• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.436-441
• /
• 1985

The study was conducted to provide basic information to breeders and agronomists working with sesame. The grain weight and germinability were investigated for eight plant types classified by branching habit, capsules per axil, and carpels and loculi of a capsule. Two typical cultivars were chosen for each plant type among 527 gene pools. Dry weight of one thousand grains was increased rapidly from 25th to 35th day after flowering, and reached peak on 40th day after flowering in upper part capsules and 45th day after flowering in lower and middle part capsules, so that this period was considered to be of physiological maturity in each capsule bearing part. Side capsules on main stem and branch capsules were lighter than central ones of main stem, and upper capsules of four carpels eight loculi type decreased more seriously. BTB type demonstrated relatively better growth compared to the growth of BTQ type in one thousand grain weight. The maximum grain filling duration for germination percentage increased rapidly up to 40th day after flowering. Above 70% germinability was obtained from 40th day after flowering. Harvesting time of physiological maturity was considered to be 45th day after flowering with peaks of 2.14g of one thousand grain weight, 26% of grain water content and 90% of germinability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.342-351
• /
• 1990

Experiments were conducted to find out the possibilities of producing good quality seed of summer type soybean at Chuncheon, 74m above sea level and Jinboo, 600m above sea level in 1987. Local variety, Cheonan Jaelae was used. Seeds were sown June 25 harvested five times from 35 days after flowering with five days interval to 55 days. Vegetative period was longer in the early planting and high cool area, Jinboo, which resulted longer stem length than the late planting and in the plain area, Chuncheon. Pod number and 100 grain weight were shown more and heavier in Jinboo. Earlier planting and later harvesting resulted more pod number and heaveier 100grain weight. Grain yield was heigher in Jinboo, and earlier plainting shown more grain yield and its difference was greater in Jinboo. Long grain filling duration resulted more grain yield. Unripened seeds were produced more by earlier planting with earlier harvesting and earlier planting with late harvesting showed the high rates of pod and stem blight (Diaporthe Phaseolorum). Seed With high moisture content by early harvesting showed more rotten seeds in all planting dates production was more advantageous in the high cool area, Jinboo. Optimum planting date was between May 15 and June 5. Harvesting was desirable about 45-50 days after flowering with heigher germination rate seed yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.180-183
• /
• 2001

This study was conducted to find out the effect of ripened grain and rice quality by the breeding of rice dust mite (Steneotarsonemus spinki). Growth temperature of sample (Suwon 441 and Ilpumbyeo) was maintained from 22$^{\circ}C$ (during night) to 26$^{\circ}C$ (during day) in a controlled phytotron. Plant hight and number of panicle could not showed the difference by the discoloration degree of leaf sheath. But number of spikelet was reduced affected by discoloration degree of leaf sheath. Ratio discoloration of grain was increased according to circumstances more discoloration degree of leaf sheath in Suwon 441 then Ilpumbyeo. The perfect rice grain was observed to similar Suwon 441 and Ilpumbyeo in the IV degree of ratio discoloration of grain, but less Suwon 441 than Ilpumbyeo in III and II, in such a case comparison between coloration and discoloration.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.168-168
• /
• 2017

Drought conditions during cultivation reduce agricultural production yield less than a theoretical maximum yield under normal condition. Plant specific NAC transcription factors in rice are known to play an essential roles in stress resistance transcriptional regulation. In this study, we report the rice (Oryza sativa L japonica) NAM, AFTF and CUC transcription factor OsNAC17, which is predominantly induced by abiotic stress in leaf, was contribute to the drought tolerance mediated reactive oxygen species (ROS) in transgenic rice plants. Constitutive (PGD1) promoter was introduced to overexpress OsNAC17 and produced the transgenic PDG1:OsNAC17. Overexpression of OsNAC17 throughout the whole plant improved drought resistance phenotype at the vegetative stage. Morphological characteristics such as grain yield, grain filling rate, and total grain weight improved by 22~64% over wild type plants under drought conditions during the reproductive stage. The improved drought tolerance in transgenic rice was involved in reducing stomatal density up to 15% than in wild type plants and in increasing reactive oxygen species-scavenging enzyme. DEG profiling experiment identified 119 up-regulated genes by more than twofold (P<0.01). These genes included UDP-glycosyltransferase family protein, similar to 2-alkenal reductase (NADPH-dependent oxireductase), similar to retinol dehydrogenase 12, Lipoxygenase, and NB-ARC domain containing protein related in cell death. Furthermore, OsNAC17 was act as a transcriptional activator, which has an activation domain in C-terminal region. These result demonstrate that the overexpression of OsNAC17 improve drought tolerance by regulating ROS scavenging enzymes and by reducing stomatal density

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.1-4
• /
• 2012

Effects of artificial holes on the cooling efficiency of single grain YBCO bulk superconductors were studied. Single grain YBCO bulk superconductors without artificial holes, with six 2.4 mm holes and six holes filled with Bi-Pb-Cd-Sn metal solder were fabricated by a top-seeded melt growth process for powder compacts with/without holes. Simulation for the cooling rate to a liquid nitrogen temperature (77 K) of YBCO samples was carried out using a finite element method (FEM) and the results are compared with the actual cooling rates of samples in liquid nitrogen. The simulated cooling times for the YBCO sample without holes, with six holes and with six holes filled with the metal solder were 80, 47 and 75 sec. respectively, which are similar to the actual cooling times of 84, 52 and 78 sec. estimated for the same samples cooled in liquid nitrogen. The shorter cooling time of the sample with artificial holes are attributed to the increased surface areas associated with the presence of artificial holes. The metal filling into the holes did not give any remarkable effect on the cooling efficiency.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.2
• /
• pp.156-164
• /
• 2015

High temperature stress would affect rice production in the future as heat wave is expected to occur frequently under climate change conditions. The objective of this study was to obtain rudimentary information to assess the impact of heat stress on rice yield and its yield component in Korea. Two rice cultivars "Hwaseongbyeo" (Japonica) and "Dasanbyeo" (Tongil-type) were grown at different nitrogen fertilization levels in two seasons. These cultivars were grown in 1/5000a Wagner pot placed within four plastic houses where temperature was controlled at ambient, ambient$+1.5^{\circ}C$, ambient$+3^{\circ}C$ and ambient$+5^{\circ}C$ throughout the rice growing season in Suwon ($37^{\circ}16^{\prime}N$, $128^{\circ}59^{\prime}E$), Korea. The degree of temperature change affected grain yield whereas the level of nitrogen had little impact on grain yield. The number of panicle per pot and spikelet per panicle were not significantly different among temperature treatments in both cultivars tested. In contrast, 1000-grain weight and ripened grain ratio were decreased significantly under the treatments raising the air temperature to the level of $5.0^{\circ}C$ and $1.5^{\circ}C$ above the ambient air temperature in Dasanbyeo and Hwaseongbyeo, respectively. Reduction of 1000-grain weight and ripened grain ratio under the temperature treatments of $3.0^{\circ}C$ and $5.0^{\circ}C$ above the ambient air temperature resulted in significantly less grain yield for Dasanbyeo and Hwaseongbyeo, respectively. The greater sensitivity of grain yield to temperature increase in Dasanbyeo was attributable to the sharp decrease of 1000-grain weight and ripened grain ratio with the temperature rise above $23^{\circ}C$ during ripening period. On the other hand, Hwaseongbyeo had little variation of them in the temperature range of $23-27^{\circ}C$. These results suggested that grain yield would decrease under future climate conditions due to grain weight decreased by shorter grain filling period as well as the ripened grain ratio reduced by spikelet sterility and early abortion of rice kernel development. Thus, it would be essential to use cultivars tolerant to heat stress for climate change adaptation, which merits further studies for developing varieties that have traits to avoid spikelet sterility and early abortion of rice kernel, e.g., early morning flowering, under heat wave.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.388-391
• /
• 2004

This research investigates how the fineness modulus of fine aggregates and the grain shape of coarse aggregates affects flow characteristics, packing characteristics and compressive strength characteristic. The experimental results, show that increase of the fine aggregate's fineness modulus improved concrete flow, but filling ability was high at over KS regulation extent due to segregation phenomena. It is considered that the improvement of 0.1 spherical rate was effective to concrete fluidity elevation by reducing about $6\%$ of fine aggregate ratio displays which the smallest gap rate of aggregate. Compressive strength was increased to about 0.6MPa everytime F.M. 0.1 of fine aggregate fineness is increased. However, it was decreased to about 9MPa at F.M. 3.5 compared to F.M. 3.0.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.153-156
• /
• 2006

This study investigated influence of kind of fine aggregate on fundamental properties of concrete. For the properties of fluidity with various type of fine aggregate, lime stone crushed fine aggregate(Ls) exhibited favorable result, due to grain shape and particle distribution, and next was granite crushed fine aggregate(Gs), natural fine aggregate(Ns). Ns had the highest value of air content while Ls had the lowest, due to the effective filling performance by continuos particle distribution. Ls, Ns, Gs in an order had higher bleeding capacity and faster setting time. However, compressive and tensile strength value exhibited similar tendency, regardless of aggregate type.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.223-234
• /
• 1987

This paper describes the mode of occurrence and mineralogical properties of electrum from the Namseong Gold-Silver deposits, for the purpose of obtaining data on the characteristics of the ore deposits and the behavior of gold and silver during the mineralization. The gangue minerals are quartz, calcite, fluorite. Ore minerals are mainly composed of pyrite, sphalerite, chalcopyrite and galena with minor amount of argentite, electrum, pyrargyrite, native silver and unidenfied mineral(Cu-Fe-Ag-S series). Three stage of mineralization recognized are, from early to later, (I) pyrite-electrum stage (II) sphalerite-chalcopyrite-galena-argentite-electrum stage (III) sulfosalts stage. The filling temperature of fluid inclusions in quartz ranges from $225^{\circ}$ to $335^{\circ}C$. The value of sulfur fugacity estimated by means of electrum-tarnish method ranges from $10^{-11.5}$ to $10^{-14}$ atm. The compositional heterogeneity within a single grain with respect to gold concentration is common in the Namseong electrums Chemical composition of electrum ranges generally between 25~45 atom% Au. Its gold content decreases in late stages of mineralization.

• Korean Journal of Remote Sensing
• /
• v.31 no.1
• /
• pp.11-20
• /
• 2015

This study aimed to investigate the canopy growth conditions and the accuracy of phenological stages of paddy rice using ground-based remote sensing data. Plant growth variables including Leaf Area Index (LAI) and canopy reflectance of paddy rice were measured at the experimental fields of Chonnam National University, Gwangju, Republic of Korea during the crop seasons of 2011, 2012, and 2013. LAI values were also determined based on correlations with Vegetation Indices (VIs) obtained from the canopy reflectance. Three phenological stages (tillering, booting, and grain filling) of paddy rice could be identified using VIs and a spatial index (NIR versus red). We found that exponential relationships could be applied between LAI and the VIs of interest. This information, as well as the relationships between LAI and VIs obtained in the present study, could be used to estimate and monitor the relative growth and development of rice canopies during the growing season.