• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.826-832
• /
• 2010

A total of ninety swine ($79.0{\pm}2.2\;kg$) were employed for 58 d to determine the meat quality of pigs fed fermented agricultural by-products (FAB) mainly consisting of brewers grain shell. FAB was replaced with commercial feed at dietary levels of 20%, 40%, 60%, 80%, and 100% (T1) and 30%, 60%, 100%, 100%, and 100% (T2) at 1, 2, 3, 4 and 5-9 wk, respectively. Compared with the control (CON) feed, FAD feed had lower moisture and nitrogen-free extract content, and higher crude fat, crude fiber, and total calorie (p<0.05). The protein content, amino acid profile, and pH values of pork loin were not affected by dietary treatment. However, higher moisture, crude ash, and meat cholesterol, and lower fat, were found in CON compared with treatment (p<0.05). FAB treatment significantly improved drip loss and cooking loss value (p<0.05), and increased the CIE $L^*$ values of loin and back-fat surface, whereas it decreased the CIE $a^*$ values of loin surface (pp<0.05). The results indicate that dietary FAB affected meat cholesterol and fat content, and improved drip loss and cooking loss, but had no affect on amino acid composition.

• Korean Journal of Environmental Biology
• /
• v.32 no.2
• /
• pp.138-152
• /
• 2014

The objective of the study survey was to determine the effect of marine sand extraction on community composition and rate of recolonization of the meiobenthos following cessation of mining activities. Because of meiobenthic distribution in nature, high abundance, intimate association with sediments, fast reproduction, benthic larva period, sensitivity to pollution and rapid life histories, meiobenthos are widely regarded as ideal organisms to study the potential ecological indicator of natural and anthropogenic stresses. The community structure of meiobenthos was studied at seven stations within sandy tidal and sub tidal zones in Jangbongdo in the Yellow Sea, Korea from Aug. 2006 to Dec. 2007. Meiobenthic samples were collected by three core samples, with a 3.6 cm in diameter, from each sediment sample taken with a Smith-McIntyre Grab. It was found that sand mining often causes complete removal of the sediment and the damage to the habitats of meiobenthos. This study in the effect showed that sand mining resulted in a reduction in total abundance and biomass of meiobenthos in mining area. The finding of this study further showed that initial restoration of abundance and biomass within one year of the cessation of sand mining.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.320-331
• /
• 1995

The closely spaced cores were analyzed to find detailed reconstruction of paleoenvironments and sealable changes along the Delaware Bay coast. Three areas, Kitts Hummock Beach mars, the St. Jones River marsh, and Bowers marsh near the St. Jones River's mouth, were chosen because these areas are compose of their own geomorphic characteristics and sea-level history. since significance of the stratigraphic correlations was to determine sedimentary fancies and paleoenvironments, multidisciplinary methods such as lithological description, grain-size analysis, organic/inorganic content, water content, mineral composition, botanical analysis, micropaleontological analysis, and /SUP 14/C datings were performed. Five major divisions of marsh environments were recognized in the stratigraphic sections: freshwater marsh, initialfreshwater marsh, slightly brackish marsh, brackish marsh, and salt marsh. Most of the lower part in the stratigraphic sections show freshwater marsh. On the top of this, either brackish marsh or tidal flat/tidal stream was recorded. The pro-Holocene sediments consist of sand, mud, and sandy mud, The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene sediments consist of sand, mud, and sandy mud. The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene surface within short distances permitted the concurrent development of variable environments such as freshwater marsh, brackish marsh or salt marsh at similar elevations. The freshwater marsh in this case was formed in the areas of isolation, so saline-water cannot encroach upon these areas. This complex development of paleoenvironments leads to a difficulty in stratigraphic correlation and interpretation of local relative sea-level changes. The deposition of subsurface sediments was affected by sediment supply, compaction, fluvial activity, biological competition, local tectonics and isostacy, climate and local relative sea-level changes. It was interpreted that the positions in the changes from freshwater environments to brackish environments or ice versa are the turning points of transgressions and regressions. Therefore, multiple transgressions and regressions were identified in the stratigraphic sections of the study area.

• Economic and Environmental Geology
• /
• v.17 no.2
• /
• pp.115-139
• /
• 1984

The Cu-Pb-Zn-Ag hydrothermal vein-type deposits which comprise the Sambong mine occur within calc-alkaline volcanics of the Cretaceous Gyeongsang Basin. The ore mineralization took place through three distinct stages of quartz (I and II stages) and calcite veins (III stage) which fill the pre-existing fault breccia zones. These stages were separated in time by tectonic fracturing and brecciation events. The reflection variations of one mineral depending on mineralization sequence are considered to be resulted from variation in its chemical composition due to different physico-chemical conditions in the hydrothermal system. The reflection power of sphalerite increases with the content of Fe substituted for Zn. Reflectances of the sphalerite grain are lower on (111) than on (100) surface. The spectral profiles depend on the internal reflection color. Sphalerite, showing green, yellow and reddish brown internal reflection, have the highest reflection power at $544m{\mu}$ (green), $593m{\mu}$ (yellow) and $615m{\mu}$ (red) wavelength, respectively. Chalcopyrite is recognized as biaxial negative from the reflectivity data of randomly oriented grains measured at the most sensitivity at $544m{\mu}$. The microindentation hardness against the Fe content (wt. %) for the sphalerite increases to 8.05% Fe and then decreases toward 9.5% Fe content. Vickers hardness of the sphalerite is considerably higher on surface of (100) than on (111). The relationship between Vickers hardness and crystal orientation of the galena was determined to be $VHN_{(111)}$ > $VHN_{(210)}$ > $VHN_{(100)}$. The softer sulfides have the wider variation of the diagonal length in the indentation. Diagonal length in the indentation is pyrite

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.2
• /
• pp.78-83
• /
• 2012

The structural change and the electrical conductivity with Sr content in $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_3$ (LSMCu) were studied. $La_{0.8}Sr_{0.2}MnO_3$ (LSM) and $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_3$ ($0.1{\leq}x{\leq}0.4$) were synthesized by EDTA citric complexing process (ECCP). A decrease in the lattice parameters and lattice volumes was observed with increase of Sr content, and these results were attributed to the increasing $Mn^{4+}$ ions and $Cu^{3+}$ ions in B-site. The electrical conductivity measured from $500^{\circ}C$ to $1000^{\circ}C$ was increased with increase of Sr content in the $0.1{\leq}x{\leq}0.3$ composition range, and it was 172.6 S/cm (at $750^{\circ}C$) and 177.7 S/cm (at $950^{\circ}C$, the maximum value) in x = 0.3. The electrical conductivity was decreased in x = 0.4 because of the presence of the second phase in the grain boundaries. The lattice volume was contracted by increase of $Mn^{4+}$ ions and $Cu^{3+}$ ions in B-site according to increase of Sr content and the electrical conductivity was increased with increase of charge carriers which were involved in the hopping mechanism.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.179-192
• /
• 2019

This study was performed to analyze the contents of food intake in middle school Home Economics textbook and the trends of food intake of middle school students in Korea to figure out the education direction of food intake. The contents of food intake were analyzed in major three kinds of middle school Home Economics textbook according to 2015 curriculum and the trends of food and nutrient intake were analyzed in 2,543 subjects aged 13 to 15 years using 2007~2015 Korea National Health and Nutrition Examination survey by logistic regression analysis or Pearson correlation coefficient. As a result, contents of food intake of textbook included food source of nutrient, food group name, necessity of eating diverse foods, recommended daily eating frequency of food group and menu planning according to meal composition guideline, however food intake trends were not included. Consumption of grains and grain products was increased until 2007 to 2010 year and was decreased after 2011 year(p=0.0012). Sugars and sweets, beverages and alcohols, and fish and shellfish consumption were increased during 2007~2015 year(p<0.0001). Carbohydrate, fat, vitamin A, thiamin and iron intakes were increased(p=0.0052), and energy ratio by carbohydrate was decreased(p=0.0009) and energy ratio by fat was increased(p<0.0001) during 2007~2015 year. Mean ratios of nutrient intake compared to the dietary reference intakes for Koreans were very low in dietary fiber(19-27%) and calcium(46-56%), but was higher in sodium(221-289%)(p<0.0001) regardless of year. There was a significant positive correlation between most food group intakes except sugars and sweets, bean and bean products, nuts and seeds, seaweeds, and beverages and alcohols and energy, protein, dietary fiber, vitamin A, riboflavin, calcium and iron intakes(p=0.0375). In the above, during the period from 2007 to 2015 year, intakes of sugars and sweets, beverages and alcohols, and fish and shellfish were increased, and intakes of dietary fiber and calcium were low and energy ratio by fat was increased, thus these trends are concerned to threaten nutritional balance and health of subjects. Therefore, Home Economics textbook of middle school needs to include food intake trends of adolescents with basic concepts to help them maintain balanced diet in the rapid change of food intake patterns for maintaining optimal nutrition and health.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.624-632
• /
• 2012

As there have been lately many worldwide resource challenges such as potential exhaustion of fossil fuels, sudden rise of oil price and ever-rising grain pricing due to global food crisis, there have been more interests focused on recycling vegetable oils and fats into clean natural fuel and producing new resources based on waste cooking oil as a part of reusing waste resources. An Experiment was performed by using ratio of 50:50, 75:25 (w/w) mixture of based rapeseed oil, camellia oil, and olive oil. 50:50, 25:75 (w/w) mixture of based palm oil. The result was that the oleic acid ($C_{18:1}$) got the lowest percentage of 42.8%, when we combined the mixture of rapeseed oil and soybean oil. While the highest percentage of 72.1% was when the mixture of camellia oil and rapeseed oil were combined at 50:50 ratio. In 75:25 (w/w) case, mixture of rapeseed oil and soybean oil got the lowest. The highest ratio was the mixture of camellia oil and olive oil. Based on the component of palm oil, the total saturated fatty acid was decreased. It is expected that stabilizing oxidation through controlling of fatty acid after mixture and that liquidity at a low temperature. The acid value indicated that stabilizing oxidation got a range of highest to lowest. Camellia oil ranked as the highest, followed by olive oil, and the oil seeds as the lowest in rank. Controlling iodine value through mixture and improvement of stabilizing oxidation will provide a good quality. The quality of color has no significant change about mixture in ratio and maintenance. The reduction of the cost of refining process is expected by controling of mixture ratio at biodiesel production in the future.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.523-535
• /
• 1994

The strata-bound type iron ore bodies in the Chungju mine are interbedded with metamorphic rocks which are intruded by Mesozoic granitic rocks. The iron ore deposit occurs as layer or lens shape which are concordant with the metamorphic rocks. The iron ore is classified into banded and massive types based on the mode of texture and occurrence. Grain size and iron-oxides tend to become coarser toward massive ore than banded ore. Banded ores commonly contain internal layers defined by alternating magnetite- rich, hematite-rich, magnetite-hematite, and quartz-rich mesobands. The banded iron ore consists of hematite, magnetite, quartz, feldspar, and minor amounts of biotite, muscovite, chlorite, carbonates, epidote, allanite, and zircon. Massive ores which are characterized by high magnetite content occur in contact of granitic rocks. The massive iron ores consist mostly of magnetite and quartz, with minor amounts of hematite, pyrite, microcline, biotite, muscovite, chlorite, carbonates, epidote, allanite and zircon. Magnetite from banded and massive ores is almost pure $Fe_3O_4$ in composition, including 0.14 to 0.27 wt.% MnO and 0.10 to 0.15 wt.% MnO, respectively. Hematite of the ore contains 0.87 to 1.27 wt.% $TiO_2$ in banded ore and 3.44 to 6.96 wt.% $TiO_2$ in massive ore, respectively. Biotite shows a little compositional variation depending on ore types. Biotite of the banded ore has lower FeO, $TiO_2$ and $Al_2O_3$, and higher MgO and $SiO_2$ than the massive ore. The modes of occurrence and petrography of ore implies that massive ores might have been formed either under more reducing environments or higher temperature condition than banded ore. Banded ores might represent early episode of iron enrichment due to regional metamorphism. Massive ores might be related to the contact metamorphism resulting from late granitic intrusion.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.375-381
• /
• 2018

The consumption of oats (Avena sativa L.) with high nutritional utility is accelerating due to the increased consumers' demand for functional foods. In Korea, naked oats are used as food, while covered oats are used for animal feed. However, it is difficult to distinguish naked oats from covered oats when the husk is removed from the grains by a special process. The present study was carried out to investigate experimental methods that would be beneficial in the segregation of different types of oats after husk removal. Grain quality-related biochemical compounds were analyzed in a bid to differentiate the oat dehulling characteristics. In addition, 61 SSR markers were examined for genetic relationship and variety identification of oats using five naked and seven covered oat varieties. Results showed that, the contents of protein, lipid, and ${\beta}-glucan$ were not significantly different among the oat varieties and this could not be used as an index for distinguishing oats husk character. However, in the fatty acid composition ratio,, naked oats had a higher ratio of stearic acid (C18:0) and oleic acid (C18:1) than covered oats, and covered oats had a higher ratio of linoleic acid (C18:2) and linoleic acid (C18:3) than naked oats. The assessment of SSR marker genotype revealed that 33 polymorphic bands among 12 oat varieties and 1 variety could be distinguished through the combination of polymorphic markers thus indicating the usability of these markers for variety identification in oats.