• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.137-139
• /
• 2015

In this study, we examined the influence of molten $KNO_3$ flow on mechanical properties and their deviation when a chemical toughening process was applied to soda lime silicate glass ($Na_2O-CaO-SiO_2$). $KNO_3$ melt flow was controlled using three methods: (1) glass tray rotation, (2) impeller stirring, and (3) natural convection. DOL and hardness were found to be enhanced by tray rotation because this rotation was able to maintain the concentration around the glass surface, in contrast to other methods. However, there did not appear to be a statistically significant difference in the 3-point bending strength for the three flow conditions due to the ground edge condition.

• Nuclear Engineering and Technology
• /
• 제30권1호
• /
• pp.1-7
• /
• 1998

Effects of pH, bentonite and Portland cement on the leaching of the simulated waste glass were investigated. The simulated waste glass showed the low leach rate in the neutral pH region, while the leach rate in both acidic and alkaline regions increased. Addition of bentonite to the leachant enhanced the leaching of the waste glass. When the waste glass was leached at 72$^{\circ}C$ for 36 days in the ground water with gel state Na-bentonite, approximately 2.2${\mu}{\textrm}{m}$ of the surface was corroded out and the large amount of Ti, Nd, and Zr was observed on the surface. The amount of B leached from the simulated waste glass in the presence of domestic bentonite was about three times higher than that in the presence of Aldrich bentonite as well as Portland cement.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.115-132
• /
• 1996

연약지반 안정화공법으로서 각종 고결공법이 성행하고 있으나 해성점토지반이나 통수지반과 같은 특수조건하에서는 시공도 까다롭지만 강도발현이나 내구성 등의 측면에서 보강효과가 저하하는 것을 볼 수 있다. 고결공법은 혼합(고압)처리방식과 주입방식으로 대별할 수 있는 데, 본 연구에서는 첫째로 해성점토지반에 시멘트에 의한 지반보강시의 강도열화문제와 두번째로 지하수흐름이 있는 지반에서의 물유리계 약액주입시의 주입효과증대 및 내구성 문제에 촛점을 맞추어 그 해결방안을 검토 하였다.

• 한국조경학회지
• /
• 제28권2호
• /
• pp.28-38
• /
• 2000

The aim of this study is evaluate artificial soils which are used alone or in a blend with field soil for the greening of artificial ground. To achieve these, determination of physicochemical properties was made in four artificial media[Perlite small grain(PSG), perlite large grain(PLG), crushed porous glass+bark(AS), crushed porous glass(CPG)] used alone and/or in a blend with field soil, then evaluation of their effect on th plant growth of Ligustrum obtusifolium and Syringa vulgaris were conducted. In bulk density of root media at field capacity and the saturated hydraulic conductivity, LG and AS showed good performance. But, PLG was though to be unsuitable as artificial soil when used alone because of poor plant growth. PLG, AS, and CPG were thought to be good when it is used in a blend with field soil. But, PSG was thought to be unsuitable. In the result, PSG is recommended as artificial soil which is used alone for greening of artificial ground. PLG is recommended as artificial soil which is used in a blend with field soil. AS is recommended as artificial soil which is used alone and in a blend with field soil. Thought CPG+field soil(v/v, 1:1) might be undesirable in consideration of the chemical properties in six months after planting, it was thought to be superior to th other treatments in the plant growth. CPG can be used as artificial soil which is used in a blend with field soil. Follow-up studies are being conducted to investigate their effects on the plant growth of the other plants and the practical use of them in artificial grounds.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.21-28
• /
• 2003

The purpose of this study was to process bio-active glass ceramic composite, reinforced with sapphire fibers, by hot press. Also to study the interface of the matrix and the sapphire fiber, and the mechanical properties. Glass raw materials melted in Pt crucible at 1300$^{\circ}C$ during 3.5 hours. The melt was crushed in ball mill and then crushed material, ground and sieved to $<40{\beta}{\mu}m$. Sapphire fibers cut (30mm) and aligned. Powder and fibers hot pressed. The micrographs show good bonding between the matrix and the fiber and no porosity in the glass matrix. This means ideal fracture phenomena. Glass is fractured before the fiber. This is indication of good fracture strength. EDXS showing aluminum rich phase and crystalline phase. Bright field image of the matrix showing crystalline phase. Also diffraction pattern of TEM showing the crystalline phase and more than one phase. Strength of the samples was determined by 3 point bend testing. Strength of the 10vol% sample was approximately 69MPa, while strength of the control sample is 35MPa. Conclusions through this study as follow: 1. Micrographs show no porosity in the glass matrix and the interface. 2. The interface between the fiber and the glass matrix show no gaps. 3. Fracture of the glass indicates characteristic fiber-matrix separation. 4. Presence of crystalline phase at high processing temperature. 5. Sapphire is compatible with bioactive glass.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.546-548
• /
• 2003

The expanded waste glass material is one of the recycling materials. We investigated whether the expanded waste glass material is useful as planting basis and effective as heat insulation. We examined the difference of the materials by using vegetation index and temperature. The combination of the improved soils and the improved glasses marked higher vegetation index than other mixture materials. Moreover, this combination material is excellent than other ones to heat insulation. Therefore, it suggests that the expanded waste glass material has high potential to be used as a material for planting basis.

• Advances in concrete construction
• /
• 제6권1호
• /
• pp.29-45
• /
• 2018

This paper investigates the effect of inclusion of glass fibers on mechanical and fracture properties of binary blend geopolymer concrete produced by using fly ash and ground granulated blast furnace slag. To study the effect of glass fibers, the mix design parameters like binder content, alkaline solution/binder ratio, sodium hydroxide concentration and aggregate grading were kept constant. Four different volume fractions (0.1%, 0.2%, 0.3% and 0.4%) and two different lengths (6 mm, 13 mm) of glass fibers were considered in the present study. Three different notch-depth ratios (0.1, 0.2, and 0.3) were considered for determining the fracture properties. The test results indicated that the addition of glass fibers improved the flexural strength, split tensile strength, fracture energy, critical stress intensity factor and critical crack mouth opening displacement of geopolymer concrete. 13 mm fibers are found to be more effective than 6 mm fibers and the optimum dosage of glass fibers was found to be 0.3% (by volume of concrete). The study shows the enormous potential of glass fiber reinforced geopolymer concrete in structural applications.

• International Journal of Concrete Structures and Materials
• /
• 제10권3호
• /
• pp.337-353
• /
• 2016

The successful completion of the present research would be achieved using ground waste glass (GWG) microparticles in self-consolidating concrete (SCC). Here, the influences of GWG microparticles as cementing material on mechanical and durability response properties of SCC are investigated. The aim of this study is to investigate the hardened mechanical properties, percentage of water absorption, free drying shrinkage, unit weight and Alkali Silica Reaction (ASR) of binary blended concrete with partial replacement of cement by 5, 10, 15, 20, 25 and 30 wt% of GWG microparticles. Besides, slump flow, V-funnel, L-box, J-ring, GTM screen stability, visual stability index (VSI), setting time and air content tests were also performed as workability of fresh concrete indicators. The results show that the workability of fresh concrete was increased by increasing the content of GWG microparticles. The results showed that using GWG microparticles up to maximum replacement of 15 % produces concrete with improved hardened strengths. From the results, when the amount of GWG increased there was a gradual decrease in ASR expansion. Results showed that it is possible to successfully produce SCC with GWG as cementing material in terms of workability, durability and hardened properties.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.261-265
• /
• 2012

In this study, glassy carbon was ground for lens core of glass mold press. Ultraprecision grinding process was applied for machining of core surfaces. During the process, brittle crack occurred because of hard-brittleness of glassy carbon. Author investigated optimized grinding conditions from the viewpoint of ductile mode grinding. Geometrical undeformed chip thickness was adopted for critical chip thickness that enables crack free surface. Machined cores are utilized for biaspheric glass lens fabrication and surfaces of lens were compared for verification of ground surface.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.409-416
• /
• 2000

This research aims at evaluating the seismic performance of the existing R/C bridge piers which were nonseismically or seismically designed in accordance with the provision of Korea Highway Design Specification. Further experimental investigations have been doing to figure out the retrofitting effects of nonseismic R/C bridge piers confined with glass fiber at the plastic hinge zone. Pseudo-dynamic tests have been carried out on nine scaled R/C column specimens to investigate their hysteretic behavior under earthquake loading, Test parameters are axial load input ground motion confinement steel ration glass fiber and etc,