• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.9-18
• /
• 2021

This study was aimed to investigate the effects of hair dyeing and changes of hair quality by the application of indigo dye. Methods: Indigo dye was used after water bath. After application of the dye to healthy and bleached hair samples, they were treated with heat and remained naturally by different times. Each sample was measured before and after the application and compared for the analysis. To investigate the effects of dyeing, L⁎, a⁎, and b⁎ values and bleaching degree were measured using by color-difference meter. To understand the changes of hair quality, absorbance and gloss were measured using by tensile strength and methylene blue. Results: Upon the results of dyeing, all the samples showed the significant dyeing effects before and after the application in terms of L⁎, a⁎, and b⁎ values. With respect to the bleaching effects, it showed the greatest change on Day 1 and did not show any changes from Day 3. For the measurement of tensile strength, mean values of all the samples were increased. However, the results were not significant, statistically, demonstrating no change of hair quality. No statistically significant results were found in the samples except healthy 7L(3) sample upon the absorbance results using methylene blue. Gloss of samples was changed upon the statistical analysis results. Conclusion: Indigo dye showed the hair dyeing effects, significantly, while gloss was changed and tensile strength and absorbance were not changed in terms of hair quality. Further studies are required on the processing with a variety of dyes and on the measurements for reliability and objectivity.

• Journal of Conservation Science
• /
• v.24
• /
• pp.43-56
• /
• 2008

When we consolidate the iron artifacts, only we used VM&P Naphtha as solvent of paraloid NAD10. After consolidating the iron artifacts using paraloid NAD10, artifacts were too glossy to exhibit and see. We choose the solvent YK-VMP as solvent of paraloid NAD10 for complementing this defect and examined characterizations of paraloid NAD10 films in each solvent. As a result of evaluation by several surface analysis such as optical microscope, measuring film thickness, adhesive strength, gloss of surface, contact angle, yellowing test and EIS, it is possible to use YK-VMP instead of VM&P Naphtha as solvent of paraloid NAD10, because YK-VMP lowered surface gloss and did not change the effect of consolidation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.515-532
• /
• 2014

Objective: The purpose of this study is to define consumers' affection on the interior design of commercial cars in terms of its design factors: color, embossing and gloss as independent factors. Background: Existing affective studies related to interior of vehicle focus on just sedans. However, there is no affective study about the interior of commercial cars. In addition, it is hard to change levels to which manufactures want. Method: Representative design factors were drawn using ANOVA and SNK analysis and definitive affective vocabularies were drawn using factor analysis. Furthermore, the results of 3D experiment were analyzed using ANOVA and LSD analysis. 3D images for the experiment were made using 3D max program. The experiment revealed that consumers discerned the differences in levels of each design factor and affective vocabulary. Results: The ANOVA revealed that beige color "A" type and non-gloss were the most preferred design in terms of the affective vocabularies and total preference. Conclusion: The result of the experiment may help manufactures to design the interior of commercial cars in the near future. Furthermore, the ANOVA result of affective vocabularies evaluation is expected to suggest a meaningful guideline. Application: The study results may be utilized as a guideline for interior design of commercial cars.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1289-1297
• /
• 2023

In this study, NF Complex of 0%, 0.5%, 2.5%, 12.5%, and 100% was prepared by complexing and extracting Indian gooseberry, Rosa multiflora Thunberg roots, and saw palmetto fruit in a ratio of 5:1:1. The manufactured NF Complex was applied to bleached sample hair and then compared and analyzed with damaged hair. To confirm the improvement effect, tensile strength, gloss, absorbance, and brightness were measured. As a result of the measurement, the tensile strength increased. The gloss content decreased by 100%, but the remaining content increased. The change in absorbance was minimal. There was also a change in brightness, but it was minimal. It was confirmed that there is a significant difference in the average value of NF Complex, and it is judged necessary to study various ratios in the future.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.149-156
• /
• 2010

One of resins, V-Flon is useful as a coating material because YK-D80, which is a solvent for V-Flon, is not highly volatile. However, it can not completely harden and can flow out when metal artifacts are joined and restored in the process of the treatment. Therefore, after the impregnation process in order to accelerate the hardening speed of a coating material, usually a dry oven was adopted. This study focused on finding the problems on the dry oven which is employed to increase the speed and investigating the most effective solvent and its composition by checking any change occurred depending on the concentration of solvents. Six different types of solvents were selected and samples were prepared in a manner that they were impregnated with solvents in three concentrations respectively (10%, 20%, 30%). To determine the condition of the samples, the stability evaluation was performed by measuring the change of color and the gloss, the thickness of coated layers, the corrosion after coating, the water resistance by contact angles. Through the comparative experiments between the natural drying and the artificial drying using a dry oven, it was found that when the dry oven is used, some problems are identified on the point of forming a uniform and stable layer because of the unstable data collected from the forced artificial dry. The experiments performed using 3 different concentration rates (10%, 20%, 30%) presented that in the case of 10% V-Flon in Xylene (using as a solvent), its layer was thin as well as it showed the high water-barrier property, which allows it to form the stably coated layer with the lower gloss and color change.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.35-37
• /
• 1988

Polycrystalline $Cd_{1-x}Zn_xS$ films were prepared by coaling a slurry which consisted of CdS, ZnS, $CdCl_2$ and propylene glycol on gloss substrates and by sintering in a nitrogen atmosphere. Microstructures, optical transmittance and electrical resistance of the sintered films have been investigatd. Grain shape of $Cd_{1-x}Zn_xS$ films sintered in a sealed boat was nearly spherical but the shape became, irregular when sintered in evaporating condition due to occurrence of CIGM (Chemically Induced Grain-boundary Migration). Controlling the rate of evaporation of $CdCl_2$, sintered $Cd_{1-x}Zn_xS$ films with high optical transmittance and low electrical resistance could be obtained.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.25-43
• /
• 2005

Generally, machine calendering are used change of paper surface properties. During machine calendering, dry paper passes between the rolls under pressure, thereby improving the surface smoothness and gloss. These improvements make the paper better suited for printing and decreasing problems during the printing, such as delayed dry and set-off. Then we investigated newspaper properties by the changing of machine calendering condition, and relationship printability. Properties of each samples were examined in accordance with KS and TAPPI standard test method i.e, basic weight, bulk density, thickness, porosity, opacity, brightness, smoothness and roughness. IGT printability tester was used to obtain ink requirement of newspaper, printed density and set-off. Results of in this study, we have proposed the optimizes range of newspaper calendering condition. Useful optimize calendering condition was pressure 55 kN/m, temperature $130^{\circ}C$.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.501-510
• /
• 2016

In this study, we investigated the degradation of adhesives when exposed to ultraviolet light irradiation using samples of lacquer (L), treated lacquer (TL), lacquer mixed with glue (LG), and urushiol mixed with glue (UG). Four types of film specimens were collected under the ultraviolet exposure time, and gloss test, tensile shear strength test, scanning electron microscope analysis, and infrared spectroscopic analysis were conducted for the specimens. LG and UG showed lowering rate of gloss is somewhat later than L. Also, it was observed that with increasing exposure time to ultraviolet irradiation, the surface of L began to show spherical pits and cracks when the polysaccharide layers started to be exposed, whereas the surfaces of LG and UG remained smooth. The Infrared spectra of L and TL showed that the intensity of the overall peak decreased with increasing ultraviolet irradiation time. There was no change in the peak intensity of LG, but for UG, the peaks at $3013cm^{-1}$, $1593cm^{-1}$ and so on disappeared and the overall intensity declined. The tensile shear strength of LG and UG was maintained or increased as compared to the initial test, whereas the tensile shear strength of L decreased sharply after 600 h. LG and UG exhibited fewer changes as a result of high temperature and humidity conditions, and they retained their strength under UV exposure. These results indicate that LG and UG are more durable than L when subjected to environmental change.

• Economic and Environmental Geology
• /
• v.56 no.5
• /
• pp.581-588
• /
• 2023

This study reports depth-dependent elemental distribution and mineral abundance of the oceanic sediment sample (WP21GPC04) near the Mariana Trench collected during the WP21 expedition in 2021. The elemental distribution determined by μ-XRF shows no significant differences with varying depth, with an average SiO₂ 53.91 wt%, FeO 4.48 wt%, Al₂O₃ 16.56 wt%, MgO 2.56 wt%, CaO 4.79 wt%, Na₂O 3.52 wt%, K₂O 5.48 wt%, similar to the average chemical composition of global subducting sediments (GLOSS). The mineral abundances analyzed using synchrotron XRD, however, vary with depth. While quartz, mica, and plagioclase were identified at all depths, chlorite was found at shallow depths, and zeolite group minerals, phillipsite and heulandite, showed a gradual change in phase fraction with depth. This suggests a change in sedimentation and alteration environments in the region, or the potential for coexistence emerges due to similar sediment stability. Overall, this study will provide a basis for the future investigations on the evolution of sedimentary environment near the Mariana Trench in the western Pacific Ocean and the phase distribution and the behavior of subducting oceanic sediments, which will affect the lithological and geochemical characteristics of the Mariana susduction system.