• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.415-421
• /
• 2002

A sulfonated PP-g-styrene ion-exchange hollow fiber membrane was prepared by pre-irradiation method with E-beam followed by sulfonation reaction. Degree of grafting increased with the increase of styrene monomer concentration and showed the maximum value of 128% at 80% of styrene monomer composition. Sulfonation yield increased with the degree of grafting. At 100% degree of grafting, sulfonation yield showed the maximum value of 13.4%. Ion exchange capacity of sulfonated HPP-g-styrene of 3.42 meq/g was attained, resulting in the remarkable increase of adsorption ability BET analysis proved that the surface area of sulfonated HPP-g-styrene was 62.54 $m^2/g$ and the mean pore size was 25 $\AA$. From the BSA adsorption experiments, the adsorption amount of BSA was increased with sulfonation. At 13.4% sulfonation yield the adsorption amount of BSA was maximum as 3.8 mg/g. Sulfonated HPP-g-styrene was synthesized successfully and suitable for the adsorption and separation of BSA.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.625-633
• /
• 2013

A type of polycyclotriphosphazene derivative (PCTPD), hexasulfanilic acid polycyclotriphosphazene (HSACP) and HSACP grafting SPEEK, sulfonated poly[2-(petachloropolycyclotriphosphazene-oxy)] etheretherketone (SPPSACPEEK) were synthesized, which were characterized by FTIR and $^{31}P$ NMR. Then three types of composite membranes such as HSACP grafting SPEEK, HSACP blending SPEEK, and nano $Y_2O_3$ doping and HSACP grafting SPEEK, respectively, were continuously prepared by solution-casting method. Comparing to SPEEK membranes with different amount of HSACP grafted or blended, grafting 15 wt% HSACP and doping 10 wt% nano $Y_2O_3$ SPEEK membrane conducted outstanding overall behavior of proton conductivity reaching $3.18 {\times}10^{-2}$ S/cm at $90^{\circ}C$ which was merely junior to SPEEK with 15 wt% HSACP grafted, methanol permeability coefficient getting $9.46{\times}10^{-8}cm^2{\cdot}s^{-1}$, swelling degree of 20.9% and solid residue of 98.98% which was superior to all specimen.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.954-959
• /
• 1999

Radiation-induced grafting of 2-hydroxyethyl methacrylate(HEMA), acrylic acid(AAc) and methacrylic acid(MAAc) onto polypropylene microfiltration membrane has been studied. The effect of grafting conditions such as solvent composition(MeOH and $H_2O$) and monomer concentration on the grafting yield in investigated. The highest degree of grafting is obtained at a solvent composition of 25% $H_2O$:75% MeOH for HEMA, pure water for AAc and 50% $H_2O$:50% MeOH for MAAc. Modification of the PP membranes with hydrophilic monomers is shown to cause an increase in the water permeation flux of the membranes. It is found that HEMA is the best monomer to increase the water permeation flux and the highest water permeation flux is obtained at 99% degree of grafting. The water permeation flux of AAc-grafted PP membrane and MAAc-grafted PP membrane is very sensitive to environmental pH and $Cu^{2+}$ ion, but the water permeation flux of HEMA-grafted PP membrane scarcely depends on pH and $Cu^{2+}$ ion.

• Journal of Chest Surgery
• /
• v.24 no.9
• /
• pp.881-889
• /
• 1991

The ideal goal of the coronary artery bypass surgery is complete revascularization. To estimate the numerical degree of completeness of revascularization, the following formula was used in 50 patients having aorta-coronary bypass grafting for the treatment of unstable angina. myocardial perfusion score of revascularized area Degree of Completeness = ----------------------------------------------------------------------------- x100[%] preoperative myocardial perfusion score Randomized patients who underwent revascularization procedures in 19Hb were compared with the patients who received similar elective operation each year from 1988 through 1991. To obtain these data, the patients aged 38 ~ 75[mean 54$\pm$9.1years], composed of 31 males and 19 females were randomly sampled. The number of grafts per patient increased from 2.30 in 1986, to 3.07 in 1988 - 89, to 3.21 in 1990, and to 3.50 in 1991. [0.05 The degree of completeness improved from 75.4% to 81.4%, 91.6% and 88.6% respectively. It improved significantly in the last two years, [P<0.05, Mann-Whitney U test] At a follow-up of three months, 90 percent[45/50] of patients remained angina, free, 6 percent[3/50] had residual angina, and 4 percent[2/50] died. The last two patients degree of completeness corresponded to 43% and 30% respectively As a conclusion, the degree of completeness seems to improve year by year, and to have close relationship with the clinical results.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.46-52
• /
• 2001

To evaluate the non-ionic polymer, poly(ethylene glycol) (PEG), as a component in cationic copolymers for non-viral gene delivery systems, PEG was coupled to polyethylenimine (PEI). We present the effects of different degrees and shapes of pegylation of PEI on cytotoxicity, water solubility and transfection efficiency. This work reports the synthesis and characterization of a series of cationic copolymers on the basis of the conjugates of PEI with PEG. The modified molecules were significantly less toxic than the original polymer. Moreover, the chemical modification led to enhancement of their solubility. The comparison of pegylated PEIs with different degrees of derivation showed that all the polymers tested reached comparable levels of transgene expression to that of native PEI. As assessed by agarose gel electrophoresis, even highly substituted PEI derivatives were still able to form polyionic complexes with DNA. However, aside from an increase in solubility and retention of the ability to condense DNA, methoxy-PEG-modified PEIs resulted in a significant decrease in the transfection activity of the DNA complexes. In fact, the efficiency of the copolymer was compromised even at a low degree of modification suggesting that the PEG action resulting from its shape is important for efficient gene transfer. The mode of PEG grafting and the degree of modification influenced the transfection efficiency of PEI.

• Journal of Radiation Industry
• /
• v.6 no.4
• /
• pp.317-322
• /
• 2012

In this study, the preparation of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted surface was performed using an eco-friendly and biocompatible ion beam-induced surface graft polymerization. The surface of a perfluoroalkoxy (PFA) film was activated by ion implantation and N-isopropylacrylamide (NIPAAm) was then graft polymerized selectively onto the activated regions of the PFA surfaces. Based on the results of the peroxide concentration and grafting degree measurements, the amount of the peroxide groups formed on the implanted surface was dependant on the fluence, which affected the grafting degree. The results of the FT-IR-ATR, XPS, and SEM confirmed that the NIPAAm was successfully grafted onto the implanted PFA. Moreover, the contact angle measurement at different temperatures revealed that the surface of the PNIPAAm-grafted PFA film was temperature-responsive.

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.52-56
• /
• 2007

A proton exchange membrane was prepared by ${\gamma}-irradiation-induced$ grafting of styrene into poly(tetrafluoro-ethylene-co-perfluoropropyl vinyl ether) (PFA) and subsequent sulfonation reaction. The degree of grafting (DOG) increased with an increase in the absorbed dose. The prepared membranes showed high ion exchange capacity reaching 3.0 meq/g, which exceeded the performance of commercially available perfluorosulfonic acid membranes such as Nafion. The proton conductivity of PFA-g-PSSA membrane increased with the DOG and reached 0.17 S/cm for the highest sample at room temperature. The DMFC performance of the prepared membranes with 50% DOG was comparable to that of Nafion membrane.

• Journal of Radiation Industry
• /
• v.8 no.1
• /
• pp.49-52
• /
• 2014

Kenaf fibers have excellent properties and possess the potential to be outstanding reinforcing fillers in cement. The grafting of poly(ethylene glycol) methacrylate (PEGMA) to the kenaf fibers is important in improving the compatibility between the fibers and the cement. PEGMA was grafted onto kenaf fibers using gamma-ray radiation. The radiation dose ranged from 20 to 60 kGy, and the dose rate was $10kGy\;h^{-1}$. The degree of grafting increased with increased radiation doses. FT-IR analysis revealed an increase in PEGMA content after gamma-ray radiation induced grafting, further evincing the attachment of PEGMA to the kenaf fibers. The mechanical properties of the gamma-ray grafted kenaf fiber/cement composites were superior to those of the ungrafted kenaf fiber/cement specimens.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.478-487
• /
• 2023

Background The outcome of alveolar grafting with synthetic bone substitute (Osteon III) in various bone defect volumes is highlighted. Methods A prospective study was accomplished on 55 patients (6-13 years of age) with unilateral alveolar bone cleft. Osteon III, consisting of hydroxyapatite and tricalcium phosphate, is used to reconstruct the defect. Alveolus defect diameter was calculated before surgery (V1), after 3 months (V2), and finally after 6 months (V3) postsurgery. In the t-test, a significant difference and correlation between V1, V2, and V3 are stated. A p-value of 0.01 is considered a significant difference between parameters. Results The degree of cleft is divided into three categories: small (9 cases), medium (20 patients), and large (26 cases).The bone volume of the clefted site is divided into three steps: volume 1: (mean 18.1091 mm³); step 2: after 3 months, volume 2 resembles the amount of unhealed defect (mean 0.5109 mm³); and the final bone volume assessment is made after 6 months (22.5455 mm³). Both show statistically significant differences in bone volume formation. Conclusion An alloplastic bone substitute can also be used as a graft material because of its unlimited bone retrieval. Osteon III can be used to reconstruct the alveolar cleft smoothly and effectively.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2007

In this study, the sulfonated ion exchange fiber was synthesized by $Co^{60}\;{\gamma}-ray$ radiation-induced graft copolymerization. Degree of grafting (DG) increased with increasing the total dose and showed the highest value at 50 v/v% styrene monomer. And also, the degree of sulfonation (DS) increased with increasing the DG and reaction temperature. DS showed the maximum value at 20 min. Ion exchange capacity and swelling ratio of ion exchange fibers increased with increasing the DS and their maximum values were 4.76 meq/g and 23.5%, respectively. Ammonia adsorption increased as increasing the ammonia concentration and ion exchange capacity and remained constant over 10 cycles.