• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.7-11
• /
• 2001

Almost every die for automobiles must be corrected or remodeled for minor geometrical changes or fur better hardness characteristics by an arc welding process. Although many other kinds of arc welding processes have been automated with robots, the molten metal deposition process for die remodeling still depends entirely on experienced welders. In this study, a database for bead shapes with respect to welding parameters is constructed through experiments to automate molten metal deposition by the arc welding process. Changes in the welding parameters for inclined base metal are studied to consider the effect of die geometries on the welding process.

• 한국의학물리학회지:의학물리
• /
• 제15권2호
• /
• pp.84-93
• /
• 2004

정위적 방사선수술(stereotactic radiosurgery, SRS)은 정위적 기구를 이용해 환자를 고정시킨 후 한번에 고선량의 방사선을 병변에 조사하는 방사선 치료법이다. 일반적인 방사선 치료와 달리 단 한번의 조사로 고선량의 방사선이 환자에게 주어지므로 정확한 수술계획의 수립이 필요하다. 현재, 수술계획은 사람이 직접 시행착오를 거듭하며 수립되고 있다. 이로 인해 계획의 재연성과 신뢰성에 문제가 재기되고 있으며, 이를 해결하고자 컴퓨터를 활용한 수술계획 최적화 방법들이 제안되어 왔다. 그러나 기존의 방법들은 최종적인 수출계획을 얻을 때까지 많은 시간이 필요하고 사용되는 수학적 알고리듬의 한계로 국소적 최적해를 최종해로 산출해 낼 위험성을 가지고 있다. 이를 해결하기 위해 이상표적모델을 활용한 정위적 방사선수술계획 최적화 방법을 연구하였다. 병소의 다양한 모양을 근사시킬 이상표적모델을 구형과 원통형, 원뿔형, 타원체의 4종류 가정하였다. 회전중심점(isocenter)을 여러 개 사용하여 이상표적모델을 50％ 등선량 내에 포함시키고, 이 조건을 만족하는 경우의 회전중심점의 위치, 콜리메이터 크기를 데이터베이스화 하였다. 병소가 주어질 경우 기하학적 비교를 통해 병소의 모양을 가장 잘 나타낼 수 있는 이상표적모델, 또는 이상표적모델의 조합을 결정한 후 병소를 근사화하는 과정을 개발하였다. 이후 각 이상표적모델에 대해 데이터베이스에 구축되어 있는 최적변수들을 찾아 회전중심점을 배치시키고 실제 병소에 맞게 최종적인 수정을 통해 최적화 과정을 마치도록 하였다. 이 과정을 가상 표적에 대해 수행한 결과 뛰어난 결과를 보이진 않았으나 회전중심점에 대한 간단한 변화만으로 만족할 만한 결과를 나타내었다. 이는 직접적인 수술에 사용될 수는 없을지라도 수술계획을 함에 있어 최적화 과정의 시작점(Starting Point)으로 받아들이기에 만족할 만한 결과이다.

• Structural Engineering and Mechanics
• /
• 제28권1호
• /
• pp.107-127
• /
• 2008

Wind turbine blades are increasing in magnitude without a proportional increase of stiffness for which reason geometrical and inertial nonlinearities become increasingly important. Often these effects are analysed using a nonlinear truncated expansion in undamped fixed base mode shapes of a blade, modelling geometrical and inertial nonlinear couplings in the fundamental flap and edge direction. The purpose of this article is to examine the applicability of such a reduced-degree-of-freedom model in predicting the nonlinear response and stability of a blade by comparison to a full model based on a nonlinear co-rotating FE formulation. By use of the reduced-degree-of-freedom model it is shown that under strong resonance excitation of the fundamental flap or edge modes, significant energy is transferred to higher modes due to parametric or nonlinear coupling terms, which influence the response and stability conditions. It is demonstrated that the response predicted by such models in some cases becomes instable or chaotic. However, as a consequence of the energy flow the stability is increased and the tendency of chaotic vibrations is reduced as the number of modes are increased. The FE model representing the case of infinitely many included modes, is shown to predict stable and ordered response for all considered parameters. Further, the analysis shows that the reduced-degree-of-freedom model of relatively low order overestimates the response near resonance peaks, which is a consequence of the small number of included modes. The qualitative erratic response and stability prediction of the reduced order models take place at frequencies slightly above normal operation. However, for normal operation of the wind turbine without resonance excitation 4 modes in the reduced-degree-of-freedom model perform acceptable.

• 복식문화연구
• /
• 제6권2호
• /
• pp.109-126
• /
• 1998

The purpose of this study was to analyze the expressional characteristics of the machine aesthetics in the fashion design. First, this study was started from analyzing mechanical beauty represented on the early 20th century art style. Machine aesthetics has influenced on the art and fashion design from modern to now. Futurism was grounded in the complete renewal of human sensibility brought about by the great discoveries of science. Especially, Russia avant-garde was inspired by the Futurism, that is Rayonism, Constructivism, Suprematism. Kasimir Malevich moved on immediately to purely abstract paintings of which the first was a black square on a white canvas. He had begun the art he called 'Suprematism'. Malevich's geometry was funded on the straight line, the supremely elemental form which symbolized man's ascendancy over the chaos of nature. The square was the basic suprematist element and was a repudiation of the world of appearances, and of past art. He repudiated any marriage of convenience between the artist and the engineer. Vladimir Tatlin made some of the most revolutionary works of modern art, these were the first works to be called 'construction'. Constructivists believed that the essential conditions of the machine and the consciousness of man inevitably create an aesthetic which would reflect their time. They eulogized simple shapes. That believed that buildings and objects should be freed from the ornamental excrescences and the accumulated barnacles of past art. Consequently, under the theoretical background, the result is as follows. First, The functional formativeness of machine aesthetics was expressed as a geometrical silhouette, construction line, non-ornamental construction, simple color in the 20th century design. Second, The mechanical formativeness of machine aesthetics was expressed as a construction of new material-iron, aluminium, plastic, glass-, geometrical form of material in he 20th century design. That is, machine beauty has more concerned with the expressional ideology of the art style and the formativeness of fashion design by silhouette, construction line, material, form.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.315-324
• /
• 2012

본 연구는 가연성 기체로서 에틸렌-공기 혼합물로 채워져 있는 관에서 장애물과 굽은 관에 의한 지형적 효과에 따라 변화하는 충격파와 화염의 상호 작용, 화염 가속, 연소폭발천이 현상을 수치적으로 살펴보았다. 여기서 사용되는 모델은 지배방정식으로 Navier-Stokes 방정식과 경계조건 처리 방법으로 ghost fluid 기법을 사용하였으며 지형적 영향을 달리한 여러 모델링을 통하여 화염과 강한 충격파의 충돌에 의한 열점 생성과 화염 전파의 지연 혹은 가속 현상을 확인하였다. 추가적으로 평균 화학적 에너지 발생률이 대략 20 MJ/($g{\bullet}s$)에서 폭굉으로 천이한다는 사실을 확인하였다. 그리고 동일 위치 열점 생성에도 불구하고 폭굉의 발생 시기가 반응물의 부재와 화염면 전방의 온도와 압력 차에 의해 지연될 수 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.32-37
• /
• 2009

In shipyard, plate forming is widely used to form the ship hull plate in various shapes. Line heating method by using a flame torch is one of the major shipbuilding processes carried out by skilled workers. Since the forming characteristics depend upon their experiences in manual forming, there are much variations between products and difficulties in communication between engineers and workers. Hence, it needs to develop an automatic forming system which can not only reduce the working time and rework costs but also improve the working environment and hull forming productivity. One of the final goals of plate forming automation is to form a target shape from the initial plate automatically. For automated plate forming, it is required to determine where and how to heat on the plate. To realize this procedure, the inverse problem should be first solved and the effect of curvature shape formed at the heating path should be investigated. In this study, the inverse problem was solved by geometrical approach using the relationship between bending angle and radius of curvature of the curved shape. In addition, experiments of two-dimensional plate forming were performed with the distance-based method considering the curved bending with curvature. The result of the formed shape agreed considerably well with the target shape.

• 한국지능시스템학회논문지
• /
• 제14권4호
• /
• pp.506-511
• /
• 2004

최근 몇 년 동안 사람들의 고유한 생리적인 특징을 이용한 생체 인식은 새로운 학문으로서 연구 및 개발이 활발하게 진행되고 있다. 지금까지, 오로지 지문 인식만이 다른 생체 인식에 비해 확인과 식별 시스템들이 더 정교하고, 비싼 취득 인터페이스들과 인식 과정을 필요로 하기 때문에 온라인 보안 검사를 위하여 한정된 성공을 보았다. Hand-Geometry는 생체 인식의 확인 그리고 취득의 편리 때문에 식별 그리고 확인을 위하여 사용되고 있다. 그러므로, 본 논문은 이러한 특징을 가지는 손의 기하학적인 Hand-Geometry 인식 시스템을 제안하고자 한다. 해부학적인 관점에서, 인간의 손은 길이, 폭, 두께, 기하학적인 모양, 손바닥의 모양, 그리고 손가락들의 기하학적인 모양까지 특성으로 나타내어질 수 있다. 본 논문에서 제안한 Hand-Geometry 인식 시스템은 30개의 특징 데이터를 가진다. 그러나 특징 데이터 가운데 사용자의 Hand-Geometry의 특징에 따라 길이 데이터가 변하는 것을 실험적으로 발견하였다. 따라서 이와 같은 가변적인 길이 데이터를 안정화시키기 위하여 본 논문에서는 길이 데이터의 기준점을 손톱 아래 점으로 정하고, GA를 적용하여 보다 안정된 특징점을 추출하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권3호
• /
• pp.247-254
• /
• 2006

Biometrics are getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry can be used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. It could also be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. This system presents verification results based on hand measurements of 20 individuals. The verification process has been tested on a size of $320{\times}240$ image, and result of the verification process have hit rate of 95% and FAR of 0.020.

• 한국의학물리학회지:의학물리
• /
• 제30권1호
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• 한국추진공학회지
• /
• 제25권4호
• /
• pp.71-77
• /
• 2021

가스터빈 블레이드를 고온의 주유동으로부터 보호하기 위해 다양한 냉각 기법이 연구되었고, 팬 형상 홀을 포함한 다양한 막냉각 홀 형상에 대해서도 연구가 수행되어왔다. 하지만, 소형 가스터빈에 대한 수요가 증가함에 따라 얇은 벽에 적용할 수 있는 막냉각 홀에 대한 연구가 필요하다. 이에 따라 본 연구에서는 수치해석을 통하여 분사율 1과 2에서 팬 형상 홀의 형상 변수의 영향을 연구하였다. 또한, 원형부 길이와 전방향 및 횡방향 확장각, 세 가지 변수에 대하여 최적화를 수행하였다. 각 분사율에서 최적화된 두 형상은 유사한 형상 변수와 냉각 성능을 갖는 것으로 나타났다.