• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.415-423
• /
• 2016

원통형 단판적층재는 단판 테이프를 원형 실린더에 감아서 제작된 제품이다. 단판 테이프는 단판을 직사각형으로 제단한 후 섬유 수직방향으로 재봉하여 제작하였다. 단판의 수종과 재봉사의 종류 및 재봉사의 조합을 다르게 제작한 단판테이프로 인장강도 실험이 실시되었다. 라디에타 소나무 단판에 강화 재봉사를 사용하여 재봉선 3줄로 제작한 단판 테이프의 인장강도 성능이 가장 우수하였다. 또한 단판 테이프의 이격 및 끊어짐 현상이 개선되어 원통형 단판 적층재의 작업성이 향상되었다. 원통형 단판적층재는 단판 테이프의 종류와 직물형 유리섬유의 보강 유무 및 단판 적층 수를 다르게 제작하여 낙엽송 원목과 휨강도 성능을 비교 검토하였다. 직물형 유리섬유를 체적비 11%로 보강한 시험편은 휨 파괴계수가 보강하지 않은 시험편보다 65% 향상되었다. 재봉선 2줄 단판 테이프로 제작한 원통형 단판적층재는 단판 테이프 간 Butt joint에서 파단이 발생하였다. 하지만 재봉선 3줄 단판 테이프로 제작한 원통형 단판적층재는 섬유방향으로 파단이 발생하였다.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.118-123
• /
• 2017

It is well known that water jetting is now widely used in the advanced cutting processes of polymers, metals, glass, ceramics, and composite materials because of some advantages, such as heatless and non-contacting cutting different from the laser beam machining. In this paper, we proposed the simulation model of waterjet by lengths and the inner spiral structure of the nozzle. The simulation results show that the outlet velocity of the nozzle is faster than the inlet. Furthermore, we found rapid velocity reduction after passing through the outlet. The nozzle of diameter ${\phi}500$ and length 70mm, shows the optimal fluid width and velocity distribution. Also, the nozzle with inner spiral structure shows a Gaussian distribution of velocity and this model is almost twice as fast as the model without spiral structure, within the effective standoff distance (2.5 mm). In the future, when inserting abrasive material into the waterjet, we plan to analyze the fluid flow and the particle behavior through a simulation model.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.213-218
• /
• 2013

초음파 가공(Ultrasonic Machining:USM)은 새로운 기계가공기술 분야 중의 하나이다. 초음파 가공 과정은 비열, 비화학, 그리고 비전도의 방법이기 때문에 공작물 재료의 물리적, 화학적 변화가 없다. 이러한 특성으로 인해 초음파 가공기술은 유리, 세라믹 등과 같은 취성재료의 가공에 적합하다. 그러나 단점으로는 초음파 진동을 이용하여 취성재료를 가공하는 경우 크랙이 빈번하게 발생한다. 본 논문에서는 유리와 세라믹의 미세 구멍가공에서 다구찌 방법을 이용하여 크랙발생을 최소화하는 최적의 가공조건을 얻고자 하였다. 이를 통해 공작물의 입구 및 출구에서 발생하는 크랙 현상을 감소시켰다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.817-823
• /
• 2020

In recent, the machining of difficult-to-cut materials such as titanium alloys, stainless steel, Inconel, ceramic, glass, and carbon fiber reinforced plastics (CFRP) used in aerospace, automobile, medical industry is actively researched. Abrasive waterjet is a non-traditional processing method in which ultra-high pressure water and abrasive particles are mixed in a mixing chamber and shoot out jet through a nozzle, and removed by erosion due to collision with a material. In particular, the nozzle of the abrasive waterjet is one of the most important parts that affect the machining quality as with a cutting tool in general machining. It is very important to monitor the condition of the nozzle because the workpiece is uncut or the surface quality deteriorates due to wear, expanding of the bore, damage of the nozzle and clogging of the abrasive, etc. Therefore, in this paper, we propose a monitoring system based on Acoustic Emission(AE) sensor that can detect nozzle condition in real time during AWJ processing.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.3-6
• /
• 2008

Electrolytic in-process dressing (ELID) grinding is a new technique for achieving a nanoscale surface finish on hard and brittle materials such as optical glass and ceramics. This process applies an electrochemical dressing on the metal-bonded diamond wheels to ensure constant protrusion of sharp cutting grits throughout the grinding cycle. In conventional ELID grinding, a constant source of pulsed DC power is supplied to the ELID cell, but a feedback mechanism is necessary to control the dressing power and obtain better performance. In this study, we propose a new closed-loop wheel dressing technique for grinding wheel truing that addresses the efficient correction of eccentric wheel rotation and the nonuniformity in the grinding wheel profile. The technique relies on an iterative control algorithm for the ELID power supply. An inductive sensor is used to measure the wheel profile based on the gap between the sensor head and wheel edge, and this is used as the feedback signal to control the pulse width of the power supply. We discuss the detailed mathematical design of the control algorithm and provide simulation results that were confirmed experimentally.

• 한국터널지하공간학회 논문집
• /
• 제3권1호
• /
• pp.11-19
• /
• 2001

이 연구는 강관 보강형 다단 그라우팅공법의 설치 및 절단 시 어려움, 부식에 취약한 문제점 등을 개선하는데 목적이 있으며, 강관 대신에 고강도 유리섬유(fiberglass)를 이용한 FRP(Fiberglass Reinforced Plastic)의 적용성에 대한 연구를 수행하였다. 연구결과는 강관에 비하여 FRP 보강재의 가격이 높긴 하지만 시공성 및 내구성 등에서 우수한 것으로 파악되었다. 그리고 FRP 보강재의 형상에 따른 수치해석 결과에서는 국외에서 상용화 된 판상형 보강재 보다 등각곡선형 보강재가 더 구조적 측면에서 효율적임을 알 수 있었고, 그라우트 복합체에 대한 굴곡강도시험 결과에서는 강관과 FRP 보강재의 지보효과가 유사한 것으로 평가되었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.174-177
• /
• 2010

We have developed an environment-friendly etching process, an alternative to the dichromic acid etching process, as a pretreatment of acrylonitrile-butadiene-styrene (ABS) plastic for electroless plating. In order to plate ABS plastic in an electroless way, there should be fine holes on the surface of the ABS plastic to enhance mechanically the adhesion strength between the plastic surface and the plate. To make these holes, the surface was coated uniformly with dispersed chemical foaming agents in a mixture of environmentally friendly dispersant and solvent by the methods of dipping or direct application. The solvent seeps into just below the surface and distributes the chemical foaming agents uniformly beneath the surface. After drying off the surface, the surface was heated at a temperature well below the glass transition temperature of ABS plastic. By pyrolysis, the chemical foaming agents made fine holes on the surface. In order to discover optimum conditions for the formation of fine holes, the mixing ratio of the solvent, the dispersant and the chemical foaming agent were controlled. After the etching process, the surface was plated with nickel. We tested the adhesion strength between the ABS plastic and nickel plate by the cross-cutting method. The surface morphologies of the ABS plastic before and after the etching process were observed by means of a scanning electron microscope.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.95-95
• /
• 2013

The NdFeB magnet can be classified into the sintered magnet and bonded magnet. The former has superior magnet characteristics but the degree of freedom in shape is highly restricted, whereas the latter has a high degree of freedom, but its magnet characteristics are inferior to the former. When a NdFeB magnet is used at the elevated temperature, part of Nd must be replaced with a high priced Dy to increase its coercive force. For these reasons, a Dy free and high performance NdFeB bonded magnet is desired strongly. The author successfully developed a Dy free NdFeB anisotropic bonded magnet based on discovery of new phenomena called as d-HDDR reaction and its mass production process such as a thermally balanced hydrogen reaction furnace, micro capsuled powder, compression molding / injection molding under magnetic field, magnetic die and so on. Applied to DC brush seat motor for automotive use, the motor has become 50% small in size and weight. The commercialization of a half sized motor for automotive use has been realized up to the market share of 30%. At present, its commercialization is extending to various types of motors such as power tool, ABS motor, wiper motor, window motor, electric bike power motor, and compressor motor. It is expected that the applications will be increasingly enlarged to EV motor, wind generator, EPS motor, washing machine, and glass cutting machine. This innovative technology has realized Dy free high performance magnet and mudt make big contribution to not only rare element strategies but also energy conservation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.831-836
• /
• 2000

During machining, since more than 50% compliance of the cutting point in machine tool structures comes from headstocks, with the remainder coming from beds, slides and structural joints, the structural analysis of the headstock is very important to improve the static and dynamic performances. Especially, in case of machining hard and brittle materials such as glasses and ceramics with the grinding machine, the reinforced headstock with the high damping material is demanded. Since the fiber reinforced composite materials have excellent properties for structures, owing to its high specific modulus, high damping and low thermal expansion, it is expected that the dynamic and thermal characteristics of the headstock will be improved if they are employed as the materials fur headstock. In this paper, the design and the manufacturing methods as well as the static and dynamic characteristics of a steel-composite hybrid headstock were investigated analytically and experimentally to improve the performance of the grinding machine system.