• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.165-172
• /
• 2013

The habitats characteristics of Rhododendron micranthum Turcz. were investigated to compile basic data for conservation and restoration. Natural habitats were located at altitudes of 100-500 m with inclinations of $10-35^{\circ}$. Rhododendron micranthum population was classified into Pinus densiflora dominant population. In the study sites, soil organic matter, total nitrogen, available phosphate, exchangeable potassium, exchangeable sodium, exchangeable calcium, exchangeable magnesium, cation exchange capacity and soil pH were 4.10-8.64%, 0.18-0.46%, 8.69-26.70 $mgkg^{-1}$, 0.10-0.23 $cmol^+kg^{-1}$, 0.06-0.10 $cmol^+kg^{-1}$, 0.85-4.10 $cmol^+kg^{-1}$, 0.24-0.64 $cmol^+kg^{-1}$, 12.76-20.90 $cmol^+kg^{-1}$, 4.34-5.15. Rooting rate is too low, cutting propagation, breeding methods are not good. Also, this study was investigated seed germination of R. micranthum depends on soaking treatment. R. micranthum was soaked with tap water for four days, the average values of germination day were represented of 70%/1 week.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.151-156
• /
• 2011

Seeds of Xanthoceras sorbifolia Bunge were collected from two plantations and two superior trees in Inner Mongolia: and one plantation and one superior tree in Liaoning, China in late August, 2011. Yellowhorn or goldenhorn is an important tree species, from the aspects of source of edible oil and biodiesel and pioneering capacity of degraded and desert land. Characteristics investigated were seed length, width, and weight: weight and volume of 1,000 seeds: and weight and volume of one-liter seeds. The seeds of Qingsonglingxiang No. 1, growing alone in an open space, showed the highest values in seed length (16.08 mm), width (14.48 mm) and weight (1.40 g), while those of Tree No. 160 in Ar Khorqin Banner were the lowest ones: that is, 11.48mm for length, 11.81 mm for width, and 0.73 g for weight, respectively. Traits of seeds varied quite much between trees and among areas; for example, Tree No. 38 and No. 160 produced quite different seeds in several traits, although they are adjacent to each other in the same farm. Weight of 1,000 seeds varied from 718.0 g to 1,010.1 g and volume from 0.76 L to 1.52 L. Weight of one-liter seeds were 522.3 g to 688.2 g, while the number of seeds were 603 to 935. Seeds which were soaked in the water at $4^{\circ}C$ for 2 days showed the highest germination rate (89%) in a 30-day test, which was about 10% to 40% higher than those of non-treatment and dipping treatment at $36^{\circ}C$ followed by keeping under room temperature for 2 days. 81% of seeds in the wet sand at room temperature germinated, while 23% of seeds deprived of seed coat germinated. It is necessary to understand seed traits to select superior clones or provenances for the increased, unfluctuating production of seed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.122-127
• /
• 1983

Germination and seedling emergence of 40 barley cultivars and lines having been bred in Korea were studied under different water and salt stress conditions containing different sucrose and KC1 concentration in laboratory at Suweon. This study revealed that the barley cultivars and lines differed markedly in their emergence rate index(ERI), total stand(TS), coleoptile length, seedling height, top and root weight. Those characters of the most cultivars were progressively reduced as water and salt stress increased. Jogangbori, Dongbori 1, SB 77460 and SB 77415 were less sensitive to both stress and will be useful for breeding sources. ERI was highly correlated with TS, coleoptile length and seedling height. ERI and TS between two different solutions were correlated each other, and this study indicated that for screening the varieties or lines tolerant to water and salt stress, both ways were available and should be screened genetic materials with a good germination and emergence rate in I stress conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.18-18
• /
• 2022

Barley has been used for the production of malt in the brewing industry. Malting is the process of preparing barley through partial germination. Malt extract is the most important quality parameter for malt quality. The grain and malt quality parameters of ten Korean malting barley varieties were studied. Malts was prepared using Phoeix automated micro malting system(Phoenix Bio, Australia). Quality analysis of Barley and malt was determined according to European brewery convention(EBC, 1998) and American society of brewing chemists(ASBC, 1997) method. And the hordeins of barley and malt were extracted with 50% isopropyl alcohol(IPA, 2-propanol) of 1% dithiothreitol(DTT). The analysis of hordeins was carried out by ultra-performance liquid chromatography(UPLC). The mean values of 1000-grains weight, assortment rate, protein content, starch content, beta-glucan content, husk rate, germination energy, germination capacity and water sensitivity of grain were 45.8g, 86.8%, 11.9%, 58.0%, 3.8%, 14.0%, 96.2%, 97.2%, 10.0%, respectively. The mean values of protein content, friability, diastatic power, extract, soluble protein, Kolbach index, beta-glucan of malt and wort were 11.3%, 87.6%, 201WK(Windish Kolbach), 79.3%, 4.6%, 41%, 85mg/L, respectively. UPLC analysis of grain and malt hordeins revealed that the amount of hordeins significantly degraded during malting. Also, we could successfully be used to compare hordein polypeptide patterns with malt quality.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.199-206
• /
• 2012

This study was conducted in a glasshouse to examine the possibility of producing tomato plug seedlings in a newly-developed inert phenolic foam medium. Plug seedlings of 'Madison' tomato were grown in four pellet type media, Grodan rockwool, UR rockwool, phenolic foam LC, and phenolic foam LC-lite. Seed germination was checked for 7 days. Seedling growth was measured at 19 days after sowing. The greatest germination was obtained in the phenolic foam LC and phenolic foam LC-lite. Plant height, hypocotyl length, leaf area, dry weight, and fresh weight were significantly greater in the rockwool medium than those in the other media. However, the T/R ratio and stem diameter were the greatest in the phenolic foam LC than those in the other media. The total porosity and container capacity of the phenolic foam LC was higher than in the other media. The air space (%) was lowest in the phenolic foam LC. Overall, the phenolic foam LC and phenolic foam LC-lite produced seedlings with similar growth as the rockwool. These results suggested that both phenolic foam LC and phenolic foam LC-lite have potential to be used in production of plug seedlings of 'Madison' tomato.

• Weed & Turfgrass Science
• /
• v.3 no.1
• /
• pp.19-28
• /
• 2014

Research was initiated in greenhouse to investigate effects of polymer, calcium, perlite and chitosan on the growth of Kentucky bluegrass (KB). A total of 24 treatment combinations were used in the study. Treatments were made of water-swelling polymer (WSP), calcium, perlite, and chitosan in soil organic amendment (SOA). Significant differences were observed in germination rate, turfgrass coverage, turfgrass density and top growth among treatments. Germination rate, density and plant height varied with time after seeding. A proper mix of WSP is considered to be lower than 3% for turfgrass coverage and density. Regarding survival capability and top growth, however, it was good under 6%. Overall KB growth was more influenced by calcium and perlite than chitosan. Calcium and perlite were the most effective elements for early survival capacity and turfgrass density, respectively. But no effect was found by chitosan. Top growth increased with three elements, being perlite > calcium > chitosan. The chitosan was effective in early germination, but there was no effect on top growth until 3 weeks, when compared with others. A further study is needed for investigating the effect of these materials on the growth characteristics in mixtures of sand and SOA before a field application.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.143-151
• /
• 2018

The quality and physicochemical characteristics of the soybean flours after germination and roasting were evaluated to partly fulfill the purpose of establishing quality standards of soybean flours for each of their applications. Moisture content of roasted soybean flours decreased significantly based on the roasting conditions, and crude ash, protein, and fat content increased. Water binding capacity increases with an increase in roasting temperature and time; however, water solubility index and swelling power decreased. The lightness of roasted soybean flour decreased significantly, and its redness and yellowness increased in intensity. Phenolic compounds and radical scavenging activity of roasted soybean flour increased with an increase in roasting temperature and time. 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical scavenging activity of roasted soybean flour without and with germination was 380.88-537.32 and 419.34-587.99 mg TE/100 g, respectively. Consequently, it is necessary to set quality standards for each application, considering the quality and antioxidant properties of roasted soybean flours.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.877-885
• /
• 1993

Three types of solar grain dryers, namely , the solar grain bin dryer, the solar greenhouse rotary drum dryer and small scale solar green house tray dryer, have been tested. The results showed that each type of solar grain dryer has its feature. These solar drying units have three main advantages : (1) Required commercial energy to remove 1Kg moist from rough rice is only 5.3% to 15.8% of the energy consumed by common heated dryer : 2) The area of solar drying system is only about 10% of the area of the sunny ground to give equal drying capacity ; (3) There are good drying quality in the moisture uniform , germination percentage, and grain color.

• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.18-23
• /
• 2018

The purpose of this study was to develop wood pots for create Optimum environment of plant growth using unused wood. to prove this, we examined the effects of cycle of water supply and nutrient concentration in wood pots on plant germination rate and growth factors (leaf number, stem diameter and length). The results are as follows. 1) The growth rate was higher at once of 2 days watering period. This suggests that the growth of the plants was better than that of the less water because the larch pots itself has the water retention capacity inside. 2) Germination rate and growth rate were better than other treatment groups when the concentration of nutrient solution was 0.5%. 3) Nitrogen, available phosphoric acid, and potassium showed higher contents than the nutrient - treated soil at 0.5% concentration of nutrient solution. This indicates that the nutrient solution absorbed from the larch affected the soil and plant growth in the inside.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.37-45
• /
• 2021

This study was conducted to evaluate the growth characteristics, phenolic concentration and antioxidant capacity of safflower (Carthamus tinctorius L.) and amaranth (Amaranthus spp.) sprout and investigate the possibility of using super absorbent polymer (SAP) as a medium in hydroponic cultivation in a plant factory. The control was used a commercial sprout cultivation tool (19 × 14 × 9 cm, W × D × L), and a treatment (SAP) was added on the cultivation tool to compare the effect of SAP. Safflower sprouts were immersed in a distilled water at 30 ℃ for 5 hours, and then grown in a plant growth chamber. The temperature and relative humidity were maintained at 25 ± 1℃ and 70 ± 4%, respectively. The light condition was maintained at 35 ± 6 μmol·m-2·s-1 (12h). Amaranth sprouts were grown in a plant growth chamber maintained with temperature of 25 ± 2℃, relative humidity of 70 ± 5% and light condition of 188 ± 10 μmol·m-2·s-1 (16h). A physical and chemical characteristic of SAP, and a germination rate, growth characteristics and secondary metabolites were analyzed in both safflower and amaranth. There was no significant effect on SAP in a germination rate, growth and secondary metabolites of safflower compared to the control, whereas amaranth grown under SAP was higher in germination rate, dry weight, phenolic concentration, and antioxidant capacity compared to the control. As a result, this study was suggested that cultivation of sprouts using SAP would be possible in a plant factory, and further studies on SAP on plant physiological response are required.