• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.151-158
• /
• 2015

This study was conducted to know the variation and relationship of rice grain quality and starch pasting properties by transplanting times. Two early maturing rice cultivars which accounted for the most area of early maturing rice cultivar in Chungnam province were used. The experiment was laid out in a split-plot design with 3 replications. The main plot consisted of three transplanting times viz. early (April 25), ordinary (May 25) and late (June 25) with sub-plots containing two cultivars. According to the transplanting times, most of rice grain quality and starch pasting properties showed significant difference and Joami showed higher grain quality than Unkwang in all transplanting times. Especially, rice grain quality was improved when transplanted late, showing high head rice and glossiness of cooked rice due to the lower mean temperature during grain filling stage. Glossiness of cooked rice was positively correlated with head rice ratio, amylose content and setback value, and negatively correlated with chalky rice ratio and protein content. The highest positive and negative correlation were observed between breakdown value and peak viscosity ($r=0.98^{**}$), and breakdown and setback ($r=-0.94^{**}$), respectively. These results provide some information for rice researchers and producers producing cultivars with an improved quality, suggesting that rice quality is highly influenced by temperature at grain filling stage, and transplanting times is crucial in improving rice quality. In addition, starch pasting properties are useful for determining rice quality because rice grain quality and starch pasting properties are dependent on each other.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.36-44
• /
• 2009

This experiment was conduced to clarify the effects of growth temperature and radiation on grain weight increase and grain nitrogen accumulation in rice. Final grain weight became heavy and grain-filling duration shortened with radiation increase during grain-filling period (GFP). In addition, grain nitrogen accumulated duration during GFP was influenced strongly, but final grain nitrogen content was influenced slightly by accumulated radiation (AR). Accumulated effective temperature (AET) described well variation of grain weight (GW) and grain nitrogen content (GN), but GW and GN showed large variation under different radiation during GFP, when related with AET or AR, indicating that there was a limiting in describing variation of GW and GN by any single factor between AET and AR. However, AET multiplied by AR could describe relatively well the variations of GW and GN regardless of radiation during GFP.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.384-388
• /
• 2014

Air temperature has increased, while sunshine hour has decreased during the grain filling period of most rice cultivars (August to September) during the past 12 years from 2001 through 2012 in Korea. Climatic Productivity Index (CPI) has fallen because of the decreased sunshine hour and increased air temperature during the grain filling period, and the degree of reduction was greater with earlier heading. For stable rice production, we will need to delay the heading of rice as a cultivation measure against the future climatic trend. Grain yield showed no significant trend for past 12 years. However, the year to year change in grain yield showed a similliar pattern with that of CPI. Especially, a linear function relating rice yield to CPI explained approximately 63% of variation in grain yield with the heading date of August $11^{th}$ period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.275-283
• /
• 2010

This experiment was conducted to construct process models to estimate grain weight (GW) and grain nitrogen content (GN) in rice. A model was developed to describe the dynamic pattern of GW and GN during grain-filling period considering their relationships with temperature, solar radiation and growth traits such as LAI, shoot dry-weight, shoot nitrogen content, grain number during grain filling. Firstly, maximum grain weight (GWmax) and maximum grain nitrogen content (GNmax) equation was formulated in relation to Accumulated effective temperature (AET) ${\times}$ Accumulated radiation (AR) using boundary line analysis. Secondly, GW and GN equation were created by relating the difference between GW and GWmax and the difference between GN and GNmax, respectively, with growth traits. Considering the statistics such as coefficient of determination and relative root mean square of error and number of predictor variables, appropriate models for GW and GN were selected. Model for GW includes GWmax determined by AET ${\times}$ AR, shoot dry weight and grain number per unit land area as predictor variables while model for GN includes GNmax determined by AET ${\times}$ AR, shoot N content and grain number per unit land area. These models could explain the variations of GW and GN caused not only by variations of temperature and solar radiation but also by variations of growth traits due to different sowing date, nitrogen fertilization amount and row spacing with relatively high accuracy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.229-229
• /
• 2017

This research study was conducted to analyze the characteristics of different rice cultivars in abnormal temperature conditions (low temperature) for ripening period abnormalities, and to investigate the physiological causes behind the abnormalities. Four Korean high quality japonica-type rice cultivars, Jinbu (JB), Junamjosaeng (JJ), Geumyoung (GY), Hwawang (HW) were used in the experiment. The following day after flowering, they were then moved into two phytotrons under natural daylight with 65% RH but controlled at different temperatures - one at $19/29^{\circ}C$ (night/day) and the other at $13/23^{\circ}C$ as the low - temperature study on ripening. For the cultivars at $13/23^{\circ}C$ (low temperature study), JB and JJ had a ripening rate of 93% which is similar to the ripening rates of cultivars at $19/29^{\circ}C$ at 45 days after heading (DAH). In contrast, GY and HW recorded lower ripening rates of 86% and 57% respectively. However, when the cultivars at $13/23^{\circ}C$ were harvested at 61 DAH (when the accumulated temperature reached $1100^{\circ}C$), the difference in ripening rates compared to the 4 cultivars of $19/29^{\circ}C$ harvested at 45 DAH was not obvious (JB 94%, JJ 97%, GY 97%, HW 88%). Starch content showed little difference among the 4 cultivars at different temperature conditions while amylose content was higher for cultivars at $13/23^{\circ}C$ compared to those at $19/29^{\circ}C$. In addition, the enzyme activities of starch biosynthesis were about 5~10 days slower in cultivars at $13/23^{\circ}C$ compared to cultivars at $19/29^{\circ}C$. The grain-filling rate showed highly significant correlations with the enzyme activities of Sucrose synthase ($R^2=0.70^{***}$), ADP glucose pyrophosphorylase ($R^2=0.63^{***}$), UDP glucose pyrophosphorylase ($R^2=0.36^{***}$), Starch synthase ($R^2=0.51^{***}$), and Starch branching enzyme ($R^2=0.59^{***}$). Among the enzymes, Sucrose synthase activity had the highest correlation coefficient with grain-filling rate. In conclusion, the activity of enzymes such as Sucrose synthase, UDP glucose pyrophosphorylase, ADP glucose pyrophosphorylase, Starch synthase, Starch branching enzyme in starch biosynthesis is proven to be highly related to the grain filling process. Notably, the decrease in the activity of Sucrose synthase and Starch branching enzyme and the late increase in ADP glucose pyrophosphorylase activity at low temperature in the ripening stage are considered to be disadvantageous as they delay ripening and increased amylose content.

• Journal of Korea Foundry Society
• /
• v.36 no.5
• /
• pp.153-158
• /
• 2016

The lost foam casting process was used to fabricate Al-Si-Mg cast specimens, and the effects of the chemical composition and process variables on the tensile properties and the mold filling ability were investigated. Some porosity formation was observed in thick sections of the casting and better tensile properties were obtained for thin sections, presumably because of their lower porosity and the higher cooling rate. Tensile properties were not clearly enhanced by grain refining treatment with Ti; however, the elongation was significantly improved by Sr modification of the Al-Si-Mg alloy. The mold filling distance was generally proportional to the pouring temperature of the melt, and the distance was also increased by the addition of Ti.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.191-191
• /
• 2018

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.165-165
• /
• 2023

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.166-171
• /
• 2017

For high-quality colored rice production, the cultivation environment is a critical factor. The major environmental factor is temperature, which includes the accumulated and average temperature during vegetative and reproductive stages. Generally, during the cultivation period, the temperature can be controlled by shifting the transplanting date. This study was carried out to determine the optimum transplanting date for high-quality red-colored rice production. Four red-colored rice varieties (Jeokjinju, Jeokjinjuchal, Hongjinju, and Gunganghongmi) were used as test materials. The transplanting dates were May 20 and June 5, 20, and 30 in 2015~2016. The most variable factor controlled by the transplanting date was the grain filling rate. The varieties transplanted on June 30 showed low yields owing to the decrease in the grain filling rate. In contrast, the polyphenol content increased with increasing delay in the transplanting date. Collectively, these two results indicate that the optimum transplanting date was June 20. The average temperature for 30 days after the heading date (30DAH) highly affected the polyphenol content. A lower temperature during the 30DAH induced higher polyphenol contents but also caused low yield. The optimum 30DAH temperature for obtaining a higher yield and polyphenol content was $22{\sim}23^{\circ}C$. Using the average 30DAH and accumulated temperatures, the optimum transplanting date was calculated as June 18 to 24 in Miryang region. The optimum transplanting date of Kyeungsangnamdo region was approximately mid-June to early July, and that of Kyeungsangbukdo region was approximately early to mid-June.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.174-180
• /
• 2014

This study was conducted to know the effect of low radiation during grain filling stage of rice on its grain yield, components, physicochemical properties and palatability, compared to the effect of natural light. Ripened grain ratio, 1000 grain weight of brown rice, milled rice yield of Mipum, Hopum, and Sindongjin were reduced as the shading treatments become higher. After harvest, physicochemical properties of rice influencing eating quality were investigated. Protein content of milled rice was increased, but palatability was decreased by shading treatments. Change of milled rice proteins and palatability due to shading treatments were found to be less in Mipum than that in Hopum and Sindongjin. With regard to amylogram properties, shading treatments resulted in a significant decrease in peak trough final breakdown viscosities of rice flour, though it increased pasting temperature and setback viscosity. The degree of the 55% shading effect was more intensive than the 35% shading effect in changes of ripened grain ratio, 1000 grain weight of brown rice, milled rice yield and milled rice protein.