• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.310-311
• /
• 2009

New X-shaped crystalline molecules have been synthesized through various coupling reactions and their electronic properties were investigated. They exhibit good solubility in common organic solvents and good self-film forming properties. They are intrinsically crystalline as they exhibit well-defined X-ray diffraction patterns from uniform and preferred orientations of molecules. They also exhibited high field effect mobilities in thin film transistor (TFT) and good device performances.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1163-1166
• /
• 1993

This paper studies the evaluation of mechanical design plans through fuzzy cluster. Plans are classified into two sets, 'good' and 'bad'. The membership of a plan to the 'good' set is numerically equal to the distance to the 'bad' set. The central parameter of the 'good' set is defined as '1', and that of the 'bad' set '0'. This will greatly simplify calculations. The result of the calculating example proves the method available.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.207-215
• /
• 2001

Plastic bonded explosive(PBX) is mainly composed of the nitramine-ploymer compositions. PBX is characterized by high velocity and pressure of detonation, low vulnerability and good thermal stability. Many important applications of PBX require the good adhesion between nitramine crystals and the binder. For PBXs as well as propellants, where good mechanical properties are of great importance, dewetting therefore must be prevented by strong adhesion between filler-binder. Adhesion depends on surface characteristics of filler and binder. In order to design for better adhesion, an understanding of the surface properties of explosive and binder is required. The surface free energies are calculated from contact angle values by the method of Kaelble. Critical surface tension of solids are calculated by Zisman plot. Critical surface tension is a useful parameter for characterizing the wettability of solid surface. In this study, HMX and 3 kinds of copolymers are selected, since they are widely used in many plastic bonded explosives. The technical objective of this investigation is to predict the interaction between filler and binder from their surface free energies.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.62-70
• /
• 2005

Step-feed process for biological nitrogen removal were analyzed numerically for the each unit and final total nitrogen(TN) effluent by water quality management(WQM) model and the results were compared data from these wastewater treatment plants. No bugs and logic error were occurred during simulation work. All of the simulation results tried to two times were obtained and both results were almost same as this model has become good reappearance. It was concluded that most of nitrogen removal occurred in the first oxic tank. Thus the controlling of the first anoxic tank may be more important in term of nitrogen removal. Also each unit of simulation result was kept good relationship with that of measured data. Accordingly this WQM model has good reliance. Finally, WQM model can predict final TN effluent within ${\pm}6.0mg/{\ell}$.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.105-112
• /
• 1996

This paper presents coal mine waste (CMW) for use in concrete manufacture as a replacement of normal aggregates. The CMW in this study was collected from Sabook, Jungson-kun, Kangwon-do. Fine and coarse asggregates from CMW were prepared by crushing it in a jaw crusher and separating debris with #4 sieve. CMW aggregates showed good physical and mechanical properties with having specific gravity over 2.65, absorption less than 1%, and abration ratio below 20%, but particle shape of CMW was long or flat, which caused a poor workability in mixing. Therefore, to make workability better, a 1/4 of CMW coarse aggregate was replaced with normal aggregate which had a good particle shape, and a superplasticizer was added to the mix. Compressive strength and other mechanical properties of CMW concrete was very good. In conclusion, characteristics of CMW concrete was acceptable for use as a concrete structural material.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.359-366
• /
• 2011

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength($2.10kg_f/mm^2$) and sample d(WAC 93 : WPU 7) had most high strength($3.41kg_f/mm^2$). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.291-304
• /
• 2003

Inventory of differential (both good And defective) items purchased in a lot for two shops under a single management is considered here. In the primary shop, the lot is received and separated, only good units are sold and shortages are allowed which are backlogged from the good units specially purchased at the beginning of the next cycle. The separated defective units are continuously transferred and sold at a reduced price from the secondary shop. This inventory model is formulated and illustrated numerically for three scenarios depending upon the time periods of the shops. Inventory, deterioration, two shops.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.77-82
• /
• 2007

A novel DDoS (Distributed Denial-of-Service) defense technique, Exaustiveness-Based Detection, is proposed in this work. It dispenses with the network congestion and the unfairness between users of the Defense-by-Offense technique by incorporating a kind of simple Detect-and-Block scheme (user identification), still improving the effectiveness of the defense in comparison to the original Defense-by-Offense technique. It uses SYN cookies to identify users in the granularity of ip address and to prevent ip address spoofing by the attacker. There can be, however, some probability of false negative (denying service to good clients), if the attacker wisely adapt to the new technique by saving some portion of its bandwidth resource and later mimicking good clients. Quantitative analysis the requirement for the good clients to be safe from the false negative is provided and a procedure to design the server capacity is explained.

• TTA Journal
• /
• s.88
• /
• pp.141-148
• /
• 2003

TTA(한국정보통신기술협회)는 소프트웨어 품질인증 제품으로 2003년 6월 5일 3개, 7월 10일 4개 제품에 대하여 Good Software 마크를 발급하였다. 그리고 2003년 5월 21일에 VeriTest-TTA 인증으로 1개 제품에 대하여 VeriTest-TTA Good Quality, Optimized Performance & Internationalized를 발급하였다. 본 고에서는 상기한 인증 획득한 제품에 대하여 소개하고자 한다.

• Current Research on Agriculture and Life Sciences
• /
• v.18
• /
• pp.27-31
• /
• 2000

Preferences on the change of color and aroma of soybean sprout was surveyed. Negative response of 'bad' or 'very bad' on pink (72%), red (60%), and green (44%) coloring was obtained. However, yellow coloring showed about 55% of positive response of 'good' or 'very good'. Thus yellow is the only color which received highly positive response among altered-color soybean sprouts. Significantly different result was observed when various aroma was added to soybean sprout. 80% of peanut scent-added soybean sprout and 76% of melon scent-added soybean sprout received positive response of 'good' or 'very good' while only 20% of the response was negative. In conclusion, altering color to yellow and addition of peanut scent or melon scent could increase the general preference of soybean sprout.