• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.116-121
• /
• 2002

For the accumulation of a fundamental knowledge about the behavior of glass solder during the joining of ceramics, the wettability of solder on silicon nitride have been measured by sessile drop method. $SiO_2-MgO-Al_2O_3$ g1ass solder and oxynitride glass solders were selected as examples while silicon nitride which were used as substrates. Contact angle of solder on silicon nitride didn't decrease with time at high nitrogen content in the solder, but low nitrogen content in solders have the time-dependent property. Reason which contact angle of low nitrogen content in solders decrease on silicon nitride was that diffusion of nitrogen take place between solder and silicon nitride.

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.606-611
• /
• 1999

Kaolin으로부터 합성한 mullite에 brosilicate계 유리를 혼합하여 기판재료로 적합한 저유전성 Mullite/Glass 복합체를 제조하였다. 유리를 첨가함으로써 액상소결에 의한 Cu, Au, Ag-Pd 등의 배선 사용이 가능한 저온에서 치밀한 소결체를 얻을수 있었다. 기판의 물성저하의 원이 되는 유리의 결정화는 나타나지 않았다. 소결온도 950~$1100^{\circ}C$의 범위에서 유리 50 wt%의 조성의 복합체에서 유전상수 약 5.2~5.4 (at 1 MHz), 열팽창을 5.3~$5.7{\times}10^{-6}{\cdot}^0C^{-1}$, , 꺾임강도 130 MPa로 high-performed substrate로서 적합한 특성을 나타내었다.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.289-292
• /
• 2015

The etching processes of glass in aqueous hydrofluoric acid (HF) solutions were used to improve the current density of solar cell. In this study, the textured glass substrate has been etched by solution and the $TiO_2$ thin films have been prepared on this textured glass. After the $TiO_2$ film deposition the surface has been etched by HF under different concentration and the etched $TiO_2$ thin films had a longer electron lifetime and higher haze ratio as well as light scattering, resulting in 1.7 times increment of dye-sensitized solar-cell(DSSC) efficiency. Increases in the surface root-mean-square roughness of glass substrates from 80 nm to 1774 nm enhanced haze ratio in above 300 nm wavelength. In particular, haze ratio of etched $TiO_2$ films on textured glass showed gradually increasing tendency at 550 nm wavelength by increasing of HF concentration up to 10M, suggesting a formation of crater with various sizes on its surface.

• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.77-82
• /
• 2004

본 연구에서는 고유전율(K100) 및 저유전율(K7.8) LTCC(Low Temperature Co-fired Ceramics) 그린 시트를 이종 LTCC 기판으로 동시 소성하는 경우, 고유전율 LTCC 내의 유리 분말 함유량에 따라 발생하는 수축 거동 변화가 이종 LTCC기판의 휨 특성에 미치는 영향에 대하여 평가하였다. 유리 분말 함유량의 증가에 따른 고유전율 LTCC 그린시트의 수축률 및 유전 특성을 측정하였으며, 고유전율/저유전율 비대칭형 적층체의 소결 거동을 고온 현미경을 이용하여 실시간으로 측정하였다. $50\%$ 유리가 첨가된 K100 조성의 경우 수축 개시 온도 및 수축 구간의 범위 , 최종 수축률이 K7.8 조성과 유사하였으며, 동시 소성 시 가장 우수한 휨 특성을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.247-247
• /
• 2009

In this work, Ga-doped ZnO (GZO) thin films for toxic gas sensor application were deposited on low temperature co-fired ceramic (LTCC) substrates, by RF magnetron sputtering method. LTCC is one of promising materials for integration with heater, low cost production and high manufacturing yields than silicon substrate. The LTCC substrates with thickness of $400\;{\mu}m$ were fabricated by laminating 12 greentapes which consist of alumina and glass particle in an organic binder. The GZO thin films deposited on the substrates and were analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The films are well crystallized in the hexagonal (wurzite) structure with increasing thickness. The fabricated sensors showed good sensitivity and fast response time to common types of toxic gases (NOx, COx).

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.599-602
• /
• 2008

Growth of well-aligned ZnO nanostructures on various substrates such as GaN, ITO/glass, and sapphire was realized via a simple aqueous solution method at low temperature of $90^{\circ}C$. Morphology of ZnO nanostructures grown on various substrates as function of substrate was studied. It was found that ZnO nanostructures is a strong function of substrate. It was clearly observed that the morphology of ZnO nanostructures could be varied by change of substrate. Morphology, crystallinity, and crystal characteristics were carried out by FE-SEM, synchrotron x-ray scattering measurements, and high-resolution electron microscopy, respectively.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권4호
• /
• pp.143-148
• /
• 2002

Method of plasma-immersion ion deposition of hydrogenated DLC films on relatively thick flat dielectric substrates from plasma of not-self-sustained low-pressure gas arc discharge is suggested. Coating properties have been investigated experimentally, average energy Per a deposited carbon atom depending on discharge current has been calculated. Optimum deposition parameters lot obtaining sufficiently hard and transparent high-adhesive a-C:H films on a 4-mm thick glass substrates have been determined. Possibility to use these coatings for photo-tools protection from abrasion wear at low operating loads is shown in general.

• 순환기질환의공학회:학술대회논문집
• /
• 순환기질환의공학회 2004년도 제4회 학술대회 초록집
• /
• pp.15-16
• /
• 2004

In summary, we have demonstrated soft lithographic application of HA (or polysaccharides in general) by means of ${\mu}CP$ and molding and constructed well-defined patterns of proteins and cells of various substrates including glass, silicon dioxides, poly(HEMA), polystyrene culture dishes, and biodegradable PLGA. These results suggest that HA could be used as a general platform on hydrophilic substrates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.491-494
• /
• 2006

A number of research groups and companies have succeeded in employing various SLS schemes to create low defect-density Si films on glass substrates for making high performance TFTs. In this paper, we first point out that SLS can be utilized to just as effectively handle crystallization of thin Si films on polymer substrates, and then present preliminary results on high-performance circuits that are built using the materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.80-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing healing temperature and exposure time.