective of experiment sites and fertilization: ${\alpha}$-ketoglutarate > oxalate > pyruvate > 3-phosphoglycerate > phosphoenolpyruvate. In conclusion, customized fertilizer had no difference in amino acids compared to the conventional-NPK practice which was higher than in no fertilization, and also the normal paddy represented slightly higher amino acids compared to the reclaimed. Further study based on the present results is required to investigate what is main factor to amino acids between genetic and environmental factors.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• 한국작물학회지
• /
• 제46권6호
• /
• pp.434-438
• /
• 2001

제주지역에서 잎들깨 품종의 채종을 위한 적정파종기를 구명하고자 잎들깨 1호와 만백들깨를 5월 15일부터 7월 15일까지 15일 간격으로 5회 파종하여 생육 및 종실수량을 조사한 결과는 다음과 같다. 1. 품종과 파종기간 상호작용은 생육일수에서만 유의하였다. 개화일수만이 품종간 유의한 차이가 있었는데, 잎들깨 1호가 만백들깨보다 약 2일 일찍 개화되었으나 성숙기는 약 1일 늦었다. 2. 파종이 5월 15일에서 7월 15일로 늦어짐에 따라 두 품종의 평균 개화일수는 137일에서 77일로, 생육일수는 179일에서 121일로 짧아졌다. 3. 파종이 5월 15일에서 7월 15일로 늦어짐에 따라 경장은 150cm에서 81cm, 분지수는 17.0개에서 7.3개, 주경절수는 16.9개에서 10.3개로 감소되었다. 4. 주당 화방군수는 5월 15일 파종에서 65.6개이었던 것이 파종이 늦어짐에 따라 점차 줄어들어 7월 15일 파종에서 50.7 개이었다. 화방당 삭수는 32.1~33.4개로 파종기에 따른 유의한 차이가 없었다. 1,000 입중은 5월 15일 파종에서 3.2 g이었던 것이 파종이 늦어짐에 따라 점차 무거워져서 7월 15일 파종에서 3.9 g이었다. 5. ㏊당 종실수량은 5월 15일 파종에서 1,820 kg이었던 것이 만파할수록 감소하여 7월 15일 파종에서 1,338 kg이었는데, 5월 15일과 30일 파종간에는 유의한 수량 차이가 없었다. 본 연구 결과에 의하면 제주지방에서 잎들깨 품종의 채종을 위한 파종적기는 5월 상순-하순으로 보인다.

• 한국토양비료학회지
• /
• 제16권4호
• /
• pp.325-332
• /
• 1983

답토양(畓土壤)에 시용(施用)한 규산(珪酸) 및 인산질비료(燐酸質肥料)의 토양중(土壤中)에서의 가급성(可給性)에 대한 상호간(相互間)의 작용(作用)과, 수도체(水稻體)에 의한 양성분(兩成分)의 흡수(吸收)에 미치는 상호관계(相互關係) 및 수도체(水稻體)의 생육(生育)에 미치는 영향(影響)을 시험(試驗)하기 위하여 수도품종(水稻品種) "진흥(振興)"에 규산질비료(珪酸質肥料)와 과인산석회(過燐酸石灰)를 각각(各各) 다른 수준(水準)으로 처리(處理)하여 재배시험(栽培試驗)한 결과(結果)는 다음과 같다. 1. 토양중(土壤中)에서는 규산(珪酸)과 인산(燐酸)은 상호간(相互間)에 길항적(拮抗的)으로 작용(作用)하여 두 성분(成分)의 유효도(有效度)를 저하(低下)시키는 경향(傾向)이었다. 2. 규산질비료(珪酸質肥料)의 시용량(施用量)이 많을수록 토양(土壤)의 pH가 상승(上昇)하였다. 3. 규산(珪酸)은 시용수준(施用水準)이 높을수록 수도체(水稻體)가 흡수(吸收)하는 규산(珪酸)의 양(量)은 증가(增加)하였으나 인산(燐酸)은 시용수준(施用水準)이 높아져도 체내(體內)의 인산(燐酸)의 양(量)은 증가(增加)하지 않았다. 4. 수도체(水稻體)에 의한 규산(珪酸)의 흡수(吸收)는 인산시용(燐酸施用)에 의해 뚜렷이 억제(抑制)되었으며 인산(燐酸)의 흡수(吸收)는 규산(珪酸)의 시용량(施用量)이 많을 때에는 뚜렷이 억제(抑制)되었으나 규산(珪酸)의 시용량(施用量)이 그보다 낮을 경우에는 생육시기(生育時期) 및 수도체(水稻體)의 부위(部位)에 따라 인산(燐酸)의 흡수(吸收)가 억제(抑制) 또는 촉진(促進)되는 경향(傾向)이었다. 5. 규산(珪酸)과 인산(燐酸)의 증시(增施)는 초장(草長), 분얼수(分蘖數) 및 이삭중(重)을 증가(增加)시켰고, 건물량(乾物量)은 일정(一定)한 경향(傾向)을 보이지 않았다.