• 지질공학
• /
• 제17권4호
• /
• pp.643-653
• /
• 2007

수락산 터널지역 내 8개 시추공에서 조사된 기반암의 평균 수리전도도 $2.64{\times}10^{-8}m/sec$, 평균 RQD 78%, 평균공극율 0.51% 및 지하수위는 $77.06{\sim}125.97m$의 범위이었다. 지하수위와 표고간의 회귀분석 결과를 이용하여 수락산 터널 지역 내 두 개의 정상부에서 지하수위를 추정하여 구한 터널 구간의 평균적인 수평수리경사는 0.267 이었다. 수락산 터널 구간에서 현장투수시험에 의해 구해진 최소 수리전도도는 $5.56{\times}10^{-9}m/sec$, 최대 수리전도도는 $6.12{\times}10^{-8}m/sec$, 평균 수리전도도는 $2.64{\times}10^{-8}m/sec$ 이었다. 최소, 최대 및 평균 수리전도도와 평균적인 수평수리경사를 이용하여 산정된 수락산 터널 구간 내에서의 단위 길이 당 지하수 유출량은 각각 $0.00585m^2/day,\;0.06434m^2/day$ 및 $0.02775m^2/day$ 이었다. 물수지분석에 의한 연구지역 내 단위함양유역 당 순수지하수함양율은 224mm/yr로 산정되었다. 터널굴착이 완료된 후 최소, 최대 및 평균 수리전도도를 적용한 지하수위 변동예측 모사에 의하면 수리전도도가 낮을수록 터널 내로의 유출량은 적었지만, 지하수위 강하량은 크게 나타났다. 그리고, 최대 수리전도도를 적용한 모사 시에는 터널로의 유출량이 크지만, 대수층으로의 충진이 빠르게 발생하여 지하수위가 짧은 시간에 회복되었다.

• Geomechanics and Engineering
• /
• 제31권3호
• /
• pp.237-248
• /
• 2022

Nowadays, more and more subway tunnels were planed and constructed underneath the ground of urban cities to relieve the congested traffic. Potential damage may occur in existing tunnel if the new tunnel is constructed too close. So far, previous studies mainly focused on the tunnel-tunnel interactions with circular shape. The difference between circular and horseshoe shaped tunnel in terms of deformation mechanism is not fully investigated. In this study, three-dimensional numerical parametric studies were carried out to explore the effect of different tunnel shapes on the complicated tunnel-tunnel interaction problem. Parameters considered include volume loss, tunnel stiffness and relative density. It is found that the value of volume loss play the most important role in the multi-tunnel interactions. For a typical condition in this study, the maximum invert settlement and gradient along longitudinal direction of horseshoe shaped tunnel was 50% and 96% larger than those in circular case, respectively. This is because of the larger vertical soil displacement underneath existing tunnel. Due to the discontinuous hoop axial stress in horseshoe shaped tunnel, significant shear stress was mobilized around the axillary angles. This resulted in substantial bending moment at the bottom plate and side walls of horseshoe shaped tunnel. Consequently, vertical elongation and horizontal compression in circular existing tunnel were 45% and 33% smaller than those in horseshoe case (at monitored section X/D = 0), which in latter case was mainly attributed to the bending induced deflection. The radial deformation stiffness of circular tunnel is more sensitive to the Young's modulus compared with horseshoe shaped tunnel. This is because of that circular tunnel resisted the radial deformation mainly by its hoop axial stress while horseshoe shaped tunnel do so mainly by its flexural rigidity. In addition, the reduction of soil stiffness beneath the circular tunnel was larger than that in horseshoe shaped tunnel at each level of relative density, indicating that large portion of tunneling effect were undertaken by the ground itself in circular tunnel case.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.596-603
• /
• 1998

The entry compression wave, which is generated at the entrance of the tunnel, is almost always associated with the pressure transients in the tunnel as well as the impulse noise at the exit of the tunnel. It is highly required to design the train nose shape that can minimize such undesirable phenomena. The objective of the current work is to investigate the effects of the train nose shape on the entry compression wave. Numerical computations were applied to one-dimensional unsteady compressible flow in high-speed railway train/tunnel systems. A various shape of train noses were tested for a wide range of train speeds. The results showed that the strength of the entry compression wave is not influenced by the train nose shape, but the time variation of pressure in the entry compression wavefront is strongly related to the train nose shape. The current method of the characteristics was able to represent a desirable nose shape for various train speeds. Optimum nose shape was found to considerably reduce the maximum pressure gradient of the entry compression wave.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.58-68
• /
• 1999

The entry compression wave, which forms at the entrance of a high-speed railway tunnel, is closely related to the pressure transients in the train/tunnel systems as well as an impulsive noise appearing at the exit of the tunnel. In order to alleviate such undesirable phenomena, some control strategies have been applied to the compression wave propagating inside the tunnel. The objective of the current work is to investigate the effect of tunnel entrance hoods on the entry compression wave at the vicinity of the tunnel entrance. Three types of entrance hoods were tested by the numerical method using the characteristics of method for a wide range of train speeds. The results show that the maximum pressure gradient of compression wave can be considerably reduced by the tunnel entrance hood. Optimum hood shape necessary to reduce the pressure transients and impulsive noise was found to be of an abrupt type hood with its cross-sectional area 2.5 times the tunnel area. It is believed that the current results are highly useful in predicting the effects of entrance hoods and in choosing the shape of proper hood.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.234-242
• /
• 1999

Flow phenomena such as the pressure transients Inside a high-speed railway tunnel and the Impulsive waves at the exit of the tunnel are closely associated with the characteristics of the entry compression wave, which is generated by a train entering the tunnel. Tunnel entrance hood may be an effective means for alleviating the Impulsive waves and pressure transients. The objective of the current work is to explore the effects of the train nose shape and the entrance hood on the characteristics of the entry compression wave. Numerical calculations using the method of characteristics were applied to one-dimensional, unsteady, compressible flow field with respect to high-speed railway/tunnel systems. Two types of the entrance hoods and various train nose shapes were employed to reveal their influences on the entry compression wave for a wide range of train speeds. The results showed that the entry compression wave length increases as the train nose becomes longer and the train speed becomes lower. The entry compression wave length in the tunnel with hood becomes longer than that of no hood. Maximum pressure gradient in the compression wavefront reduces by the entrance hood. The results of the current work provide useful data for the design of tunnel entrance hood.

• 한국가시화정보학회지
• /
• 제16권3호
• /
• pp.8-15
• /
• 2018

Recently, as the high speed railway becomes more common, new environmental problems such as noise around tunnels are appearing. When a high speed train enters a tunnel, a compression wave in the tunnel is generated and propagated toward the tunnel exit at a sonic speed. When it reaches the tunnel exit, a part of compression wave radiates as a pulse typed impulse wave to the outside of tunnel. The impulse wave has an explosive noise. When the impulse wave is propagated around a village, it induces a serious noise or other problems to the resident. In order to solve these engineering problems, it is important to investigate the radiation characteristics of the impulse wave radiated from the tunnel exit. In this study, the effect of the length and angle of the baffle plate at the tunnel exit on the impulse wave radiated from the tunnel exit was investigated by numerical analysis. As a results, the baffle plate greatly affected the propagation of impulse wave.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2686-2697
• /
• 1994

When a railway train enters a tunnel at high speed, a compression wave is formed in front of the train and propagates along the tunnel. The compression wave subsequently emerges from the exit of the tunnel, which causes an impulsive noise. In order to estimate the magnitudes of the noises and to effectively minimize them, the characteristics of the compression wave propagating in a tunnel must be understood. In the present paper, the experimental and analytical investigations on the attenuation and distortion of the propagating compression waves were carried out using a model tunnel. This facility is a kind of open-ended shock tube with a fast-opening gate valve instead of a general diaphragm. One-dimensional flow model employed in the present study could appropriately predict the strength of the compression wave, Mach number and flow velocity induced by the compression wave. The experimental results show that the strength of a compression wave decreases with the distance from the tunnel entrance. The decreasing rate of the wave strength and pressure gradient in the wave is strongly dependent on the strength of the initial compression wave at the tunnel entrance.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.351-364
• /
• 2020

This paper numerically investigates the effects of a dip-slip fault (a normal or a reverse fault) movement on a segmental tunnel which transversely crosses either of this kind of faults. After calibration of the numerical model with results from literature of centrifuge physical tests, a parametric study is conducted to evaluate the effects of various parameters such as the granular soil properties, the fault dip angle, the segments thickness, and their connections stiffnesses on the tunnel performance. The results are presented and discussed in terms of the ground surface and tunnel displacements along the longitudinal axis for each case of faulting. The gradient of displacements and deformations of the tunnel cross section are also analyzed. It is shown that when the fault dip angle becomes greater, the tunnel and ground surface displacements are smaller, in the case of reverse faulting. For this type of fault offset, increasing the tunnel buried depth causes tunnel displacements as well as ground surface settlements to enhance which should be considered in the design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.841-846
• /
• 2000

The compression wave produced when a high-speed train enters a tunnel propagates along the tunnel ahead of the train. The micro pressure wave related to He compression wave is a special physics Phenomena created by high-speed train-tunnel interfaces. On this work, the method for reducing the micro pressure wave is to delay the gradient of the compression wave by using aerodynamic structures. The objective of this paper is to determine the optimum angle of the slanted portal using the moving model rig. According to the results of the present study, the maximum value of micro pressure wave is reduced by 19.2% fer the $45^{\circ}$ slanted portal installed at the entrance of the tunnel and reduced by 41.9% far the $45^{\circ}$ slanted portals at the entrance and exit of the tunnel. Also it is reduced by 34.6% for the $30^{\circ}$ slanted portals installed at the entrance and exit of the tunnel.

• 한국터널지하공간학회 논문집
• /
• 제8권4호
• /
• pp.325-334
• /
• 2006

시계조절이나 설해방지 목적으로 설치되는 캐노피 구간 내에서의 기류유동특성의 이해는 정상환기 뿐만 아니라 비상시 대처방안 강구를 위한 요건이다. 또한 터널 방재시스템 설계를 위하여서는 종단구배, 평면선형, 단면크기 및 형태 등과 같은 터널의 다양한 특성이 화재확산에 미치는 영향에 대한 정량적인 이해가 필요하다. 본 연구에서는 국내도로터널의 전형적인 특성을 적용한 터널에 캐노피가 된 경우와 종단 및 선형구배, 단면적 및 형태, 곡선구간이 환기 및 화재확산에 미치는 영향을 CFD분석함을 목적으로 하였다. 분석결과 145m길이의 캐노피인 경우 50%정도의 개구율이 기류유동 패턴 및 환기효과면에서 가장 바람직하였다. 1.8km 터널내에서 20MW 화재발생시 종단구배는 풍속분포와 화재연 확산에 큰 영향을 미치며 제트팬$({\varnothing}1250)$ 4대를 가동한 경우 화재발생 후 5분 경과시 하류 40m지점 부근에서의 화재연 농도는 +2% 구배에서는 13% 감소, -2% 구배의 경우에는 20%정도 증가하며 또한 backlayering거리가 45m정도에 달한다. 직사각형 단면터널의 경우, 화재연 농도 및 풍속분포는 말굽형 터널과 비교하여 현저한 차이가 관찰되지 않는다. 3차선 터널에서는 이들 변수는 모두 감소하며 100초 경과시 50m 정도의 backlayering을 보이며 이후 서서히 감소한다. 곡선터널인 경우는 화재연의 확산이 느리며 100초 경과시 50m에 달하던 backlayering현상은 급격히 사라진다.