• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.199-203
• /
• 2003

In this study plastic optical fibers (POFs) were considered as light-transmitting media and substrates for the potential use in photocatalytic environmental purification system. After the characteristics of POFs in terms of light transmittance and absorption were determined at the beginning, the further investigation was performed through the photocatalytic degradation of trichloroethylene (TCE), iso-propanol and etc. with TiO$_2$-coated optical fiber reactor systems (POFR). It is concluded that the use of POFs is preferred to quartz optical fibers (QOFs) since the advantages such as ease of handling, lower cost, relatively reasonable light attenuation at the wavelength of near 400nm can be obtained. Various geometrical reactor shapes have been constructed and applied for the last one and half years. For the use of POF in water phase treatment, however, more detailed scientific and engineering aspects should be envisaged. This case requires a suitable mixture to obtain more stable and innocuous immobilization of photocatalyst on POF. To overcome this disadvantage, metal-organic chemical vapor deposition (MOCVD) was conducted in a fluidized bed to deposit thin films of titania on glass and alumina beads. Those can be used as photocatalysis for the removal of pollutants especially in liquid phases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.98-115
• /
• 2017

This study categorizes the formative aspects of dress and their implications according to the extent of revealing or concealing corporeality based on body perceptions. By considering the notion of dress as bodily practice to be a theoretical and methodological framework, this study combines a literature survey and case analysis to analyze and classify the forms of women's dress since the 1920s when contemporary fashion took hold. As examined in this study, the typology of dress was categorized as body-consciousness, deformation, transformation, and formlessness. Body-consciousness that is achieved through tailoring, bias cutting, and stretchy fabric displays corporeality focusing on the structure and function of the body as an internalized corset. Deformations in dress are categorized into two different subcategories. One is the expansion or reduction of bodily features based on the vertical or horizontal grids of the body, which visualizes the anachronistic restraint of the body through an innerwear as outerwear strategy. The other is exaggerations of the bodily features irrelevant to the grid, which break from the limitations and constraints of the body as well as traditional notions of the body. Transformations of the body refer to as follows. First, the deconstruction and restructuring of the body that deconstruct the stereotypes in garment construction. Second, the abstraction of the body that emphasizes the geometrical and architectural shapes. Third, transformable designs which pursue the expansion and multiplicity of function. Formlessness in dress denies the perception of three-dimensionality of the body through the planarization of the body.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.83-94
• /
• 2010

Conventionally, ornament has developed around linear thinking based on Euclidean geometry, and been explained as simple and lucid natural Euclidean geometrical phenomena. The modular arrangement with vertical, horizontal and diagonal grids has been an organizing principle of classical ornament, but in digital era ornament is found not to be explained only with the principle of traditional arrangement due to the seemingly irregular complex forms. In that sense, this study presents the concept of digital ornament and examined the backgrounds of ornament in digital age, that are complex system and non-Euclidean geometry. Accordingly, the present study takes an approach by dividing new formal types of ornament into algorithmic form, hybrid form and dynamic form to find out a principle of pattern organization. Lately, architects who actively use computer for their architectural designs take the algorithmic strategies in nature and create various and complex patterns by simple rules. The patterns are not the repetition of the same, but the production of singularities. In addition, hybrid form by morphing shows a topologically flexible evolutionary transformation, and is used to create in-between transitional shapes from the source to target. Finally, the patterns by the interaction between the system components which are corresponded to the embedded forces emerge from dynamic simulation of the natural environment. Rather than objects itself, focus is given to the process of generating forms, and the ornamental patterns as the revelation of such implicit order provide not just the formal beauty but also spatial pathways for lights and air, maximizing the effects of lights.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2010

The dynamic instability analysis of delaminated composite structures subjected to in-plane pulsating forces is carried out based on the higher order shell theory of Sanders. In the finite element (FE) formulation, the seven degrees of freedom per each node are used with transformations in order to fit the displacement continuity conditions at the delamination region. The boundaries of the instability regions are determined using the method proposed by Bolotin. The numerical results obtained for skew plates and shells are in good agreement with those reported by other investigators. The new results for delaminated skew plate and shell structures in this study mainly show the effect of the interactions between the radius-length ratio and other various parameters, for example, skew angles, delamination size, the fiber angle of layer and location of delamination in the layer direction. The effect of the magnitude of the periodic in-plane load on the instability regions is also investigated.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.78-81
• /
• 1995

In imaging the samples or human internal organs in a tube shape, general RF-probe types (that encircles a sample or places on top of the sample) are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios(SNR's). In the present study the inside-out probes for Magnetic Resonance Imaging (MRI) have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types which are positioned as close to the area as possible by putting the probe inside the tubelike sample to improve filling factor. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SNR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high possibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.397-400
• /
• 2010

The interfacial hydrodynamic issues in the screen printing are experimentally investigated by using model inks that are prepared by dispersing alumina nanoparticles in water. The printing patterns of the inks that are passed through differing geometrical shapes of screen on solid surfaces with differing wettability are not solely determined by the pattern on the screen. The dynamic contact angle cannot solely explain the physics of the problem, either. The difference between the screen and printing patterns was not the same for concave and convex corners. Especially the elasticity of ink affects the edge shape.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.342-346
• /
• 2013

In this study, it was attempted to disperse carbon nanotubes (CNTs) in a polymer matrix using a twin-screw extruder which was good for dispersing fillers of micron sizes but not suitable for dispersing nanometer-sized materials. Improved dispersion of CNTs could be achieved by the addition of inorganic fillers with different geometrical shapes. An increase in the matrix viscosity provided a high shear stress on aggregated CNTs, leading to a good dispersion of CNTs. The presence of the inorganic fillers was supposed to suppress the re-aggregation of CNTs in the regions where a lower shear stress was applied. As a result, the CNTs dispersion was well stabilized.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.314-319
• /
• 2005

When a robot navigates in the real environment, it frequently meets various environments that can be expressed by simple geometrical shapes such as fiat floor, uneven floor, floor with obstacles, slopes, concave or convex corners, etc. Among them, the convex corner composed of two plain surfaces is the most difficult one for the robot to negotiate. In this paper, we propose a gait planning algorithm to help the robot overcome the convex environment. The trajectory of the body is derived from the maximum distance between the edge boundary of the corner and the bottom of the robot when it travels in the convex environment. Additionally, we find the relation between kinematical structure of the robot and its ability of avoiding collision. The relation is realized by considering the workspace and the best posture of the robot in the convex structure. To provide necessary information for the algorithm, we use an IR sensor attached in the leg of the robot to perceive the convex environment. The validity of the gait planning algorithm is verified through simulations and the performance is demonstrated using a quadruped walking robot, called "MRWALLSPECT III"( Multifunctional Robot for WALL inSPECTion version 3).

• Advances in Computational Design
• /
• v.3 no.1
• /
• pp.71-86
• /
• 2018

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

• Advances in aircraft and spacecraft science
• /
• v.6 no.6
• /
• pp.479-495
• /
• 2019

Periodic cellular core structures included in sandwich panels possess good stiffness while saving weight and only lately their potential to act as passive vibration filters is increasingly being studied. Classical homogeneous honeycombs show poor vibracoustic performance and only by varying certain geometrical features, a shift and/or variation in bandgap frequency range occurs. This work aims to investigate the vibration filtering properties of the AUXHEX "hybrid" core, which is a cellular structure containing cells of different shapes. Numerical simulations are carried out using two different approaches. The first technique used is the harmonic analysis with commercially available software, and the second one, which has been proved to be computationally more efficient, consists in the Wave Finite Element Method (WFEM), which still makes use of finite elements (FEM) packages, but instead of working with large models, it exploits the periodicity of the structure by analysing only the unit cell, thanks to the Floquet-Bloch theorem. Both techniques allow to produce graphs such as frequency response plots (FRF's) and dispersion curves, which are powerful tools used to identify the spectral bandgap signature of the considered structure. The hybrid cellular core pattern AUXHEX is analysed and results are discussed, focusing the investigation on the possible spectral bandgap signature heritage that a hybrid core experiences from their "parents" homogeneous cell cores.