• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.89-99
• /
• 1993

In this research, important mechanical characteristics of Compliant Press-Fit Pin and PHT are studied through the analysis of deformation mechanisms of Press-Fit Pin and by elastic-plastic finite element method. The direct data for the optimal design of pin was obtained without interfere with the criterion on insertion force and retention force. Also, the insertion force and retention force of new type pin were measured by precision type tensile testing machine and it revealed good agreement with analytical results. In conclusion, it is believed that above results will contribute satisfactorily to the practical design of Press-Fit Pin.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• The Korean Journal of Community Living Science
• /
• v.24 no.1
• /
• pp.85-97
• /
• 2013

The purpose of this study was to develop an appropriate jacket pattern for obese women in 20s and 30s, providing a good fit and appearance. The results were as follows: among 3 kinds of patterns collected in order to develop a jacket pattern to fit the average body of an obese woman in 20s and 30s, a business-type pattern(which was comparatively evaluated as a good fit) was worn and revised so as to design a final research pattern with proper fitness and a good shape. The biggest problem of the existing pattern was may overall spares, especially many spares of bust size, waist measurement, hip circumference, all of which makes a bad appearance. Considering the results of a survey which indicates that young obese women like tight-fitting clothes, bust size was decreased from 8 cm to 6 cm, and their waist measurements were bigger compared to other age groups, so a total of 1.1 cm(with 0.3 cm in the front, back side, and 0.5 cm in the back waist) was decreased. The hip circumference was decreased by 2 cm from H/2+4 to H/2+2 cm, the quantity of front deflection was established as 1.5 cm in order to compensate for the coming off of the front side caused by the fat on the stomach.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.766-775
• /
• 2014

This study is aimed to research the actual wearing condition of ballet dancewear of girls aged between 2 and 6 years on its design, size and fit. Survey data were collected from 171 mothers who have a girl learning ballet dance. The questionnaire was composed with ballet education, ballet dancewear purchasing, preference on design, size selection, and fitting. The collected data were analyzed with frequencies statistics, ${\chi}^2$-test, ANOVA using the SPSS WIN 20.0. The results are as follows; High rate of respondents said that the purpose of ballet education was for good body balance, leisure activity, and height growth. The main method of purchase was online shopping. The design, price, size and fit were identified as important ballet dancewear attributes for girls. The most preferred style of ballet dancewear were 'short sleeve skirted leotard' and 'camisole skirted leotard' which look like dress. The respondents reported slight satisfaction with size and fit, price, convenience in action, sewing and durability. The most preferred sizing system was code by height but any ballet dancewear makers don't use code by height. Therefore it is difficult for consumers to select size. Retailers and manufacturers could potentially use the results of this study to improve the sizing system and fit for children's ballet dancewear.

• Journal of Korean Academy of Nursing
• /
• v.35 no.2
• /
• pp.239-251
• /
• 2005

Purpose: This study was designed to construct a structural model for explaining mental health status in middle - aged women. Methods: The data was collected by self - reported questionnaires from 206 middle - aged women in Seoul. Data analysis was done with the SAS pc program for descriptive statistics and a PC - LISREL Program for finding the best fit model which assumes causal relationships among variables. Results: The overall fit of the hypothetical model to the data was good, but paths and variables of the model were modified by considering theoretical implications and statistical significances of parameter estimates. Thus it was modified by excluding 3 paths, The modified model showed was good fit to the data($x^2=177.55$, p=.00), GFI=0.908, AGFI=0.860, RMR=0.013, NFI=0.972, NNFI=0.982). Perceived stress, anger expression method, and self -esteem were found to have direct effects on mental health status in middle - aged women. These predictive variables of mental health status explained $66.6\%$ of the model. Conclusion: Programs to enhance mental health status in middle - aged women should include stress management skill, anger expression skill, and self -esteem enhancement skills to be effective.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.192-209
• /
• 2004

Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combination or internal connection type. Material and methods: In this study, each two randomly selected internal implant fixtures from ITI, 3i, Avana, Bicon, Friadent, Astra, and Paragon system were used. Each abutment was connected to the implant with 32Ncm torque value using a digital torque controller or tapping. All samples were cross-sectioned with grinder-polisher unit (Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc). Then optical microscopic and scanning electron microscopic(SEM) evaluations of the implant-abutment interfaces were conducted to assess quality of fit between the mating components. Results : 1) Generally, the geometry of the internal connection system provided for a precision fit of the implant/abutment into interface. 2) The most precision fit of the implant/abutment interface was provided in the case of Bicon System which has not screw. 3) The fit of the implant/abutment interface was usually good in the case of ITI, 3I and Avana system and the amount of fit of the implant/abutment interface was similar to each other. 4) The fit of the implant/abutment interface was usually good in the case of Friadent, Astra and Paragon system. The case of Astra system with the inclined contacting surface had the most Intimate contact among them. 5) Amount of intimate contact in the abutment screw thread to the mating fixture was larger in assembly with two-piece type which is separated screw from abutment such as Friadent, Astra and Paragon system than in that with one-piece type which is not seperated screw from abutment such as ITI, 3I and Avana system. 6) Amount of contact in the screw and the screw seat of abutment was larger in assembly of Friadent system than in asembly of Astra system of Paragon system. Conclusion: Although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal implant-abutment connections which provides intimate contact with the implant walls to resist micro-movement, resulting in a strong stable interface. From the results of this study, further research of the stress distribution according to the design of internal connection system will be required.

• Communications for Statistical Applications and Methods
• /
• v.5 no.3
• /
• pp.935-944
• /
• 1998

This paper investigates the problem of goodness of fit tests for no effect model. The proposed test statistic $Z_{mn}$ is obtained by multiplying constant on the model free curve estimation techniques. The small and large sample properties of$Z_{mn}$ are investigated and the good results of power studies for the proposed test are illustrated.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.623-632
• /
• 2007

Some tests of the goodness of fit of the uniform distribution between 0 and 1 are presented. The powers of the tests under certain alternatives are examined. As a result, the statistic based on the difference between the order statistics and the modal value of them gives good powers. We also give modifications of the statistic without using the extensive tables of the critical points.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.65-72
• /
• 2000

The study investigated the effects of base curve radius art the fit of thin, mid-water contact lenses. It was found that central corneal curvature(as measured with the keratometer) was not predictive of the best fitting base curve. Proper lens fit may be the single most important factor that ultimately determines the success of contact lens wear. Comfort, vision, and physiological response are all dependent on the fit of the lens. The percent of optimal fits was highest with the 8.4 mm base curve lens for all three ranges of keratometry values. When fit with the 8.4 mm lens. For most eyes, fitting a flatter lens led to greater decentration, decreased comfort, and no increase in lens movement. The 8.4 mm lens was found to provide on "optimal" fit in over 60% of eyes tested and a fit of "good" or "better" in nearly 90% of eyes tested. Comparisons of different manufactures' lens found that similiar lenses do not always fit in the same way due to subtle design and production differences. Therefore, different products may require different base curve radii to fit the same patient. This is even true when water content, center thickness, and diameter are approximately the same. A praditioner fitting a new patient in this lenses should begin with the 8.4 mm base curve radius.

• The Research Journal of the Costume Culture
• /
• v.22 no.6
• /
• pp.911-929
• /
• 2014

This study is designed to analyze the similarity of fit and appearance between 3D virtual torso length sloper with real torso length sloper according to three 3D virtual clothing simulation programs (Optitex, CLO 3D, i-Designer), three body types (A, N, H) and fit status. We selected three representative body type models of females aged 20~30 and got their direct body measurements. Using these body measurements, we developed three 3D avatar body models and made three torso length fitted sloper with long sleeves. Thirty expert fit judges consisting of technical designers and graduate students assessed the similarity of fit and appearance between 3D virtual clothing and real clothing by observing images classified into front, back and side scene. We conducted ANOVA and post-hoc analyses to compare fit and appearance between real clothing and virtual clothing depending on three program. The results showed that CLO 3D represented fit and silhouette most similarly among the programs, especially girths, width and length. i-Designer tended to be relatively good to represent stress fold amount and silhouette. Optitex was assessed relatively better in expressing ease amounts in torso girths and armscye girths, but relatively worse for width, length, stress fold amount and silhouette.