• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.635-639
• /
• 2006

Dispersion behavior of the slurries consisted of Pb or Bi-based glass frits, which are used for the fabrication of green sheet as PDP front panel transparent dielectric, was examined in non-aqueous solvent system. Measurements of sedimentation height and viscosity were conducted to determine proper dispersion condition in the various solvent and dispersant system. Azotropic compound and ethyl acetate were used as the solvent and ammonium-type dispersant was applied to the slurries. All slurries were dispersed well in azotropic solvent system involving 20$\sim$50 vol% ethyl acetate at 2$\sim$3 wt% dispersant content. Especially, dispersion behavior was notably improved in the addition of ethyl acetate in the Bi-based frit slurry.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.434-439
• /
• 2008

Silver pastes as the outer electrodes have been prepared using Pb-free glass frits with different content of $Bi_2O_3$ and the effects of glass composition on the degradation behaviors of the Ag electrodes were investigated using the change of adhesion between Ag electrode and alumina substrate with thermal cycle stress. Low adhesion and high surface resistance were observed in Ag electrode using glass frit with a $Bi_2O_3$ content of 60 wt%, owing to the open microstructure formed at the firing temperature of $600^{\circ}C$. When the $Bi_2O_3$ was increased to 80 wt% in the glass frit, the Ag electrodes had a dense microstructure with high adhesion and a low surface resistance. Delamination of the Ag electrodes was a major failure mode under thermal cycle stress and this was attributed to residual stress due to the thermal expansion mismatch between the Ag electrode and the alumina substrate.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1988-1994
• /
• 2001

The CRT(Cathode-ray Tube) of salvage is a process of separating the panel and funnel to recycle a cathode-ray tube. In this paper, the thermal properties of glass for CRT were studied to improve its recycling ratio. In the salvage process, several patterns of breakage, as called 'comer pull', were easily generated on the sealing surface of panel or funnel glass due to the residual tensile stress, which had correlations with some parameters of the manufacturing process of CRT and the initial material properties of glass. Finite element analyses and experimental approaches on the flit sealing process were carried out to obtain the major characteristic of glass related to the residual stress. From this study, it was identified that the thermal expansion coefficient of glass had much influence on the residual stress of panel glass after frit sealing process. Therefore, the optimal conditions of thermal properties for CRT glass were proposed to achieve an effective salvage process. By using these optimal conditions, the size of comer pull on the panel and funnel glass was reduced to 10% level compared with the original size, and the recycling ratio of CRT was increased in the salvage process.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.582-588
• /
• 2002

Ti 기판에 TiO$_2$ 중간층을 플라즈마 용사법으로 증착 후 IrO$_2$-RuO$_2$ 박막을 졸-겔과 dip coating법으로 제조하였다. 코팅 층의 접착력을 향상시키기 위하여 유기화합물과 glass brit을 첨가하였다. Taguchi법의 망대특성과 Lls(2$^1$$\times$3$^{7}$ )의 직교배열표를 이용하여 IrO$_2$-RuO$_2$ 박막의 최적조건인 인자와 수준 조합의 최적화를 전류밀도를 측정 분산분석하였다. 최적의 코팅조건은 각각 ethyl cellulose의 점도는 100cp, 건조온도 및 시간은 17$0^{\circ}C$ 20분, 열처리온도 및 시간은 75$0^{\circ}C$ 10분, 전도성 분말과 glass frit의 무게비는 99:5, 최종열처리시간은 120분, 주입산소량은 5sccm이었다. 분산분석결과, 유의수준이 $\alpha$=0.1인 통계적으로 90%신뢰공정이었다.

• 한국재료학회지
• /
• 제19권11호
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.548-551
• /
• 2004

For the improvements in high transmittance, one of the most important factors of transparent dielectric is pore contents and pore size. This study have investigated the effect of frit size on the transmittance of zinc-boric system with a Pb-free composition. A mixed glass paste was used for thick films, which were made by screen printing methods on a glass substrate (PD200). These dielectric layers were measured for surface roughness, pores content and transmittance. The results show that increase of pore size and content have detrimental effects on the transmittance of films compared to those found in the PbO system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1360-1363
• /
• 2007

The bus electrode is composed of two layers. One is the black matrix(BM) and silver layer is formed on top of black layer. The BM paste is made by mixing $Co_3O_4$ black powder with photosensitive vehicle and rheological additives. In this work we studied the effect of $Co_3O_4$ black powder and glass frit on the rheological property of photosensitive BM paste. We also examined how the size and content of black powder and glass frit affect the transmittance and reflectance of the BM layer after sintering.

• 대한화학회지
• /
• 제35권6호
• /
• pp.699-706
• /
• 1991

헬륨 기체를 사용하여 중급 출력(500W) 마이크로파 유도 플라즈마(Microwave Induced Plasma:MIP)를 헬륨 기체를 사용하여 만든 뒤 직접 수용액 시료 분석에 사용하였다. Beenakker의 cavity를 변형시켜 얻은 안정된 헬륨 플라즈마는 실린더 형태의 모양을 하고 있고 기체의 흐름량을 조절하여 "toroidal"형태의 플라즈마도 얻을 수 있으나 분석학적 능력은 오히려 감소되었다. Glass Frit Nebuliser를 이용하여 분석하였을 때 금속 원소는 10~100 ppb 근처의 검출한계를 보였고 비금속원소인 염소의 경우는 50ppm근처의 검출한계를 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.71-75
• /
• 2001

The first step for recycling the CRT bulb is to remove frist seals between the panel and funnel. For this purpose, various kinds of methods have been used. One of those is to use the nitric acid, which is a proven technology and widely used in CRT-making industries. The process. however. has a problem of NOx generation. Such a drawback can be overcome by using a new chemical. This new chemical can remove the frit without NOx generation. This paper describes the dissolution ability of the chemical for lead and zinc oxides and the application to the separation of the CRT panel from its funnel.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.236-240
• /
• 2012

Limiting thermal exposure time using rapid thermal processing(RTP) has emerged as promising simplified process for manufacturing of solar cell in a continuous way. This paper reports the simplification of co-firing using RTP. Actual temperature profile for co-firing after screen printing is a key issue for high-quality metal-semiconductor contact. The plateau time during the firing process were varied at $450^{\circ}C$ for 10~16 sec. Glass frit in Ag paste etch anti-reflection layer with plateau time. Glass frit in Ag paste is important for the Ag/Si contact formation and performances of crystalline Si solar cell. We achieved 17.14% efficiency with optimum conditions.