• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.53-59
• /
• 2011

Recently there have been considerable attentions on nanoimprint lithography (NIL) by the display device and semiconductor industry due to its potential abilities that enable cost-effective and high-throughput nanofabrication. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper we focused on the deformation of the $2^{nd}$ generation TFT-LCD sized ($370{\times}470mm^2$) large-area soft mold in the UV imprinting process. A mold was fabricated with PDMS(Poly-dimethyl Siloxane) layered glass back plate(t0.5). Besides, the mold includes large surrounding wall type protrusions of 1.9 mm width and the via-hole(7 ${\mu}m$ diameter) patterend area. The large surrounding wall type protrusions cause the proximity effect which severely degrades the uniformity of residual layer in the via-hole patterend area. Therefore the deformation of the mold was calculated by finite element analysis to assess the effect of large surrounding wall type protrusions and the flexiblity of the mold. The deformation of soft mold was verified by the measurements qualitatively.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.57-60
• /
• 2016

Non Destructive Testing (NDT) methods that are capable of detecting the wall thinning and defects through insulation and cladding sheets are necessary. In this study we developed a Pulsed Eddy Current (PEC) system to detect wall thinning of ferro magnetic steel pipes covered with 95 mm thick fiber glass thermal insulator and shielded with aluminum plate of thickness 0.4 mm. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and a search coil sensor were used as a detecting element. In both the cases, the experimental data indicates a considerable change in the detected pulse corresponding to the change in sample thickness. The thickness of the tube was made to change such as 2.5 mm, 5 mm and 8 mm from the inner surface to simulate wall thinning. Fast Fourier Transform (FFT) was calculated using window approach and the results were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.329-329
• /
• 2013

본 연구에서는 PEDOT:PSS와 crystalline-ITO (c-ITO) 박막 계면에서의 화학적 반응을(박리 및 용해 특성)을 관찰하기위해 spin-coating 및 droplet dropping을 통하여 PEDOT:PSS 용액을 코팅하고 이후 화학적 거동에 따른 전기적, 광학적 및 구조적 특성 변화를 관찰하였다. 강산성을 띄는 PEDOT:PSS (Al 4083) 박막의 코팅 전, 0.4T sodalime glass 위에 열처리를 통하여 성막된 c-ITO 투명전극을 15분 동안 상압 오존 공정을 통하여 계면처리함으로써 다른 변수의 영향을 배제하였으며, 표면 처리 후 spin-coating 및 droplet dropping method를 통하여 PEDOT:PSS를 코팅하여 c-ITO와 PEDOT:PSS 계면사이의 화학적 반응의 영향을 시간 경과에 따라 분석하였다. PEDOT:PSS 코팅 후 솔밴트 제거를 위해 hot plate를 이용하여 $110^{\circ}C$로 열처리되었다. Spin-coating 방법과는 달리 droplet dropping 방법을 통해 형성된 c-ITO 투명전극/PEDOT:PSS 계면에서는 spin coating에서 적용된 동일한 공정변수적용에도 불구하고 PEDOT:PSS의 산성으로 인한 ITO 투명전극 표면에서의 화학적 조성변화가(In, Sn, O의 조성의 변화) 발생됨을 x-ray photoelectron spectroscopy 결과를 통해 확인하였다. 뿐만 아니라 계면 조성반응 변화에 따른 전기적 특성 및 광학적 투과율의 열화가 발생됨을 Hall measurement 측정과 UV/Vis spectrometer 결과를 통하여 도출하였다. 본 결과를 통해 c-ITO/PEDOT:PSS 사이에서 발생되는 내산특성/계면 화학변화가 유기태양전지에서의 산화물 투명전극과 유기물 계면 열화현상에 영향을 받을 수 있음을 나타낸다.

• 대한물리치료과학회지
• /
• 제11권2호
• /
• pp.5-17
• /
• 2004

The purpose of this study was to investigate the relationship between normal adults' resting calcaneal stance position(RCSP) and postural sway. Subjects were 70 normal adults(34 men and 36 women) in their twenties who attend S. University. Postural sway during a single limb stance was measured using the CMS 10 Measuring System when subjects positioned on the balance trainer in their bare foot. RCSP while subjects were standing on the glass plate was measured using the angle tinder after subjects were positioned in prone to divide equally lower leg and calcaneus using the goniometer. The result was as follows. There were significant weak positive correlations between RCSP and postural sway(r=0.362, p<0.01), the leg of the small RCSP within a subject has the small postural sway index($X^2=43.758$, p<0.001). There was no significant difference between groups of rearfoot valgus(RCSp<$2^{\circ}$) and those of rearfoot varus (RCSp>$2^{\circ}$) in the postural sway. In conclusion, there is a weak relationship between increasing the absolute value of RCSP and increasing postural sway.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.39-45
• /
• 1992

강구에 의한 횡방향 저속 충격을 받게 되는 복합재의 충격 응력 및 파동 전파에 관한 이론적 및 실험적 연구가 행하여 진다. 이론적 해석을 위해서는 실험적 접촉 법칙과 연계된 Whitney와 Pagano의 이론에 근거한 판 유한 요소 모델이 사용되며, 실험적 해석을 위해서는 직접적인 충격실험이 수행된다. 이러한 해석을 위한 시험편은 ［0/45/0/­45/0］$_{2s}$와 (90/45/90/­45/90)$_{2s}$ 적층 순서를 가지는 유리/에폭시 적층 복합재이며 경계 조건은 clamped-simply support이다. 결과적으로 이러한 두 해석 결과들이 비교 검토되며, 적층 복합재의 충격 응력 및 파동 전파 특성이 규명된다.명된다.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.54-63
• /
• 2011

Steel plate or FRP materials have been typically used for the seismic retrofit of civil infrastructures. In order to overcome the limitation of each retrofitting material, a composite material, which takes advantages from both metal and fiber polymer materials, has been developed. In the study herein, the composite retrofitting material consists of metal part(steel or aluminum) and FRP sheet part(glass or carbon fiber). The metal part can enhance the ductility and the FRP part the ultimate strength. As a preliminary study to investigate the fundamental mechanical characteristics of the metal-FRP laminated composite material this study performed the tensile test with various experimental variables including the number, the angle and the combination of FRP laminates. From the test results, both aluminum and steel-FRP laminate composite material showed increased fracture toughness. However, the angle and the kind of fibers should be carefully considered in conjunction with the expected loading conditions. In general, steel-FRP laminate composite showed better tensile performance in regards to the seismic retrofit purposes.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.457-460
• /
• 2006

Y doped zinc oxide (YZO) thin films were deposited on F doped $SnO_2$ (FTO) glass substrate by sol-gel method using the spin-coating system. A homogeneous and stable solution was prepared by dissolving acetate in the solution added diethanolamine as sol-gel stabilizer. YZO films were obtained after preheated on the hot-plate for 5minute before each coating; the number of coating was 3 times. After the coating of last step, annealing of YZO films performed at $450^{\circ}C$ for 30 minute. In order to confirming of a ultraviolet ray interruption and down-conversion effects, optical properties of YZO films, transmission spectrum and fluorescent spectrum were used. Also, for understanding the obtained results by experiment, the elestronic state of YZO was calculated using the density functional theory The results obtained by experiment were compared with calculated structure. The detail of electronic structure was obtained by the discrete variational Xa (DV-Xa) method, which is a sort of molecular orbital full potential method. The density of state and energy levels of dopant element were shown and discussed in association with optical properties.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.191-204
• /
• 2015

Control of the mechanical behavior of composite materials and structures under monotonic and dynamic loads for cracks and damage is a vast and complex area of research. The modeling of the different physical phenomena and behavior characteristics of a composite material during deformation play an important role in the structural design. Our study aims to analyze numerically the energy release rate parameter G of a composite laminated plate (glass or boron / epoxy) cross-ply [$+{\alpha}$, $-{\alpha}$] in the presence of a crack between two circular notches under the effect of several parameters such as fiber orientation ${\alpha}$, the crack orientation ${\beta}$, the orientation ${\gamma}$ of the two considered circular notches and the effect of mechanical properties. Our results show clearly that both notches orientation has more effect on G than the cracks and fibers orientations.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.159-166
• /
• 2007

Mixing between two or more reagents is one of important processes in biochemical microfluidics. In efficient micromixer design, it is essential to analyze flow pattern and evaluate mixing efficiency with good precision. In this work, mixing efficiency for Y-channel micromixer is measured by fluorescence intensity using LIF(Laser Induced Fluorescence) Confocal Microscope. The Y-channel micromixers are fabricated with polydimethylsiloxane(PDMS) and those are bonded to glass plate through Plasma bonding. Nile Blue A is injected into the micromixer as a fluorescence dye for measuring of fluorescence intensity by He/Ne laser. For visualization of the flow pattern, dynamic image capturing is carried out using CAM scope. For the comparison with computer simulation, modified SIMPLE algorithm for incompressible flow equation is solved for the same geometry as in the experiment. Throughout the experiments and computer simulation, accurate mixing efficiency evaluation process for a PDMS Y-channel micromixer is established.

• 반도체디스플레이기술학회지
• /
• 제9권4호
• /
• pp.77-81
• /
• 2010

The AZO thin films were deposited on the corning 1737 glass plate by the RF magnetron sputtering and effects of working pressure and oxygen contents on the electrical properties were investigated. XRD spectra showed a preferred orientation along the c-axis and a minimum FWHM for the 70mTorr. From the surface analysis (AFM), the number of crystal grain of AZO thin film increased as working pressure increased. The film deposited with 70mTorr of working pressure showed n-type semiconductor characteristic having suitable resistivity $-1.59{\times}10^{-2}{\Omega}cm$, carrier concentration $-10.1{\times}10^{19}cm^{-3}$, and mobility $-4.35cm^2V^{-1}s^{-1}$ while other films by 7 mTorr, 20 mTorr of working pressure closed to metallic films. The films including the oxygen represent stoichiometric composition similar to the oxide. The transmittance of the film was over 85% in the visible light range regardless of the changes in working pressure and oxygen contents.