• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.97-97
• /
• 2022

The yield characteristics of corn for feed by sowing period and the crude protein, crude fat, and coarse flour contents of grain in the harvesting period were compared. The varieties are Kwangpyeongok(KPO), Dapyeongok(DPO) and Pyeonggangok(PGO), and cultivation was tested by the National Food Engineering Department and the Central Crop Department. It was sown at a planting distance of 70×25cm on April 15, June 14, and July 15, 2021, and the amount of fertilizer was applied through soil inspection. For the growth characteristics, plant height, biomass and grain weight were investigated after 50 days of sowing, and general components were analyzed by drying and pulverizing each seed. Compared to the results of sowing in April, which is the right time to sow corn, all three varieties sown on June 14 showed an increase in biomass. In the case of sowing on July 15, the fresh weight of KPO and DPO decreased, and the grain weight of KPO and PGO decreased by 10-20% compared to the sowing in April. There was no significant difference in the crude protein content of grain according to the sowing seasons in April and June, but decreased in the corn sown in July. The crude fat content was highest in KPO sown on June 14 and DPO sown on July 15. Combining the yield and general composition results, it is thought that the cultivation of corn for feed in Suwon in the central part can be sown by mid-June.

• 한국육종학회지
• /
• 제43권5호
• /
• pp.470-478
• /
• 2011

밀가루 및 국수 면대의 색깔 변화에 영향을 미치는 요인을 분석하여 소비자가 선호하는 밝은 색택의 밀가루 및 국수 제조에 적합한 품종의 육성에 유용한 간편 분석법을 확립하고자 본 연구를 수행하였다. 국산밀 25 품종을 이용하여 종실 및 밀가루 특성과 저장기간 동안 국수 면대의 밝기 변화를 조사하였다. 종실의 PPO 활성은 천립중이 낮을수록, 종실 회분과 단백질 함량이 낮을수록 낮은 경향을 나타내었다. 종실의 PPO 활성은 총 폴리페놀 함량($r=0.609^{**}$), 철 함량($r=0.655^{**}$) 과 정의 상관을 나타내었다. 단백질 함량, 총 폴리페놀 함량, 철 함량 및 밀가루 색 밝기 등의 특성이 종실의 PPO 활성과 관련이 있었으며, 종실의 PPO 활성이 높은 품종일수록 국수 면대의 저장 기간 중에 면대 색이 보다 빠르고 어둡게 변색되었다. 국수 면대 색이 밝은 국내 밀 품종 개발을 위해서는 평가 방법이 용이하고 밀가루 및 국수 색깔과 높은 상관이 있는 종실의 PPO 활성을 육종 초기 세대에 평가해야 할 것으로 생각된다.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.381-388
• /
• 1993

Due to the anisotropy of thermal expansion, LAS system which has low thermal expansion property is hard to obtain a dense sintered body. Therefore, the thermal expansion coefficient and the mechanical strength were decreased. In this study, mullite, which has good mechanical properties in high temperature and comparatively low thmeral expansion coefficient, was taken as a additive in LAS system. And then, sintering, thermal, and mechanical properties were investigated. The results are follows; When mullite is added in eucryptite composition (Li2O.Al2O3.2SiO2) of LAS system, the creation of liquid phase results in the densification of sintered body and the specimen sintered at 136$0^{\circ}C$ for 2 hours shows optimum sintering condition. With the addition of mullite in eucryptite composition, mechanical strength is increased by the control of grain growth. Especially, flexual strength of EM0 specimen was about double value than the basic composition. Thermal expansion coefficients of EM0 and EM15 specimens sintered at 136$0^{\circ}C$ were -8.23$\times$10-6/$^{\circ}C$ and -4.90$\times$10-6/$^{\circ}C$ in the temperature range of RT.~80$0^{\circ}C$. As the mullite content are increased, negative thermal expansion ratios are decreased.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.610-614
• /
• 2016

Tyranno SA (SiC-polycrystalline fiber, Ube Industries Ltd.) shows excellent heat-resistance up to $2000^{\circ}C$ with relatively high mechanical strength. This fiber is produced by the conversion process from a raw material (amorphous Si-Al-C-O fiber) into SiC-polycrystalline fiber at very high temperatures over $1500^{\circ}C$ in argon. In this conversion process, the degradation reaction of the amorphous Si-Al-C-O fiber accompanied by a release of CO gas for obtaining a stoichiometric composition and the subsequent sintering of the degraded fiber proceed. Furthermore, vaporization of gaseous SiO, phase transformation and active diffusion of the components of the Si-Al-C-O fiber competitively occur. Of these changes, vaporization of the gaseous SiO during the conversion process results in an abnormal SiC-grain growth and also leads to the non-stoichiometric composition. However, using a modified Si-Al-C-O fiber with an oxygen-rich surface, vaporization of the gaseous SiO was effectively prevented, and then consequently a nearly stoichiometric SiC composition could be obtained.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.155-160
• /
• 2000

The piezoelectric properties and the doping effect for$0.95Pb(Zr_xTi_{1-x})O_3+0.05Pb(Mn1/3Nb2/3)O_3$ compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the values of kp and $\varepsilon33T$ were maximized, but Qm was minimized(Kp=0.57, Qm=1550) in the composition of x=0.51. In order to increase the values of Qm $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of kp decreased, and the values of Qm increased with doping concentration of $Nb_2O_5$. As a experiment results under high electric field driving, when vibration velocity was lower than 0.6[m/s], the temperature increase was $20[^{\circ}C]$, and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• 대한의생명과학회지
• /
• 제23권2호
• /
• pp.144-153
• /
• 2017

It was demonstrated that Gangjihwan (DF), which is the herbal composition composed of Ephedra intermedia, Lithospermum erythrorhizon, and Rheum palmatum, inhibits obesity and hepatic steatosis in high fat diet (HFD)-fed obese mice. The aim of this study was to determine the effects of DF on visceral obesity, hepatic inflammation and fibrosis and the mechanism of actions involved in this process using in vivo and in vitro approaches. DF was extracted with water (DF-FW), 30% grain alcohol (DF-GA30), and 70% grain alcohol (DF-GA70). Administration of DF to HFD-fed control mice decreased visceral tissue mass and visceral adipocyte size without adverse effects. Visceral fat mass was decreased by DF-GA30 and DF-GA70, and visceral adipocyte size by all three DF extracts compared with obese control mice. Histological analysis revealed that three kinds of DF extracts reduced toluidine blue-stained mast cells and collagen accumulation in the liver, the extents of which were most eminent in DF-GA70-treated mice. DF-GA70 decreased the mRNA levels of the inflammation ($TNF{\alpha}$ and VCAM-1), fibrosis (${\alpha}-SMA$), and apoptosis (caspase 3) genes, but increasing the anti-apoptosis gene (Bcl-2) mRNA levels in the liver of obese control mice. Consistent with the in vivo data, GA-70 also altered the expression of inflammation genes ($TNF{\alpha}$ and MCP-1) in HepG2 cells. These results indicate that DF not only inhibits visceral obesity, but also ameliorates visceral obesity-induced hepatic inflammation and fibrosis and that this process may be mediated by regulating the hepatic expression of inflammatory and fibrogenic genes.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.939-945
• /
• 2004

[ $SiO_2-B_{2}O_3-Al_{2}O_3-CaO-La_{2}O_3$ ]계 유리에서 $La_{2}O_3$를 변화시키며 다양한 조성의 유리를 만든 후 이를 다공성 알루미나에 침투시켜 알루미나-유리 복합체를 얻었다. 여기서 유리의 조성 변화에 따른 침투특성 및 기계적 강도의 변화를 관찰하였다. 유리중의 $La_{2}O_3$는 유리의 고온 점도를 감소시켜 유리의 젖음성과 유동성을 향상시키고 유리의 침투를 용이하게 한다. 유리가 다공성 알루미나에 침투하여 기공을 메우면서 일부 알루미나를 용해시킨다. 이 유리 용융물 중 $Al_{2}O_3$ 성분은 결정질 알루미나에 다시 석출하여 입자성장이 일어나는데 이때 특정 방향으로 알루미나 입자가 성장한다. $La_{2}O_3$가 20 몰 $\%$ 첨가된 유리를 침투시켰을 때 유리가 결정화하여 복합체의 강도를 증진시켰다.

• Progress in Superconductivity
• /
• 제13권2호
• /
• pp.127-132
• /
• 2011

Many research groups have been manufacturing coated conductor by various processes such as PLD, MOD, and MOCVD, but the methods with production cost suitable for wide and massive application of coated conductor did not develop yet. Spray pyrolysis method adopting ultrasonic atomization was tried as one of the possible option. GdBCO precursor films have been deposited on IBAD substrate by spray pyrolysis method at low temperature and converted to GdBCO by post heat treatment. Ultrasonic atomization was used to generate fine droplets from precursor solution of Gd, Ba, and Cu nitrate dissolved in water. Primary GdBCO films were deposited at $500^{\circ}C$ and oxygen partial pressure of 1 torr. After that, the films were converted at various temperatures and low oxygen partial pressures. C-Axis oriented films were obtained IBAD substrates at conversion temperature of around $870^{\circ}C$ and oxygen partial pressures of 500 mtorr ~ 1 torr in a vacuum. Thick c-axis epitaxial film with the thickness of 0.4 ~ 0.5 ${\mu}m$ was obtained on IBAD substrate. C-axis epitaxial GdBCO films were successfully prepared by ex-situ methods using nitrate precursors on IBAD metal substrate. Converted GdBCO films have very dense microstructures with good grain connectivity. EDS composition analysis of the film showed a number of Cu-rich phase in surface. The precursor solution having high copper concent with the composition of Gd : Ba : Cu = 1 : 2 : 4 showed the better grain connectivity and electrical conductivity.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.289-293
• /
• 2004

PNW-PMN-PZT ceramics were fabricated with the variations of Nb$_2$O$_{5}$ addition and their microstructural and piezoelectric characteristics were investigated. When the amount of Nb$_2$O$_{5}$ increased, grain size decreased gradually. At 0.3wt％ Nb$_2$O$_{5}$ which is the same weight percent with Fe$_2$O$_3$, maximum tetragonality(c/a) and density were shown due to the complexed doping effects. Also, this composition that showed Qm of 2,041, kp of 0.55, grain size of 2.5${\mu}{\textrm}{m}$ and $\varepsilon$r of 1704 were proper for high power application. Using this composition, Rosen-type piezoelectric transformer was fabricated as the size of 1 ${\times}$ 16 ${\times}$ 5㎣ and its electrical characteristics were investigated with the variations of load resistance and driving frequency. At the resistance of 200㏀, maximum step-up ratio of 13.68 was shown. After driving PDA CCFL for 25 min using the inverter circuit, at driving frequency of 214.4KHz, input voltage of 31.78 V and input current of 21.1mA were measured at the input part of piezoelectric transformer. And then, output voltage of 293.2 V and output current of 2.2mA were shown at the output part of piezoelectric transformer. At the same time, efficiency of 96.2％ and temperature rise of 3.5$^{\circ}C$ were appeared at the piezoelectric transformer.ormer.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.37-44
• /
• 1986

Yttria-antimonia-stabilized zirconia was investigated with respect to the amount of $Sb_2O_3$ addition in the range of 0.5~5mole% to the base composition of $(ZrO)_{0.92}(Y_2O_3)_{0.08}$ The sinterbility modulus of rupture Vickers hardness evaporation of components phase form-tion and mcicrostructure were evaluated with antimonia content. Also two probe A. C conductivity measurement was subjected to all specimens and the best results are achieved with 1mol% $Sb_2O_3$ as a sinter agent and relative density of~98% obtained at 140$0^{\circ}C$ and this composition has a maximum electrical conductivity due to the possible substition of $Sb^{3+}$ for $Zr^{4+}$ site. The effect of $Sb_2O_3$ on the electrical conductivity of th bulk and the grain boundaries has on investigated using frequency dispersion analysis (5~106 Hz) Antimonia addition has a negative in-fluence on both the bulk and the grain boundary conductivity except for a 1 mon% addition. The additive antimonia has improve a modulus of rupture to 60~MPa due to metastable-tetragonal phase apparence and decrease the hardness with increasing the $Sb_2O_3$ content.