• 제목/요약/키워드: grain growth inhibition

검색결과 52건 처리시간 0.023초

12Ce-TZP 세라믹스의 소결에서의 CaO의 역할 (Role of CaO in the Sintering of 12Ce-TZP Ceramics)

  • 박정현;문성환;박한수
    • 한국세라믹학회지
    • /
    • 제29권4호
    • /
    • pp.65-65
    • /
    • 1992
  • 12Ce-TZP의 소결에 미치는 CaO의 역할에 대하여 연구하였다. CaO의 첨가는 Ce-TZP의 격자결함구조와 확산의 율속종인 cerium과 zirconium 이온의 확산계수를 변화시켜 치밀화를 촉진시킨다. CaO는 또한 소결과정중 결정립 성장을 억제하며, 이는 소결과정중 임계 이동시 입계로부터의 기공의 분리를 방지함과 동시에 기공으로부터 입계로의 공격자의 빠른 확산을 유지시킴으로써 이론밀도까지의 소결을 가능하게 한다. Ce-TZP의 결정립 성장 억제는 calcium의 입계편석에 의한 입계 이동도의 감소에 의하며, calcium의 입계편석을 AES 분석으로 확인하였다.

$BaTiO_3$세라믹스에서 Ba/Ti비 변화에 따른 소결거동 및 비정상 입자성장에 대한 연구 (Study on the Sintering Behavior and Abnormal Grain Growth with Ba/Ti ratio variation of $BaTiO_3$ Ceramics)

  • 최종선;김호기
    • 한국재료학회지
    • /
    • 제1권1호
    • /
    • pp.37-45
    • /
    • 1991
  • $BaTiO_3$세라믹에서 미세구조를 조절하기 위하여 Ba/Ti비 변화에 따른 소결거동 및 비정상 입자성장에 대하여 연구하였다. 본 연구에서 사용한 $BaTiO_3$분말은 $BaCO_3$$TiO_2$를 이용하여 일반적인 고상반응법으로 제조하였다. Ba/Ti비가 감소할수록(과잉 $TiO_2$가 증가할수록)소결 시작온도가 낮아졌으며 치밀화가 증진되었다. 이것은 과잉 $TiO_2$양이 증가할수록 하소된 분말의 크기가 감소되었기 때문으로 판단되며, 공융액상 형성으로 인한 액상소결에 의한 것이 아님을 알 수 있었다. 또한 과잉 $TiO_2$양이 증가할수록 입자성장이 강력하게 억제되었으며, 이는 Ti-rich 이차상이 입자성장을 억제시킴을 의미한다. 따라서 이러한 이차상의 불균일한 분포로 인하여 비정상 입자성장이 일어나는 것으로 판단되었다.

  • PDF

기계적 합금화 및 스파크 플라즈마 소결에 의해 제조된 Al-Fe-X계 합금의 열적 안정성: II. Al-Fe-Cr and Al-Fe-Mo (Thermal Stability of Al-Fe-X Alloy System Prepared by Mechanical Alloying and Spark Plasma Sintering: II. Al-Fe-Cr and Al-Fe-Mo)

  • 이현권;이상우;조경식
    • 한국분말재료학회지
    • /
    • 제12권1호
    • /
    • pp.43-50
    • /
    • 2005
  • Mechanical alloying using high-energy ball mill and subsequent spark plasma sintering (SPS) process was applied to Al-Fe-Cr and Al-Fe-Mo powder mixture to investigate effects of Cr and Mo addition on thermal stability of Al-Fe, and thereby to enhance its thermal stability up to $500^{\circC}$. Various analytical techniques including micro-Vickers hardness test, SEM, TEM, X-ray diffractometry and corrosion test were carried out. It was found that addition of Cr and Mo to Al-Fe system played a role of grain growth inhibitor of matrix Al and some precipitates such as $Al_3Fe$ during SPS and subsequent heat treatment. The inhibition of grain growth resulted in increased Vickers hardness and thermal stability up to $500^{\circC}$ comparing to those of Al-Fe alloy system.

용융염법으로 합성한 Ba-ferrite의 $SiO_2$ 및 Seed 첨가 효과 (Effects of $SiO_2$ and Seed on Ba-ferrite Synthesized by Molten Salt)

  • 김영근;이승관;김현식;오영우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.326-329
    • /
    • 1996
  • In order to synthesize Ba-ferrite fine particles by molten salt method and inhibit the abnormal grain growth of sintered specimen, KCI anti NaCl were added to basic composition to 50% by weight, and added 1 male% of $SiO_2$ to control the shape of Ba-ferrite particles. $H_{c}$ and $M_{r}$ were decreased when F $e^{3+}$ was substituted with $Co_{2+}$ and $Ti_{4+}$ from x=0 to x=1.0 in $BaFe_{12-2x}$ $Ti_{x}$ $Co_{x}$ $O_{19}$ , and 1 mole% $SiO_2$ increased the size but shortened c-axis of hexagonal ferrite. Seeds added in Ba-ferrite particle effected inhibition of abnormal grain growth during sintering.ing.g.

  • PDF

Effect of prohexadium-calcium on growth, lodging and yield of proso millet (Panicum miliaceum L.)

  • Choi, Young Dae;Jung, Ki Yuol;Chun, Hyun Chung;Lee, Sang Hun;Kang, Hang Won
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.207-207
    • /
    • 2017
  • The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

  • PDF

반응고 Al-Zn-Mg계 합금의 반용융 압출을 위한 재가열 시 결정립 성장 억제에 미치는 Ca 첨가의 영향 (The Effect of Ca Addition on the Grain Growth Inhibition During Reheating Process of Al-Zn-Mg Al Alloys for Thixo-extrusion)

  • 박형원;김대환;심성용;김희경;성봉학;최창옥;임수근
    • 한국주조공학회지
    • /
    • 제31권6호
    • /
    • pp.347-353
    • /
    • 2011
  • There is thixo-extrusion to form high strength aluminum alloy. But, it is a problem that grains become grain coarsening during reheating process because the alloy was exposed at high temperature. In order to solve grain growth during reheating process, calcium was added in Al-Zn-Mg alloys. Primary a grain sizes of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca were measured with image analyzer after reheating. Measured primary a grain sizes were applied to LSW(Lifshitz-Slyozov and Wagner) equation to check the effect of Ca on grain coarsening. Coarsening rate constant K values of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca alloys were $371\;mm^3s^{-1}$, $247\;mm^3s^{-1}$, $198\;mm^3s^{-1}$ and $166 mm^3s^{-1}$, respectively. As increasing calcium content, K value decreased which means grains are refined. Also, grains of calcium addition were more spherical than that of calcium free.

생장 조절제(B995.CCC) 산포가 대두의 생육 및 수량에 미치는 영향 (Effects of Growth Retardants B995 and CCC on the Growth arid Yield of Soybean)

  • 위성옥;최원열
    • 한국작물학회지
    • /
    • 제29권3호
    • /
    • pp.285-290
    • /
    • 1984
  • 대두에 왜화제인 B 995와 CCC를 살포시기별(본엽 4, 5, 6 매), 농도별 (500, 1000, 2000, 3000 ppm)로 엽면살포하여 생육 및 수량에 미치는 영향을 구명하고자 본 실험을 수행하여 얻어진 주요결과는 다음과 같다. 1. 약제별로는 경장에서만, 살포시기별로는 결협율에만, 그리고 농도별로는 경장, 분지수, 결협율, 주당협수와 수량에서만 유의성이 인정되었다. 2. 견장의 단축은 CCC보다는 B 995가 더 효과적이었으며 결협율은 본엽4 매시의 살포에서 가장 높았다. 3.농도별효과를 보면 저농도보다는 고농도인 3,000ppm에서 경장의 단축, 분지수, 결협율 그리고 주당협수의 증가와 수량의 증대를 나타냈다. 4. 주경절수, 경건중, 엽록소와 100입중은 약제살포시기 및 농도별로 유의성이 없었다. 5. 수량은 경장과는 부의 상관이었고 분지수, 주당협수, 결협율과는 정의 상관이었다. 6. 왜화제의 엽면살포는 주요수량구성 요소증대에 상당히 효과적이었다.

  • PDF

$Al_2O_3/Mo/MnO_2$ 복합재료의 기계적 특성 (Mechanical properties of $Al_2O_3/Mo/MnO_2$ composite)

  • 박현;김경남
    • 한국결정성장학회지
    • /
    • 제16권4호
    • /
    • pp.172-179
    • /
    • 2006
  • [ $Al_2O_3-MoO_3$ ]의 혼합물을 환원소성하면 $MoO_3$$900^{\circ}C$에서 Mo로 환원되고 $1300^{\circ}C$까지 $Al_2O_3$와 Mo간의 화합물은 형성되지 않았다. $Al_2O_3-MoO_3-MnO_2$, 혼합물의 경우, $900^{\circ}C$에서 먼저 $MnO_2$$MoO_3$와 반응하여 중간화합물 $Mn_2Mo_3O_8$를 형성하였다가. $1100^{\circ}C$$1300^{\circ}C$에서 $Mn_2Mo_3O_8$ 화합물은 사라지고 새로운 화합물 $MnAl_2O_4$가 생성되었다. $Al_2O_3$$MoO_3,\;MnO_2$의 혼합분말 중 Mo만이 선택적으로 환원되는 selective reduction process에 의해 $Al_2O_3/Mo/MnO_2$ 복합재를 제조하였다. $Al_2O_3/Mo$ 복합재의 경우 Mo의 함량이 증가함에도 불구하고 Mo입자가 $Al_2O_3$ matrix의 입성장을 억제하여 평균입경의 변화는 거의 없었다. 파괴강도는 $Al_2O_3$ matrix의 입성장 억제 현상 때문에 Mo의 함량이 증가함에 따라 증가하였다. 경도는 Mo의 낮은 경도값 때문에 약간 감소하였으나 반면에 파괴인성은 증가하였다. $Al_2O_3/Mo/MnO_2$ 복합재의 경우 $MnO_2$는 matrix의 입성장을 촉진시켰고, Mo와 $MnO_2$의 함량이 증가함에 따라 $MnO_2$의 입성장효과 때문에 오히려 낮은 파괴강도를 보였다. 경도는 입계에 존재하는 coalesced Mo 입자들과 matrix의 입성장 때문에 더욱 감소하였으나 반면에 파괴인성은 더욱 증가하는 경 향을 보였다.

Influence of Dysprosia Addition on Microstructure and Electrical Properties of Praseodymia-based Zinc Oxide Varistors

  • Nahm, Choon-Woo
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권4호
    • /
    • pp.144-148
    • /
    • 2005
  • The microstructure and electrical properties of varistor ceramics, which are composed of Zn-Pr­Co-Cr-Dy-oxide system, were investigated at various dysprosia $(Dy_2O_3)$ addition contents. The $DY_2O_3$ microstructurally played the role of inhibition for the densification and grain growth. As the $DY_2O_3$ content increased, the density decreased in the range of $5.51-4.90 g/cm^3$, reaching maximum at $0.5 mol\%$ and the average ZnO grain size decreased in the range of $17.7-6.0{\mu}m$. The incorporation of $DY_2O_3$ significantly improved the nonlinear properties of varistors, above 30 in nonlinear exponent, compared with that without $DY_2O_3$. The varistors with the best performance of nonlinear properties was obtained $DY_2O_3$ content of $1.0 mol\%$, 49 in nonlinear exponent and $0.5{\mu}A$ in leakage current.

AlN/W계 복합재료의 기계적 특성과 미세구조 (Mechanical Properties and Microstructure of AlN/W Composites)

  • 윤영훈;최성철;박철원
    • 한국세라믹학회지
    • /
    • 제33권1호
    • /
    • pp.83-91
    • /
    • 1996
  • Monolithic AlN and AlN-W composites were fabricated by pressure-less sintering at 190$0^{\circ}C$ under nitrogen atmosphere and the influences of tungsten phase on the microstructure and mechanical properties were investi-gated. In the fabrication of sintered specimen no additive was used. And monolithic AlN showed substantial grain growth and low relative density. AlN-W composites were fully densified and grain growths of matrix were inhibited. The densification behavior of composites were inferred to be achieved through the liquid phase sintering process such as particle-rearrangement and solutino-reprecipitation. Also the oxid phases which is expected to form liquid phases duringsintering process were detected by XRD analysis. As the tungsten volume content increases fracture strength was decreased and fracture toughness was increased. It was suppo-sed that the strength decrease of composites with tungsten content was due to existence of interface phases. The subcritical crack growth behavior was observed from the stress-strain curve of composites. The effect of the secondary phase and interface phases on toughness in crease were studied through observation of crack propagation path and the influence of residual stress on crack propagation was investigated by X-ray residual stress measurement. In the result of residual stress measurement the compressive stress of matrix in composi-test was increased with tungsten volume content and the compressive stress distribution of matrix must have contributed to the inhibition of crack propagation.

  • PDF