• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.3
• /
• pp.45-54
• /
• 2017

With rapid urbanization and reckless urban development in the 21st century, the urban environment has gradually gotten worse, and urban heat island effect has been dramatically intensified. Thus, the importance of street greenery that can mitigate the urban heat island effect has further been highlighted. In this regard, this study was aimed at selecting suitable plant species for street greenery to reduce the urban heat island effect. Towards this end, five roads located in Seocho-gu, Seoul were selected as study sites, and plant species composition and difference of surface temperature were compared and analyzed in relation to the light transmittance. The street with the greatest temperature difference is Bangbae-ro(Platanus occidentalis). On the other hand, the road with the lowest temperature difference is Nambusunhwan-doro(Metasequoia Glyptostroboides). The effect of temperature reduction was found to be associated with light transmittance.Bangbae-ro(Platanus occidentalis) with the lowest light transmittance showed the highest temperature difference and Nambusunhwan-doro(Metasequoia Glyptostroboides) with the highest light transmittance showed the lowest temperature difference. It is analyzed that there are most differences in temperature when the amount of lights coming in between the crown is small. The temperature reduction effect can be obtained by planting deciduous broad-leaved trees. Also species with dense crown and broad width of crown will be able to maximize the effect of temperature reduction. In future studies, it will be necessary to expand the other species of trees in the street, and analyze the germicidal trees and shrubs as well as the differences in the packaging materials.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2016

Disinfection of microorganisms using UV light is widely used in the field of water supply and wastewater treatment plant, In spite of high germicidal effect and relatively clean by-product, UV disinfection has fundamental defeat that is accumulation of fouling materials at the interface of water and lamp sleeve. Non-contact type of UV photoreactor which can avoid this fouling generation was developed and the experimental performance evaluation of the system was carried out in this study. Log inactivation rate of E. coli was selected as a disinfection index. The concentration of E. coli of second clarifier effluent was $8.2{\times}10^1-8.2{\times}10^3$ colony per mL and was well inactivated by the non-contact type of UV photoreactor. Under the UV intensity condition of $2.1-2.5mW/cm^2$, E. coli removal rate was observed in the range of 54 - 95% when the HRT was increased from 10 to 52 seconds. Experimental results showed that log inactivation of E. coli was proportional to UV dosage and $200mJ/cm^2$ of UV dose is expected for the 2.0 log inactivation of E. coli from the second clarifier effluent. Between the two parameters of UV intensity and contact time which are consist of UV dose, UV intensity was 4 times more effective than contact time.

• Analytical Science and Technology
• /
• v.30 no.1
• /
• pp.26-31
• /
• 2017

Background and purpose: This study was carried out to learn more about the potential prophylactic or antibacterial activity of the plant Acalypha indica against selective pathogenic bacteria. Experimental: The test organisms were Sarcina lutea IFO 3232, Bacillus subtilis IFO 3026, Pseudomonas denitrificans, Escherichia coli IFO 3007, Klebsiella pneumoniae ATTC 10031, Xanthomonas campestris IAM 1671, and Proteus vulgaris. Leaf, stem, and bud powder of Acalypha indica were dissolved in various solvents, and the extracts were tested for antimicrobial activity through the disc diffusion method. GC-MS profiling was performed to characterize active chemical compounds in the essential oil of Acalypha indica. Results: The ethanol extract showed the highest activity against all bacteria, while the petroleum ether extract yielded the highest zone of inhibition against Proteus vulgaris ($11.83{\pm}1.75mm$). The minimum inhibitory concentration (MIC) of the ethyl acetate extract against Bacillus subtilis was 16 µg/mL. Phytochemical screening by GC-MS revealed a total of 12 bioactive compounds. Conclusion: Extracts of Acalypha indica may be useful in formulating and synthesizing new antibacterial drugs.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.226-237
• /
• 2020

As the number of reported COVID-19 cases rises around the world, regions affected by the virus are taking serious measures to contain its spread. Face shields are one of the highest-need personal protective equipment (PPE) during COVID-19 pandemic. Beyond traditional face masks, as known cases of the coronavirus soar, currently there is a significant shortage of face shields around the world. In response, the protective face shields were designed and fabricated with open-source 3D modelling software and 3D printing technology, respectively. Our face shield consisted of two parts only; a reusable 3D printed headband and a visor made of transparent plastic sheet, as barrier. The resulting 3D printed face shields are affordable, lightweight, one-size-fits-most and ready-to-wear with minimal assemblies, and go on easily over glass, goggle and face mask. To ensure being donated to the healthcare professionals without risk infected by any pathogens, the 3D printed face shields were successfully be disinfected with ultraviolet germicidal irradiation (UVGI dosage of 1000 mJ/cm²) and 70% alcohol. For routine disinfection a UVGI chamber was designed and optimized to provide uniform UV-C illumination with an appreciated fluence for complete decontamination. More than 1,000 face shields were produced already and donated to the special hospitals for COVID-19 patients, quarantines, government and medical agencies in Ethiopia as well as in East-African countries. With certainty, our intention goes beyond the hospitals and other first responders, but not limited for all those who have to stay in the service or be in contact with many other people in the time of COVID-19 pandemic.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.68-73
• /
• 2024

In this study, the praseodymium-doped yttrium phosphate (YPO₄:Pr³⁺) powder, which is well known for its high luminescent efficiency, and long life in the UV range, was synthesized with various content ratios of Pr₆O₁₁ and calcination temperature. Crystal structure and luminescent properties of various phosphor powders based on different concentrations and calcination conditions were characterized by XRD (X-Ray Diffraction) and PL (photoluminescence) spectrometers. From the XRD analysis, the structure of YPO₄:Pr³⁺ which is calcinated at 1,200℃ was stable tetragonal phase and crystal size was calculated about 25 nm by Scherrer equation. PL emission of YPO₄:Pr³⁺ with a different content ratio of Pr₆O₁₁ by excitation λ_exc=250 nm shows that 0.75 mol% phosphor powder has maximum PL intensity and PL decreases with the increase of the ratio of Pr₆O₁₁ up to 1.25 mol% which is caused by changes of crystallinity of phosphor powders. With increasing dopant ratio, photo-luminescence Emission decreases due to Concentration quenching, which is commonly observed in phosphors. Currently, 0.75 mol% is considered the optimal doping concentration. A hybrid ultraviolet-emitting device incorporating YPO₄:Pr³⁺ fluorescent material with plasma discharge was fabricated to enhance UV germicidal effects while minimizing ozone generation. UV emission from the plasma discharge device was shown at about 200 nm and 350 nm which caused additional emission of the regions of 250 nm, 315 nm, and 370 nm from the YPO₄:Pr³⁺ phosphor.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.2
• /
• pp.111-115
• /
• 2007

It is inevitable to use germicidal agents like parabens, imidazolidinyl urea, phenoxyethanol and chlorphenesin to preserve the cosmetics. Although effective in reducing microblological contamination, chemical preservatives are irritative, allergenic and even toxic to human skin. So it is needed to decrease or eliminate usage of preservatives in cosmetic products Glycerin, butylene glycol (BG), prorylene glycol (PG), and dipropylene glycol (DPG) are widely used in cosmetics as skin conditioning agent or solvents. At high concentrations, they have antimicrobial activities, but deteriorate product quality like sensory feeling or safety. The purpose of study is to evaluate the effects of polyols on antimicrobial and preservative efficacy and confirm whether using adjusted polyols can decrease the contents of preservatives without deterioration of the quality of cosmetics. Effects of common polyols on antimicrobial activities of general preservatives were measured. BG and PG significantly (p < 0.05) increased activities of preservatives, but glycerin influenced little. It was inferred from the regression analysis of the results with S. aureus that adding 1% of PG increased activities of preservatives up to $2.1{\sim}8.4 %$ and BG improved activities of preservatives up to $1.8{\sim}8.4 %$. The challenge test results for oil in water lotions and creams showed that BG and PG improved the efficacy of preservative systems up to 40 % at a range of $5.5{\sim}9.9 %$, but glycerin had little effect on it. The measured rates of improvement were analogous to the inferences from regression analysis. It can be concluded that is possible to reduce total chemical preservatives up to 40 %, consequently improve the safety and sensory quality of cosmetics with the precision control of polyols. Added to that, using this paradigm, low preservative contents, praraben-free system, and even preservative-free systems can be expected in the near future.

• Biomedical Science Letters
• /
• v.10 no.3
• /
• pp.299-303
• /
• 2004

The number of acute drug intoxication who visiting to emergency department which is located near urban and rural area concomitantly is inclined to increase slightly, The purpose of this study was the investigation of methods and strategies of management of acute drug intoxication in emergency department Clinical trials were done on 92 cases of acute drug intoxication visiting to Emergency Department of Chungnam National University Hospital during 4 months from April to July 2003. 1. The total number of acute drug intoxication during this period was 92 patients, which presented 0.95％ of all the emergency department visiting patients during the study. The intentional ingestions were observed in 84 cases (91.3％). 2. The maximal point of age distribution was 4th decade. The number of that was 21 cases (22.8％). 3. The number of patients who had ingested benzodiazepines and doxylamine succinates was 26 cases (28.2％), organophosphorus was 20 (21.7％), paraquat was 10 (10.8％), others were 36 (39.3％). 4. Five kinds of po1ydrug ingestion was observed in 3 cases, four kinds was observed in 3, three kinds was observed in 5 and co-ingestion of alcohol was observed in 28 cases (30.4％). 5. The mortality was occurred in 4 cases, 2 of them were caused by paraquat, 1 of them was caused by organophosphorus (OP), 1 of them was caused by acetic acid. 6. The gastric larvage as a mean of treatment modality was done in 57 cases (61.9％). The use of activated charcoal was done in 8 (8.69％). The maintenance of tracheal intubation was done in 6 (6.52％). 7. The mean observational period in emergency department was 8 hours 42 minutes in benzodiazepine and doxylamine succinate group, 21 hours 46 minutes in OP, 20 hours 39 minutes in other germicidal except OP, 23 hours 9 minutes in paraquat group. Without a drug information and intoxication center in Korea, We should minimize the exhaustion of medical resources by establishment of determinant criteria which can be seen in relatively less-complicated cases of acute drug intoxication. Thus, we should consider the introduction of simple toxicology treatment protocol and toxicologic observation unit in emergency department as possible means to reduce economical and social burdens.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.914-919
• /
• 1998

This study was conducted to evaluate the purification efficacy by filter and ultra violet (UV) irradiation against inlet and outlet seawater of the land based fish farm. Purification efficacies for inlet seawater (50$\ell$/min) has been examined with filter of 60$\mu$m pore size and UV irradiation at an average dose 0.5 mWS/$cm^2$ for 5 months. For outlet seawater filter of 90 $\mu$m pore size only was used. Temperature, salinity, pH, $NO_3-N,\;NO_2-N,\;NH_4-N,\;PO_4-P$, DO and COD of inlet and outlet seawater in the system were not influenced. However, the removing rate of suspended solid and turbidity of inlet seawater were appeared to be $48.7\~65.6\%$ (average $51.9\%$) and $33/3\~42/5\%$ (average $34.8\%$) after passing through screen filter respectively. Also, germicidal efficiency to the total bacteris and Vibrio species were $16.7\~20.2\%$ (average $19.2\%$) $20.0\~21.9\%$ (average $20.9\%$) respectively after passing through UV irradiation. After passing through drum filter of 90$\mu$m pore size, suspended solid and turbidity of outlet seawater were appeared to be $42.7\~52.6\%$ (average $46.9\%$), $27.7\~29.9\%$ (average $28.3\%$), respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.558-566
• /
• 2017

In this study, we developed an electron-emission OH radical generator for waste water treatment. The stability of the circuitry was ensured by implementing stable pulse waves with a MOSFET and reducing the momentary current rise. The OH radical generator uses a high-voltage and low-current discharger. The performance of the device was evaluated experimentally, which showed that it is possible to produce a stable and uniform pulse waveform for the drain current of the power MOSFET, which is connected to the input side of an AC multiplying converter through negative feedback circuitry with CR-snubber architecture. It was also possible to reduce the excitation current of the converter and improve the stability of the oscillation circuit. In addition, the generator can generate hydroxyl radicals stably. The bactericidal activities were also evaluated, and the germicidal power for E. coli, S. aureus, and S. flexneriwas improved by 99.9% or more after 60 minutes.