• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.619-628
• /
• 2001

A viscoelastic constitutive equation of rubber is proposed under small oscillatory load superimposed on large static deformation. The proposed model is derived through linearization of Simos nonlinear viscoelastic constitutive model and reference configuration transformation. Statically pre-deformed state is used as reference configuration. The model is extended to a generalized viscoelastic constitutive equation including widely-used Mormans model. Static deformation correction factor is introduced to consider the influence of pre-strain on the relaxation function. The model is tested for dynamic behavior of rubbers with different carbon black fractions. It is shown that the constitutive equation with static deformation correction factor agrees well with test results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.20-20
• /
• 2001

본 논문에서는 퍼블릭 워터마킹(public watermarking)에서 영상 블록의 유효성에 기반을 둔 상호연관성(cross-correlation property)과 관련기법을 제안하였다. 이 과정에서 워터마크의 비인식성(imperceptibility)과 깨지기 쉬운 워터마크(fragile watermark)를 보장하기 위하여 DCT(Discrete Cosine Transformation) 도메인의 고주파 영역을 사용하였다. 여러 가지 실험을 통하여 에러가 보정된 원본 영상(original image)들과 워터마크된 이미지(watermarked image)들 사이에 유효한 블록들이 동일함을 확인하였다. 그리고 이러한 상호연관성이 추후의 퍼블릭 워터마킹을 위한 응용들에 적용될 수 있음을 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.464-467
• /
• 2003

There are two approaches to construct mobile GIS, Vector and Raster methods, according to the map data transformation format from server to mobile client. Each method requires a different implementation architecture of server and client modules for mobile map services. And each have advantages and disadvantages at the different aspects. This thesis implements these two approaches, thus, compares the each merits, by experiments. They include the transmission performance, map quality, and so on.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1316-1321
• /
• 2003

The systematic method to construct equivalent static load from the given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. They may results in unreliable structural design. The present study proposes a selection scheme of degrees of freedom(d.o.f) for imposing the equivalent static loads. The d.o.fs are selected by Two-level condensation scheme(TLCS). TLCS consists of two two-steps. The first step is the energy estimation in element-level and the second step consists of the traditional sequential elimination precudure. Through several numerical examples, the efficiency and reliability of proposed scheme is verified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.181-182
• /
• 2011

Phase-change materials can be cycled by exposure to laser beam, and as a function of the pulse intensity and duration, the laser beam triggers the switching from crystalline to amorphous phase and back. In other to progress better crystallization transition and amorphization long phase-transformation data of phase-change memory (PRAM), we investigated about the effect of Sb doping and Ag ions percolating into Ge-Se-Te phase-change material. Doped Sb concentrations was determined each of 10, 20 and 30 wt%. As the Sb-doping concentration was increased, the resistivity decreased and the crystallization temperature increased. Ionization of Ag was progressed by DPSS laser (532 nm) for 1 hour. The resistivity was more decreased and the crystallization temperature was more increased in case of adding Ag layer under Sb-(Ge-Se-Te) thin film. At the every condition of thin films included Ag layer more stable states were indicated compare with just Sb-doped Ge-Se-Te thin films.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.85-99
• /
• 2008

The dynamic response analysis for large structures using finite element method requires a large amount of computational resources. This paper presents an efficient vibration analysis procedure by combining node-based substructuring reduction method with a response analysis scheme for structures with undamped, proportional or nonproportional damping. The iterative form of substructuring reduction scheme is derived to reduce the full eigenproblem and to calculate the dynamic responses. In calculating the time response, direct integration scheme is used because it can be applied directly to the reduced model. Especially for the non proportional damping matrix, the transformation matrices defined in the displacement space are used to reduce the system. The efficiency and the effectiveness of the present method are demonstrated through the numerical examples.

• Journal of Korea Foundry Society
• /
• v.28 no.2
• /
• pp.69-73
• /
• 2008

In the present study, microstructural evolution and mechanical properties of Ti-Fe-Sn ultrafine eutectic alloys have been investigated. Ultrafine eutectic microstructure consisting of a mixture of ${\beta}$-Ti solid solution and TiFe intermetallic compound homogeneously formed in $(Ti_{70.5}Fe_{29.5})_{100-x}Sn_x$ alloys with x = 0, 1 and 3. Addition of Sn is effective to modify the eutectic colony into the spherical shape with decreasing the lamellar spacing and colony size. This results in enhancing the macroscopic plasticity up to 3.1% of the Ti-Fe-Sn ultrafine eutectic alloys.

• 연구논문집
• /
• s.33
• /
• pp.123-135
• /
• 2003

Using the residence time calculated by computer simulation for temperature and gas velocity distribution in CVC reactor, the kinetics on the formation of $TiO_2$ nano powder was analyzed for coagulation process, After abrupt increase of particle size at initial growth stage (< 0.2 $\mus$ ), the particle grew in proportion of cubic root to time. The numerically calculated particle sizes well agreed with the experimental results. However, the coarse rutile $TiO_2$ powders having the particle size of over 40 nm were formed on the surface of quratz rod in the reactor. it is thought that the fine anatase particles condensed on quratz rod were sintered in a heated CVC reactor to grow and transform to coarse rutile phase, and the critical size for phase transformation anstase-to-rutile was around 25 nm tn this study.

• Korean Journal of Materials Research
• /
• v.7 no.7
• /
• pp.571-575
• /
• 1997

급냉온도에 따른 전기 저항 측정으로 Cu-17, 25Zn-15AI 및 Cu-17.25Zn-15AI-1Ag형상기억합금의 열처리에 의한 마르텐사이트 변태온도의 영향을 연구하였다. DSC 측정으로 고온 모상에서의 상전이 온도롸 종류를 구별하였고 XRD측정으로 구조 변화를 연구하였다. 그리고 열처리에 의한 온도 변화의 원인을 연구하였17.25Zn-15AI 합금에서 고온 모상의 규칙-불규칙 전이온도인 $T_{2}$, $T_{L21}$은 각각 809K와 610K였다. CuZnAI의 경우 $T_{2}$근방에서의 급냉은 마르텐사이트 변태온도를 높이지만 $T_{L21}$ 근방에서의 급냉은 마르텐사이트 변태온도를 낮춘다. 실험결과 열처리에 따른 상전이온도 변화의 원인은 석출물의 형성이라기 보다는 급냉전의 모상의 구조에 가장 큰 영향을 받는다.받는다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.408-408
• /
• 2008

EL(electro luminescent)은 밝기가 균일하고, 대면적화가 용이하고 플렉시블화가 가능한 소자로 활용될 수 있다는 장점을 가지고 있다. 특히 최근에는 휴대폰의 슬림화추세로 key pad용 백라이트 광원으로 빌리 사용되고 있다. EL 에 사용되는 형광체 파우더인 ZnS는 여러 종류의 dopant를 첨가 합성하여 여러 가지 컬러를 구현할 수 있다. ZnS모체는 적절한 온도조건에서 열처리하면, 첨가된 dopant가 아닌 자체결함에 기인하는 발광이 나타난다. 따라서 본 연구에서는 ZnS 모체파우더에 인위적으로 열처리 온도를 변화시켜가면서, 그에 따른 상변화를 관찰하였다. 또한 상변화로 따른 PL특성을 관찰하였다.