• Journal of Ginseng Research
• /
• v.20 no.3
• /
• pp.248-255
• /
• 1996

This study was devised to observe in vitro, the inhibitory effects of acidic polysaccharide fractions from Korean red ginseng (KRG) and white ginseng (KWG) on the lipolytic action of loxohormone-L and on angiotensin converting enzyme (ACE, peptidyldipeptidase hydrolase, EC 3.4.15.1) . The crude acidic polysaccharides (CAP) extracted from main and lateral roots of KRG and KWG were separately purified through several procedures. The total inhibitory activities on the lipolytic action of toxohormone-L of CAP from main roots of KRG and KWG was higher than those of CAP from lateral roots of KRG and KWG, respectively, and that of CAP from main root of KRG was 3.1 times higher than that of CAP from main root of KWG. The specific activity of CAP from main root of KRG was measured as 5.40 units/mg, when one unit was defined as the amount giving 50% inhibition on toxohormone-L induced lipolysls. A subfraction named PG4 3 obtained by replanted chromatography on DEAE-TOYOPEARL 650M gave the specific activity of 24.4 units/mg. On the other hand, it was found that the total inhibitory activity on ACE of CAP from lateral root of KRG was the highest among the 4 kinds of CAP, but the specific activity of CAP from lateral root of KWG was the highest.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2002

Polymerization of carboxylated styrene-butadiene latex takes longer time than that of acrylic emulsion due to delocalization of radical in butadiene unit having conjugated double bond. A latex stability is the most important properties owing to use intact without separating polymer from base latex. For reducing polymerization time without decreasing any properties of latex, carbon tetra-chloride which has been used as the most popular chain transfer agent was replaced to combination of tert-dodecylmercaptane and ${\alpha}$-methylstyrene dimer. The replacement yielded reducement or 2 hr in polymerization time. In the increment step, charge amount of acrylic acid was limited to 0.3 part to restrain viscosity enhancement. Just after initial step, addition of 0.1 part acrylamide prevent polymer chain from diffusing between two region followed by giving hardness and final good adhesive force to latex particles.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.77-81
• /
• 2019

Recently, Korea has been making efforts at the government level to overcome the national crisis that Japan's dependency on technology in the semiconductor and display materials sectors has also escaped due to export regulations on three materials carried out by Japan. Therefore, based on the data of the National Science & Technology Information Service (NTIS) operated by the government, we analyze the trend of R & D investment in the display field, thereby improving R & D to improve material technology competitiveness in the future. Let's examine the implications of investment. A total of 5 years of new research and development investment in the field of display was invested as basic research fund for 25%, 15% for applied research, and 53% for development research. In terms of development cost and development period, the basic research showed that the amount of money and the development period were shorter than that of applied research. In other words, the basic research accounted for 25% of the R & D investment and the average R & D period was only 3.2 years. As we can see from the recent development of H fiber carbon fiber, which was recently developed and entered full-scale production, we were able to succeed because of the benefits of government support for 10 years while giving the same material title differently. In order to escape from Japan's technological dependence on semiconductor and display materials in Korea, As such, basic research in the field of materials is only possible when long-term research is conducted.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.189-194
• /
• 2013

Semantic Web is what supports a search, data integration, and automated web service by developing technology of giving help so that a computer can understand information a little more on the web. As amount of information gets growing and diverse, there is a problem of offering by efficiently extracting and processing only information proper for users' demand. Semantic Web isn't what is distinguished completely from the existing web. It gives a meaning, which was well defined, to information of being inserted on web by expanding the current web. Through this, a computer and a person come to perform work cooperatively. To implement Semantic Web, the limit of HTML needs to be overcome. The existing access authorization has not taken information and semantics into account due to the limitations of HTML. It is difficult to expand or integrate many relevant documents by using HTML. Program or software agent, not a person, cannot extract a meaning of document automatically. This study suggests a method of Access Authorization Policy Management that is in the Semantic Web configuration. Accordingly, the policy, which was designed in this study, improved the authorization process more than the existing method.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.77-86
• /
• 1999

The bow flare structure of a ship is designed considering wave impact loads largely caused by relative motion of the ship and wave at rough sea. Empirical design is still used because impact phenomenon and structural behaviour due to wave impact load can not examined accurately. The objective of this study is, as the first step, to predict wave impact loads giving the structural damages to the bow flare structure from the damage data inversely, using dynamic nonlinear finite element code LS/DYNA3D, and to perform various parametric studies of wave impact pressure curve for its characteristics, such as peak height, duration time, tail height, rise time, etc.. The followings were obtained from this study: Dynamic structural responses against wave impact loads are largely affected by impact pressure impulse whose amount during duration time until peak deformation is very important.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.331-334
• /
• 2011

This is a study about a platform realization measuring the extent of reaction in nerve, as giving a electrical impulse on a nerve pulp regulating a function of muscle, about a measurement of nerve reaction in the amount of current, the lasting time of current, and the position of electrode from a electrical impuls.The position of an electrode in a electrical nerve impuls have nothing to do with all nerves from exercise to all things. There is the Single Twitch Stimulation(STS), Train-of-four(TOF), and Double Burst Stimulation(DBS) in the form of nerve stimulation. This report is needed for selecting MCU of low electric power for a base in embedded system and measuring the extent of reaction after making a sensor interface to know sensitivity of measuring sensor in basic reaction of nerve impuls. The platform is realized to select a high efficiency AD Convertor for raising accuracy in measured data. As the platform in this report was developed for a medical appliances, it was designed to consider user safety in electric power Isolation when making electric power circuit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.254-266
• /
• 2005

The purpose of this study were to develop snow-board upper wear with improved functionality. The study consisted of figure out appropriate ease amount of snow-board upper wear and make products by applying it to pattern design. The results of this study were as follows : First, The results of examined the difference between naked body measurements of and basic wear. According to motion, chest circumference(4.7cm, 5.1%), back width(8.9cm, 20.7%), and waist back length(8.0cm, 18.3%) increased. Around the elbow the length increased by 4.4cm(21.9%) when it was bent 90 degrees, while it increased by 6.0cm(29.8%) when it was bent to the full(145 degree). Second, 3 snow-board upper wear were selected and evaluated their appearance, comforts, and functionality, and that of the biggest margin proved to be the best. Eases necessary for motion proved to be insufficient especially in neck, arm and wrist parts of upper clothing. Third, on the basis of the analysis of snow-board upper wear on market, 2 pieces of experimental snowboard upper wear were designed, produced, and evaluated the patterns of with different ease, and snowboard upper wear B for experiment was proved to be better, Fourth, Snowboard upper wear was produced and evaluated for experiment 2 by giving additional ease to specific parts. Therefore experiment 2 was presented pattern, ease, and size of snowboard upper wear for with snowboard upper wear with improved functionality.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• Journal of Korean Medicine for Obesity Research
• /
• v.2 no.1
• /
• pp.95-104
• /
• 2002

Objects. There was an increase in obese population due to eating habits resulted in modernization of lifestyle and the change of the tendency to conduct the physical activity, in order words, the reduction in the range of kinetic energy. Obesity is viewed as a major risk factor for serious health problems, including heart disease, high blood pressure, stroke, diabetes, and certain forms of cancer as well as for psychological and social problems owing to our fat-phobic society. In the present study, we investigate the weight loss thanks to giving Handayulso-tang(HD) medication of Taeum-in to induced obesity rats and its effects on lipid metabolism, given that their behavior patterns are changed according to their constitution. Methods: The extracts of Handayulso-tang was orally administered to the rats of HD group 200mg/200g of rats weight every day for 6 weeks, and the control group were fed with equal amount of saline. And measured the body weight and total cholesterol, triglyceride, free fatty acid and total lipid contents in serum in obese rats. Results: 1. The body weight in HD group were decreased. 2. The contents of serum total cholesterol and triglyceride in HD group were decreased and statistically showed the significant difference compared with the control group. 3. The contents of serum free fatty acid and total lipid in HD group were decreased, but did not statistically show the significant difference compared with the control group. Conclusion: Based on the above results, we know that Handayulso-tang have effects on the decrease of the body weight and the contents of serum total cholesterol, triglyceride, free fatty acid and total lipid So it could be concluded that Handayulso-tang can help the treatment of obesity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.573-575
• /
• 2016

Consumption habits of children who economic consumption habits has not been established is a very big concern for parents. According to the credit recovery committee (2006) youth consumption behavior and needs assessment of the education of, he answered that 60.9% of young people have experienced the impulse buying. Student consumption of is done in pin money to receive almost to the parent. Most of the pin money, in order to be paid in cash, is often consumed with the payment directly in the offline sales floor. Pin money is, or waste to students senseless consumption, to trick the price of the purchase goods, to parents, so as to require a greater amount without parental monitoring and agree. In this paper, we would like to propose a system to solve the problem of giving the authority to make decisions off-line payment from student to the parent.