• 전기학회논문지P
• /
• 제54권2호
• /
• pp.73-79
• /
• 2005

This paper is proposed hybrid artificial intelligent (HAI) controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed estimation of induction motor using a closed-loop state observer. The rotor position is calculated through the stator flux position and an estimated flux value of rotation reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The results of analysis prove that the proposed control system has strong robustness to rotor parameter variation, and has good steady-state accuracy and transitory response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1036-1038
• /
• 2000

This paper presents an implementation of digital motion control system of induction motor vector drives with a direct torque control(DTC) using the 16bit DSP TMS 320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are stator flux observer of current model that inputs are current sensing of motor terminal and rotor angle, and optimal switching look-up table by using fully integrated control software. The developed system are shown a good motion control response characteristic results and high performance features using 2.2Kw general purposed induction motor.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.270-277
• /
• 2013

Single phase induction motor(SPIM) is used widely because it is driven by single phase source. However, the efficiency of the motor is not good due to saturation of magnetic material. To analyze the motor accurately, the magnetic saturation characteristics should be considered in analysis of equivalent circuit. In this paper, lumped parameter of circuit are derived from multi phase induction motor using method of symmetrical coordinates. Also, we presents a method for the equivalent circuit analysis of SPIM using magnetic saturation rate. The magnetic nonlinearity is considered deriving magnetizing reactance from voltage-current saturation curve. As a results, current characteristic, torque, output and efficiency are shown through analysis of equivalent circuit. A simulation results of SPIM will be used to improve the characteristics and efficiency of motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.872-873
• /
• 2007

This paper proposes a calculating method of resistance and inductance of end ring of squirrel cage induction motor for 2D finite element analysis. The squirrel cage of induction motor consists of bars and end rings. The resistance and inductance of end ring have an effect on the result of the finite element calaculation. If the end ring were excluded from the analysis, the good result could not be obtained. Therefore, we first simulate an axisymmetric magnetodynamic analysis for the end ring, and then calculate the interbar resistance and the end ring inductance. The calculated values are put into the external circuit of 2D finite element model of the induction motor. The proposed method is verified by comparing the numerical results with the experimental ones.

• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.138-147
• /
• 1998

본 논문에서는 구현이 간단하고 강인한 제어특성을 갖는 퍼지제어를 이용하여, 연속적으로 부하와 속도지령이 변하는 전기자동차 구동용 유도전동기가 부하에 무관하게 지령속도를 추종할 수 있는 제어기를 구성하고자 한다. 그리고 유도전동기를 구동하기 위한 PWM(Pulse Width Modulation)파형은 최대출력전압이 높고 디지털구현이 용이한 공간전압벡터 변조법을 이용하여 생성하였다. 제안된 시스템이 빠르고 외란에 강할 뿐만 아니라, 지령 속도에 잘 추종함을 확인할 수 있었다. 따라서 연속적으로 속도지령이 변하고 부하변동을 갖으며, 외란의 영향을 받기 쉬운 전기 자동차의 구동장치에 제안된 퍼지 제어기의 타당성을 입증하였다.

• 한국자원식물학회지
• /
• 제35권6호
• /
• pp.770-777
• /
• 2022

The main objective of this study was to identify the most appropriate condition for root formation of in vitro micropropagated pear (Pyrus spp.) plants. In vitro propagation was induced on Murashige and Skoog (MS) medium with 2.0 mg/L of N6-benzyladenine (BA) and 0.2 mg/L of Indole-3-butyric acid (IBA) medium. The short pre-treatment of explants with a high concentration (1 mg/L) of NAA and IBA (R0 medium) in dark for three days, followed by transfer to five different media (R1 to R5) resulted in good rooting responses in the pear 'Oharabani (P. pyrifolia × P. communis)' genotype. For the rooting experiments, the highest rooting percentage (83.3 ± 8.3%), average root length (3.6 ± 1.9 mm), total root number (31 ± 4.0), and average root number per plant (2.6 ± 2.1) were obtained on half strength (1/2) of MS medium supplemented with 30 g/L sucrose without hormones and activated charcoal (AC) (R1 medium). The highest rooting percentage was obtained at 83.3% from explants on R1 and R3 media. The rooting procedure described in this study resulted in good root formation and significantly shorting the root induction time to within 14 days of culture. Further studies are underway to test the suitability of the protocol developed in this study for other pear genotypes.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제22권1호
• /
• pp.72-79
• /
• 2019

Purpose: The efficacy of exclusive enteral nutrition (EEN) with a polymeric diet has not been confirmed in Korean pediatric patients with Crohn's disease (CD). This study aimed to compare the effectiveness of EEN with a specific polymeric diet ($Encover^{(R)}$) and corticosteroids (CSs) for the induction of remission in Korean pediatric CD patients. Methods: We retrospectively compared data from 51 pediatric CD patients who underwent induction therapy with EEN (n=19) or CSs (n=32) at Severance Children's Hospital or Incheon St. Mary's Hospital in Korea. The primary endpoint of this study was the rate of clinical remission, defined as a Pediatric Crohn's Disease Activity Index (PCDAI) score <10, after 8 weeks of induction treatment. Clinical, laboratory, and growth data at post-induction as well as their changes from baseline were also compared between groups. Results: After 8 weeks of induction therapy, clinical remission rates were 78.9% (15/19) and 65.6% (21/32) in the EEN and CS groups, respectively (p=0.313). No significant differences in PCDAI scores, laboratory variables, and growth parameters were noted between the two groups at post-induction. However, significant changes in albumin levels at post-induction were observed in the EEN group compared to the CS group (p=0.038). Conclusion: Our results suggest that the effectiveness of EEN with a polymeric diet and CSs for induction therapy did not differ in Korean pediatric CD patients. EEN with a polymeric diet is a good first-line treatment option for the induction of remission in these patients.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.137-139
• /
• 1991

This paper proposes a minimum power factor control for maximum efficiency operation of an induction motor, under low load condition. Minimum input or maximum efficiency operation is achived by properly adjusting the amplitude of the stator voltage, with the three phase AC voltage controller. Through the simulation, the relationships between the delay angle and input power under various load conditions are examined. Experimental results are also given, which show good coincidence with the simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2129-2131
• /
• 1997

A sensorless controller of induction motor has several advantage: availability in a harsh environment. In this paper, the speed information is driving from the currents and the estimated stator flux. To obtain the estimated stator flux, this study is using The Estimator. The simulation results show that the proposed scheme has activity over a wide speed range and good response to load variations

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.211-214
• /
• 2000

The conventional PI controller has been widely used in industrial application due to the simple control algorithm. But it is very difficult to find the optimal PI control gain. Therefore in this paper to obtain optimal performance fuzzy proportional-plus-integral controller for the vector control system of an induction machine is presented. The simulation model is created in MATLAB/SIMULINK. The simulation results demonstrate the good performance of this system.