• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.877-882
• /
• 1990

Effects of metallic Al powder addition on basic and thermal properties of castable refractories were investigated. Generally, low grade prooperties were obtained by metallic Al powder addition with the increase of temperature, comparing with those of non-addition of Al powder. Especially, Al addtion showed severe shrinkage, corrosiion and low strength above 1000$^{\circ}C$. As a result of Al addition, lower strength of and higher corrosion resistance were shown for 2% addition, but it was reversed for above 4% addition. It was found that Al addition was excellent in the explosive spalling test regardless of Al quantity.

• Elastomers and Composites
• /
• v.27 no.2
• /
• pp.89-101
• /
• 1992

This paper is concerned with analysis for market trend and technological tendency of rubber-use black among United state, Japan and Korea, Through this comparative analysis, the subjects with which domestic carbon black industry is confronted are : first, development of new grade carbon black such as high performance carbon black, Low rolling resistance carbon black and lower grit carbon black, Second, reduction of quality fluctuation, third, improvement of applied technology and fourth, strengthening the price competitiveness through process optimization and productivity increase.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.2
• /
• pp.66-69
• /
• 2009

To manufacture YBCO-coated conductors as superconducting fault current limiters, it is important to conduct researches on their durability. To test their durability, it is necessary to investigate their properties before and after the quench in more severe conditions than in general operating conditions. In this study, their voltage-current and resistance properties were measured before and after a fault current was repetitively applied to them. For the applied voltage, the voltage grades of the YBCO coated conductors were considered. The current amplitude was controlled using protective resistance on an experimental track, and the time and number of applications were fixed to produce the quench occurrence at the fault angles of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$. The operating conditions of the YBCO coated conductors as the main components of superconducting fault current limiters were determined using their voltage properties. The voltage properties of the YBCO coated conductors that were analyzed in this research will be used as important data for their practical application to superconducting fault current limiters.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.376-380
• /
• 2017

In this paper, we prepared a metal alloy resistor with stable thermal electro motive force (thermal EMF) as well as a low temperature coefficient of resistance (TCR) by adjusting the manganese proportion from 3 to 12 wt% in the Cu-Mn-Ni alloy. Composition of the fabricated metal alloy was investigated using energy dispersive X-ray (EDX) analysis. The TCR of each sample was measured as 44.56, 40.54, 35.60, and 31.56 ppm for Cu-3Mn-2Ni, Cu-5Mn-2Ni, Cu-10Mn-2Ni, and Cu-12Mn-2Ni, respectively. All the resistor samples were available for the F grade (${\pm}1%$ of the allowable error of resistance) high-precision resistor. All the samples satisfied the baseline of high thermal EMF (under 3 mV at $60^{\circ}C$); however, Cu-3Mn-2Ni and Cu-5Mn-2Ni satisfied the baseline of low thermal EMF (under 0.3 mV at $25^{\circ}C$). We were thus able to design and fabricate the metal alloy resistor of Cu-3Mn-2Ni and Cu-5Mn-2Ni to have low TCR and stable thermal EMF at the same time.

• Journal of Welding and Joining
• /
• v.8 no.2
• /
• pp.40-52
• /
• 1990

Fatigue behavior of the AH, DH and EH grade TMCP(Thermo-Mechanical Control Process) steels was studied. High cycle and low cycle fatigue tests were carried out for the weldment and base metal of each steel. The results showed that the fatigue limit at 2 * $10^6$ cycles was 33 to 37 kg/$mm^2$ for the base metal and 30 to 34 kg/$mm^2$ for the weldment. The ratio of fatigue limit to tensile strength for TMCP steels was 0.65 to 0.71, which was a value close to the upper limit for the ordinary steels. It was also found that the high cycle fatigue behavior of TMCP steels could be affected by the microstructures of base metal. It will be necessary to have fine structure for TMCP steels to increase the fatigue resistance. In low cycle fatigue test, the fatigue lifetime of AH and DH steels accorded well with the ASME best fit curve, while that of EH steel was considerably lower than the fatigue lifetime of the other steels. Fatigue resistance of the weldment made by high heat input(180kJ/cm) welding was not lower than that made by low heat input(80kJ/cm) welding in case of high cycle fatigue, but the high heat input welding decreased the fatigue resistance in case of low cycle fatigue.

• Carbon letters
• /
• v.7 no.1
• /
• pp.19-26
• /
• 2006

Three point bending tests of single edge notched beam (SENB) specimens were carried out to evaluate the fracture behavior of the fine-grain isotropic nuclear grade graphite, IG-11. To measure the crack initiation point and the subsequent crack growth, the direct current potential drop (DCPD) method and a traveling microscope were used. The effects of test variables like initial crack length, specimen thickness, notch type and loading rate on the measured fracture toughness, $K_Q$, were investigated. Based on the test results, the ranges of the test variables to measure the reliable fracture toughness value were proposed. During the crack growth, the rising R-curve behavior was observed in IG-11 graphite when the superficial crack length measured on the specimen surface was used. The increase of crack growth resistance was discussed in terms of crack bridging, crack meandering, crack branching, microcracking and crack deflection, which increase the surface energy and friction force.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.1-8
• /
• 2007

The DC characteristics of GaAs Gunn diode are investigated as a preliminary study on the planar grade gap injector GaAs Gunn diode which is the transferred electron device with high output power and dc-rf conversion efficiency. The Gunn devices we fabricated were confirmed to have the DC characteristics of negative differential resistance(NDR). We discussed the nature of the NDR effect, including the electron intervalley transfer; the NDR effect was examined for six different cathode radii.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.4
• /
• pp.193-206
• /
• 1994

A wear behavior of electroless (Ni-P-X, X: SiC, $Al_2O_3$, Diamond) composite coating layers, formed under various conditions on commerical grade low carbon steel, has been investigated using Taber abrasion tester and scanning electron microscope. Several factors, which are type of particles, co-deposited content, particle size, distribution of particles and heat-treatment, influenced the wear resistance. The wear resistance of the composited coating layers after heat-treatment at $400^{\circ}C$ for 1 hr was increased 70 times with diamond, 15 times with SiC and 8 times with $Al_2O_3$, compared with the electroless nickel plating layer without heat-treatment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1643-1649
• /
• 2015

Background: The aim of the present study was to evaluate clinicopathological characteristics of our early stage breast cancer patients who are epidermal growth factor receptor 2 (HER2) overexpressed/amplified (HER2+), the efficacy of trastuzumab treatment and survival results. Materials and Methods: Patients with HER2-positive early stage breast cancer receiving adjuvant trastuzumab were investigated retrospectively. Clinicopathological features of 210 patients and treatment outcome were analysed. To evaluate survival rates, the Kaplan-Meier method was used. Univariate and multivariate analyses were conducted with the Cox regression model. Results: Mean age of the patients was 51.8, 71.9% being postmenopausal. Some 37.6% of patients were node negative, and 31% had T1 tumor size and 52.4% were positive for estrogen receptor. Of 210 patients, 89.5% completed planned 52 weeks adjuvant trastuzumab treatment. The median follow up was 27.5 months (6.0-86.0). Relapse free survival (RFS) was 68.0 months (95% CI: 62.1-74.0) and overall survival (OS) was 74.8 months (95% CI: 69.5-80.1). The 3 year OS for all patients was 92.0% and RFS was 79.6%. During follow up, relapse was detected at the rate of 14.3%. Trastuzumab associated cardiotoxicity was found at the rate of 3.3%. In univariate analyses, larger tumor size and grade III were significantly associated (p<0.05) with RFS. Multivariate analyses of covariates displaying p<0.05 identified grade III as an independent prognostic factor. Conclusions: In the present study, it was established that trastuzumab had a satisfactory safety profile and treatment efficacy as in other clinical studies and that among clinicopathological factors evaluated, only being grade 3 had a significant effect on RFS. The occurrence of relapse with adjuvant trastuzumab makes it necessary to identify molecular predictors, which will define this group better and help explain resistance to anti HER2 based therapies.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.168-175
• /
• 1990

Softners-BHICS, BBICS, and BTICS were prepared from 1, 2-disubstituted imidazoline compounds, such as 1-behenoylaminoethyl-1-glycidyl-2-heneicosylimidazolinium chloride(BHIC), 1-behenoylbis(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride (BBIC), and 1-behenoyltris(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BTIC), and treated to acrylic fiber. The measurements of softness, lubricating and antistatic properties showed that they have not only good softness and lubricating property but also a little antistatic property. Furthermore, the initial bending resistance for BBICS and BTICS was 5 grade, and remained 3~4 grade after 5 times washing. As results of these tests, they showed good softner effects having durability. The prepared softners were proved to be durable softner through a series of experimental results for washable properties of feeling by varying treating temperature and pH change.