• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.142-142
• /
• 2017

Wheat (Triticum asetivum L.) is one of the major grain crops worldwide. The reduced productivity ascribed by adverse environment is increasing the risk of food security. Wheat cultivars have been actively released by public side since 1960s in Korea. Each variety has been developed for superior regional adaptation, pest resistance and mostly high yield. Heat stress tolerance is one of the major parameters that threaten wheat production in Korea. Heat stress during grain filling period has been conceived as critical level and directly influences on wheat production. We evaluated 11 common wheat cultivars ("Baegjoong", "Dajung", "Goso", "Hanbaek", "Jokyoung", "Joeun", "Jopum", "Keumgang", "Olgeuru", "Sinmichal", "Uri") that were exposed to abnormally high temperature during the grain filling period. Each plant was grown well in a pot containing "Sunshine #4" soil in controlled phytotron facility set on $20^{\circ}C$ and 16 h photoperiod. At 9 day-after-anthesis (DAA9), plants were subjected to a gradual increase in temperature from $20^{\circ}C$ to $33^{\circ}C$ and maintained constantly at $33^{\circ}C$ for 5 days. After the treatment, plants were subjected to gradual decrease to normal temperature ($20^{\circ}C$) and continue to grow till harvest. Seeds were harvested from each tiller/plant. Total chlorophyll contents decrease level as well as grain parameters were measured to evaluate varietal tolerance to heat stress. We also divide each spike into five regions and evaluate grain characteristics among the regions in each spike. The obtained results allow us to classify cultivars for heat stress tolerance. The pedigree information showed that typical wheat lines provide either tolerance or susceptible trait to their off-springs, which enable breeders to develop heat stress tolerance wheat by appropriate parental choice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1986.06a
• /
• pp.24-25
• /
• 1986

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.439-444
• /
• 1983

Effects of temperature and soil moisture on the growth and grain-filling of two wheat cultivars were investigated. Two levels of temperature; day 3$0^{\circ}C$/night $25^{\circ}C$ and day 2$0^{\circ}C$/night 15$^{\circ}C$ and two levels of soil moisture; stressed (45-50% of F.C.) and non-5tressed (50-60% of F.C.) were imposed in the green house from heading date to the maturity and grain weight, chlorophyll content of flag leaf and leaf area index(LAI) were observed at weekly interval. Grain maturation was faster in the high temperature than those in the lower temperature. Chlorophyll content of flag leaf and LAI decreased rapidly in the high temperature and chlorophylls disappeared at the 20 days after heading. In lower temperature condition, slower decrements were shown in chlorophyll content and it remained until 45 days after heading. Grain weights in the high and optimum temperature conditions reached to maximum values at 29 days and 45 days after heading, respectively. Differences of grain weight and chlorophyll content of flag leaf were not significant between stressed and non-5tressed soil moisture condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.662-669
• /
• 1995

To clarify the effect of temperature during ripening on grain quality, rice plant which was grown under normal natural conditions untill heading stage was subjected various temperature regimes during grain filling stage. Three varieties, Odaebyeo, Hwaseongbyeo and Dongjinbyeo were used. Grains on primary and secondary-rachis branches were harvested seperately and measured specific gravity, grain size and weight. The optimum daily temperature for grain filling of rice during ripening period was about 22$^{\circ}C$ and grain filling under alternating temperature(26/18$^{\circ}C$, day /night) was better than constant temperature (22 /22$^{\circ}C$) based on 1, 000-grain weight and yield. Grain size based on volume per grain was smallest under the constant temperature of 22 /22$^{\circ}C$. The size of secondary-rachis branches was smaller than primary-rachis branch. The difference in size between primary and secondary-rachis branches was biggest in Hwaseongbyeo, followed by Odaebyeo and Dongjinbyeo. The temperature regimes treated did not influence the grain size difference between branches so much. The 1000-grain weight was lighter under high temperature than low temperature in Odaebyeo, but reversed tendency was observed in Dongjinbyeo of secondary rachis-branches.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2011.11a
• /
• pp.16-18
• /
• 2011

Evaluation of climate change on the rice productivity was conducted using crop growth simulation model, where Odae, Hwaseong, Ilpum were used as a representative cultivar of early, medium, and medium-late rice maturity type, respectively, and climate change scenario 'A1B' was applied to weather data for future climate change at 57sites. When cropping season was fixed, rice yield decreased by 4~35% as climate change which was caused by poor filled grain ratio with high temperature and low irradiation during grain-filling. When cropping season was changed, rice yield decreased by only 0~5% as climate change which was caused poor filled grain ratio with low irradiation during grain-filling period. However, this irradiation decline was less than when cropping season was fixed. Therefore, we need to develop rice cultivars resistant to low irradiation which can maintain high filled grain ratio under poor irradiation condition, and late maturity rice cultivars whose growing period is longer than the present medium-late maturity type.

• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.184-193
• /
• 1995

Effects of process parameters during thixocasting, such as solid volume fraction, mold temperature and extrusion ratio, on the mold filling behaviour and fluidity of Mg alloy(AZ91D) have been investigated. The semi-solid ingot held for 60 minutes at the semi-solid temperature range did not contain the equilibrium volume fraction of solid as expected from the phase diagram. Therefore, in order to obtain the desired solid fractions, and to suppress the exaggerated grain growth during heating, it was required to heat the ingot rapidly up to the temperature $10^{\circ}C$ higher than the semi-solid temperature suggested from the phase diagram for a specific volume fraction of solid. The experimental results show that mold filling behaviour and fluidity can be improved with the use of the higher mold temperature and the lower volume fraction of solid, but remain nearly unaffected by the change of extrusion ratio.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2012.07a
• /
• pp.145-148
• /
• 2012

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.43-43
• /
• 2017

During grain filling period, rice is affected by many environmental factors; including temperature, water, radiation and soil nutrition condition. In future climate, greater shading and heat tolerance will be required in rice. In this study, the effect of shading and high temperature on spikelet sterility was conducted on fourteen Vietnamese cultivars. Field experiments were studied in 2015 and 2016 to evaluate the response of Vietnamese cultivars under high temperature during grain filling stage. The high temperature and shading were applied by closing two sides of growth chamber and covered by a black cloth (50% reduced solar radiation) under the field condition after the first cultivar heading. The sterility increased significantly under high temperature and shading. The highest percentage sterile spiketlets was observed in 'Jasmine 85' (71.7%) under shading and in 'OM4900' (53.4%) under high temperature in 2015 and 2016, respectively. Among the treatments, the percentage of sterile spekelets in Vietnamese cultivars under shading was highest which was 54.9% and 41.8% in 2015 and 2016, respectively. Yield components reduced significantly in both of shading and high temperature. Corresponding with significantly decrease in yield components, the yield in high temperature and shading decreased strongly in both 2015 and 2016.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.182-191
• /
• 2020

A field test and a phytotron study were performed over two years to examine whether rice varieties originated from higher altitude areas have lower optimum grain filling temperatures for yield improvement than the varieties from South Korea. Three varieties originated from North Korea and three varieties from northern China were compared to the same number of varieties from South Korea. In a field study, the optimum grain filling temperatures over 40 days after heading were 22.6 - 23.0℃, 21.5 - 22.3℃, and 21.5 - 23.6℃ for the varieties from North Korea, northern China, and South Korea, respectively, resulting in no significant difference among varietal groups. Meanwhile, the heading dates of the early maturing varieties from North Korea and China were 7 - 12 days earlier than that of the early maturing Odae variety from South Korea during the first transplant of 2017. The phytotron study, in which different temperature regimes were imposed from flowering/fertilization to harvest with constant daily mean temperatures, revealed that milled rice weight did not decrease under low temperatures, even at 16℃, compared to that at 22℃. At the fourth transplant in the field study, mean temperature lower than 10℃ appeared before rice grains were fully developed, resulting in yield reductions. It was concluded that rice varieties adaptable to high-altitude areas do not have lower optimum grain filling temperatures but, instead, possess shorter growth durations. It was further suggested that the optimum grain filling temperature of rice observed under natural conditions could be attributed to the lowering temperature at the late filling stage under temperate climatic conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.300-300
• /
• 2017

'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.