• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.560-571
• /
• 2006

The purpose of this study was to determine composition of food groups appropriate for the evaluation of the quality of total diet or food guide, using the data from the 1998 National Health and Nutrition Survey. Twenty-four-hour-dietary recalls of total 1,110 Korean adolescents aged 13 - 19 years (male 543, female 567) were analyzed for food group consumed (Dietary Diversity Score, DDS), intake patterns of food group, mean index of nutritional quality (mINQ) and nutrient adequacy ratio (NAR). Considering Korean food pattern different from the Americans, this study is to check if Korean 5 food groups with both of oil & sugar group and vegetable & fruit group, and a minimum amount of 30 g in grain group and 15 g in meat group modified from Kant's minimum amount, 15 g in grain and 30 g in meat, could also be appropriate for the diet evaluation of Korean adolescents. Combination of food group and minimum food intake per each food group used in the first trial were categorized into 6 kinds of types: 1) American 5 food groups with Kant's minimum amount as control or 2) American 5 food groups with modified Kant's minimum amount 3) Korean 5 food groups excluded by sugar with the modified amount 4) Korean 5 food groups with modified amount 5) American food groups added oil group with the modified amount 6) American food groups added oil & sugar group with the modified amount. In case of oil group or oil and sugar group, 5 g was quoted for the minimum amount. Correlation between DDS and indices of other diet quality in each type of food group composition were analyzed and the best food group composition was traced by comparing the correlation coefficients of DDS and mINQ or MARs at ${\alpha}\;<\;0.01$. There was no meaningful difference in weight length index of the subjects of eating or not-eating oil or oil & sugar, while the values of mINQ showed higher in the subjects eating oil but no difference in the subjects eating oil & sugar, compared to the group not-eating, respectively. In comparison of type 1 and type 2, correlation between DDS and indices of other diet quality showed higher in type 1 using Kant's amount. And comparing the type of a combined group of fruit & vegetable (type 3 and 4) and the type of separated group of fruit and vegetable (type 5 and 6). six groups of separated vegetable and fruit showed the higher correlation of DDSs and indices of diet quality. In case of being classified into six groups with oil, DDS showed correlation of r = 0.293 with INQ. While, being classified into six groups with oil & sugar instead of oil only, DDS showed correlation of r = 0.249 with INQ. Accordingly the type 5 with oil is regarded as the better food group type than the type 6 with oil & sugar. Since better result was shown in the composition of six groups with Kant's minimum amount, the comparative analysis on both of type1 with oil and oil & sugar was finally performed. Then oil added type 1 showed higher correlation of DDS and indices of diet quality. These result indicated that it would be more appropriate to use six food groups with separate vegetable and fruit including oil group (oil-added type 1) rather than oil & sugar group for evaluation of dietary quality of Korean adolescents using DDS.

• Korean Journal of Weed Science
• /
• v.32 no.1
• /
• pp.25-34
• /
• 2012

Characteristics related to grain quality and physiochemical components such as mineral, total amino acid, free amino acid, and free sugar composition were investigated in Protox inhibitor resistanttransgenic rice (MX, PX, and AP37) and its nontransgenic counterpart (WT). Head rice, palatability, protein, and whiteness (except for MX and AP37) of milled transgenic rice were high or similar to those of the non-transgenic counterpart. Immature rice, unfilled grain, and cracked kernels (PX and AP37) of milled transgenic rice were lower than those of its non-transgenic counterpart. However, there were no significant differences in damaged grain between the transgenic rice lines and its counterpart. Potassium content in PX and copper contents in PX and AP37 were only low compared with their non-transgenic counterparts, but other mineral contents in transgenic rice lines were high or showed no significant differences compared with non-transgenic counterparts. Contents of most total amino acid composition in transgenic rice lines were high or similar to those in non-transgenic counterparts, but the content of isoleucine in AP37 was only low compared with its non-transgenic counterpart. On the other hand, free amino acid, leucine and tyrosine in PX and AP37, and total free amino acid in PX were low compared with their non-transgenic counterparts. However, the content of free amino acid in other kinds in transgenic rice lines were similar to those in their non-transgenic counterparts. Contents of sucrose in MX and PX were low compared with non-transgenic counterpars, but contents of fructose, glucose, and maltose in transgenic rice lines were high or similar compared with their non-transgenic counterparts. This results indicated that Protox genes had no negative affect on the nutritional composition of rice.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.255-260
• /
• 2006

The basic composition of Ni-Zn ferrite was $(Ni_{0.35}Cu_{0.2}Zn_{0.45})_{1.02}(Fe_2O_3)_{0.98}$ (group A) and $(Ni_{0.4}Cu_{0.2}Zn_{0.4})_{1.02}(Fe_2O_3)_{0.98}$(group B) with additional 0.1 mol% $CaCO_3$ and 0.03 mol% $V_2O_5$. For high permeability and acceleration of grain growth, $CaCO_3$ and $V_2O_5$ was added. The mixture of the law materials was calcinated at $600^{\circ}C$ for 2 hours and then milled. The compacts of toroidal type were sintered at different temperature ($1,050^{\circ}C,\;1,070^{\circ}C,\;1,100^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and physical properties such as density, resistivity, magnetic induction, coercive force, initial permeability, quality factor, and curie temperature of the Ni-Zn ferrite were investigated. The density of the Ni-Zn ferrite was $4.90{\sim}5.10g/cm^3$, resistivity revealed $10^8{\sim}10^{12}{\Omega}-cm$. The average grain size increased with the increase of sintering temperatures. The magnetic properties obtained from the aforementioned Ni-Zn ferrite specimens were 4,000 gauss for the maximum induction, 0.25 oersted for the coercive force, 2,997 for the initial permeability, 208 for the quality factor, and $202^{\circ}C$ for the curie temperature. The physical properties indicated that the specimens could be utilized as the core of microwave communication and high permeability deflection yoke of high permeability.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2003

Diffusion speed of Cu metal fine particle is fast better than CuO, so it will promote grain growth in sintering. In this paper, the influence on substituting Cu fine particle for CuO of NiCuZn ferrite with basic composition (N $i_{0.204}$C $u_{0.204}$Z $n_{0.612}$ $O_{1.02}$)F $e_{1.98}$ $O_{2.98}$ has been investigated with varying Cu/CuO ratio. The perfect spinel structure of sintered specimen at 90$0^{\circ}C$ was confirmed by the analysis of XRD patterns. The best condition was obtained when the ratio of Cu/CuO was 60%, and the permeability was 1100 and Ms was 87 emu/g in this condition. Cu has influenced on grain growth in sintering, substituting Cu fine particle for CuO could lower sintering temperature over the 3$0^{\circ}C$. After sintering, substituting Cu performed as good as CuO.s CuO.s CuO.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1619-1624
• /
• 2003

The effect of maize hybrid (Suco and Dekalb 765, DK 765), maturity stage (milk, $R_3$ and 1/2 milk line, $R_5$) and animal diet (Diet 1: 70% lucerne hay+30% maize silage; Diet 2: 50% maize silage+20% sunflower meal+30% maize grain) on ruminal stover dry matter (DM) degradability was studied. Additionally, morphological and chemical plant composition was evaluated. Fodder samples ground at 2 mm were incubated in three Holstein steers (400 kg body weight) using the in situ technique. Ruminal degradation kinetics was studied and the effective degradability (ED) was estimated for an assumed kp of 5%/h. The in situ data was analyzed in a complete randomized block design with the animals as blocks. Significant interactions between hybrid${\times}$diet and maturity${\times}$diet on kinetic digestion parameters were detected. In Diet 1, hybrids did not differ in degradable fraction, kd or ED, although a minor difference (p<0.05) in the soluble fraction was found (25.5 and 23.2% for Suco and DK 765, respectively). In Diet 2, the DK 765 had greater degradable fraction (p<0.001) but smaller (p<0.01) kd than Suco, without differences in the soluble fraction or in ED. Anticipating the harvest increased ED of stover from 37.5% in $R_5$ to 44.6% in $R_3$ (average values across hybrids and diets) due to the increase (p<0.001) in the soluble fraction ($R_5$: 22.6%, $R_3$: 28.8%). It is concluded that hybrids had similar stover in situ DM degradability and that soluble fraction represent the main proportion of degradable substrates. Advancing the date of harvesting may not improve the in situ DM degradability of whole maize plant silage since the increase in stover quality is counteracted by the depression in the grain-to-stover ratio. The diet of the animal consuming silage might not improve stover utilization either.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.608-612
• /
• 2005

Fourier transform-near infrared (FT-NIR) spectroscopy is a simple, rapid, non-destructive technique which can be used to make quantitative analysis of chemical composition in grain. An interest in total dietary fiber (TDF) of grain such as rice has been increased due to its beneficial effects for health. Since measuring methods for TDF content were highly depending on experimental technique and time consumptions, the application of FT-NIR spectroscopy to determine TDF content in milled rice. Results of enzymatic-gravimetric method were $1.17-1.92\%$ Partial least square (PLS) regression on raw NIR spectra to predict TDF content was developed Accuracy of prediction model for TDF content was certified for regression coefficient (r), standard error of estimation (SEE) and standard error of prediction (SEP). The r, SEE and SEP were 0.9705, 0.0464, and 0.0604, respectively. The results indicated that FT-NIR techniques could be very useful in the food industry and rice processing complex for determination of TDF in milled rice on real time analysis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.246-252
• /
• 2011

The semiconducting $MnSi_{1.73}$ compound has been recognized as a thermoelectric material with excellent oxidation resistance and stable characteristics at elevated temperature. In the present work, we applied mechanical alloying (MA) technique to produce $MnSi_{1.73}$ compound using a mixture of elemental manganese and silicon powders. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The MA powders were characterized by the X-ray diffraction with Cu-$K{\alpha}$ radiation, thermal analysis and scanning electron microscopy. Due to the observed larger loss of Si relative to Mn during mechanical alloying of $MnSi_{1.73}$, the starting composition of a mixture Mn-Si was modified to $MnSi_{1.83}$ and then $MnSi_{1.88}$. The single $MnSi_{1.73}$ phase has been obtained by mechanical alloying of $MnSi_{1.88}$ mixture powders for 200 hours. It is also found that the grain size of $MnSi_{1.73}$ compound powders analyzed by Hall plot method is reduced to 40 nm after 200 hours of milling.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.295-303
• /
• 1990

In this study, drought period when important agronomic characters of sesame plant is critical, was examined at different growth stages. Plant death by drought started at 40 days after drought in vegetative growth stage and 20 days, in reproductive growth stage. Obserbed by growth stage, drought damage in reproductive growth stage was more in jurious than vegetative growth stage. All the important agronomic characters was refreshed until 40 days and 20 days after drought in vegetative growth stage and reproductive growth stage respectively, but it could berefreshed after those times. Decrease rate of yield by drought ranged from 29 to 80% in vegetative growth stage and from 49 to 85% in respective growth stage. All the important agronomic characters except rate of ripeness showed positive association with grain yield under drought condition. Oil content in grain was decreaced by drought but composition of fatty acid was not affected by it.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.462-469
• /
• 2010

This study was conducted to investigate the physicochemical properties of Kefir. The general composition of Kefir cultured in skim milk or milk was, respectively, 90.0 and 87.8% water, 3.2 and 3.0% protein, 0.45 and 3.64% lipid, 3.96 and 4.14% lactose, and 0.77 and 0.68% ash. Titratable acidity(TA) and pH of Kefir were 0.77 and 4.55, respectively. The amount of $CO_2$ production was 6.23%, and the concentration of alcohol was 1.4%. Kefir grain as observed by scanning electron microscope was a complex mixture of lactic acid bacteria and yeast in a symbiotic association.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.869-874
• /
• 2010

Magnetoelectric composites with compositions (1-x)[0.5PZT-0.25PNN-0.25PZN](ferroelectric) - x[$(Ni_{0.9}Zn_{0.1})Fe_2O_4$](ferrite) in which x varies as 0, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0 were prepared by conventional ceramic process. The presence of two phases (ferroelectric phase with large grain and ferrite phase with small grain) in the particulate ceramic composites was confirmed by XRD, SEM and EDX. The ferroelectric and magnetic properties of the composites were studied by measuring the P-E and M-H hysterisis loop on the composite composition (x=0, 0.1, 0.2, 1), they were strongly affects of the phase content in composite. The magnetoelectric votage was measured as a function of DC magnetic field and the maximum magnetoelectric voltage coefficient of 14 mV/cm Oe was observed in x=0.2(80 mol% ferroelectric and 20 mol% ferrite phase).