• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.5-12
• /
• 2002

Hydraulic conductivity k is one of the most important engineering properties of soil. However, both field and laboratory procedures fur the determination of k are often tedious and expensive. This paper presents new models to predict k using statistical parameters from grain size distribution. A number of permeability tests far 36 types of sands mixed based on statistics were conducted to develop the regression-based models. Parameters used to estimate k are both the geometric mean and geometric standard deviation of the soil samples, or the particle-size distribution curve parameters such as D_{10},D_{50},D_{60}. Hydraulic conductivity predicted by this model is in good agreement with the laboratory measurements fir the soil samples obtained at 20 locations within the Korean Peninsula. The performances of the proposed models were also compared with those of existing models including Hazen's.

• Journal of Food Hygiene and Safety
• /
• v.17 no.2
• /
• pp.55-60
• /
• 2002

In order to investigate the microbiological contamination of spring water, we performed the standard plate count, coliform and psychrotrophilic bacteria in 109 spring waters in Seoul. Of 109 spring waters, geometirc mean standard plate count was 0.19 CFU/ml, and the highest in Mt. Boolam, 4..43 CFU/ml and Mt. Dobong, 3.86 CFU/ml, but not detected in Mt. Woomyun and Mt. Cheonggye. Four spring waters have shown over 100 CFU/ml in standard plate count. The geometric mean psychrotrophilic bacteria was 49.2 CFU/ml, the most prevalent spring water was Mt. Nam, 125 CFU/ml, the lowest Mt. Woomyeun. Among a total of 109, coliform was detected from 21 spring waters(19.3%) and the geometric mean of coliform was 0.005 MPN/100ml. The isolated genera of coliform were 7 isolates of E. coli(33%), 5 Klebsiella(24%), 4 Enterobacter(19%), 3 Citrobacter(14%) and 2 Serratia(10%), respectively. The 22 spring waters(20.2%) failed to meet the standard limits of drinking water based on regulation in Korea. The inappropriate rate of standard plate count in spring water was 4.5%, that of coliform was 81.1% and both of them was 13.6%. There was the significant correlation between standard plate count and psychrotrophilic bacteria in spring water(r=0.95, p<0.01).

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.157-176
• /
• 1995

The purpose of this treatise is to study external form and internal meaning of minimal expression fashion which appeared as a major stream in modern fashion trends to understand one aspect of modernism in fashion and also to gain insight into internal value of human beings through fashion. The results can be summarized as follows : Firstly , minimalism is a trend in art attempting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means and minimal production process. Secondly, minimal expression in fashion means seeking simplicity an dpurity by using minimum design elements and minimal productive process. Thirdly, external from of minimal expression fashion can be created through application of following minimal expression techniques. 1. Minimal expression techniques in terms of line mean smooth curve flowing along body contours, straight lines of diagonal lines into desciplined silhouette or rendering internal contour lines. 2. Minimum expression techniques in terms of forms mean forms of smooth curves flowing along boyd or forms with simple geometric forms from qualitative aspects, In terms of volume it means quest for essence of pure body itself by revealing body as it is by minimizing the size of dress or its area and herein is contained using simple geometric pattern or utilizing textiles without any patterns.3. Minimal expression techniques by colors mean simple colors such as primary colors, colors without clear distinctions or natural colors and in terms of quantity it means quest for one color within one item of dress or combination of each items when getting dressed. 4. Minimal expression techniques in terms of fabrics mean fabrics with simple surfaced. In terms of quantity it means quest for essence of tight fitting thin textiles to human body or using transparent materials to human body thus exposing body contours as it is. 5. Minimal expression techniques in terms of productive process mean minimizing process of tailoring , sewing or ornamenting and seeking for simplicity and purity. 6. Minimal expression techniques in terms of manufacturing process mean selection of technique conveying simple image with disciplined simple image. Fourthly, minimal expression fashion with external expression as mentioned in the above lay body-priority style and its internal meaning can be asummed as quest for essence and purity of human body.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.565-574
• /
• 1999

In reverse engineering area, it is rapidly developing reconstruction of surfaces from scanning or digitizing data, but geometric models of existing objects unavailable many industries. This paper describes new methodology of reverse engineering area, good strategies and important algorithms in reverse engineering area. Furthermore, proposing reconstruction of surface technique is presented. A method find base geometry and blending surface between them. Each based geometry is divided by triangular patch which are compared their normal vector for face grouping. Each group is categorized analytical surface such as a part of the cylinder, the sphere, the cone, and the plane that mean each based geometry surface. And then, each based geometry surface is implemented infinitive surface. Infinitive average surface's intersections are trimmed boundary representation model reconstruction. This method has several benefits such as the time efficiency and automatic functional modeling system in reverse engineering. Especially, it can be applied 3D scanner and 3D copier.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.650-659
• /
• 2021

Multi-carrier waveforms have several advantages over single-carrier waveforms for radar communication. Employing multi-carrier complementary phase-coded (MCPC) waveforms in radar applications has recently attracted significant attention. MCPC radar signals take advantage of orthogonal frequency division multiplexing properties, and several authors have explored the use of MCPC signals and the difficulties associated with their implementation. The sidelobe level and peak-to-mean-envelope-power ratio (PMEPR) are the key issues that must be addressed to improve the performance of radar signals. We propose a scheme that applies pattern-based scaling and geometric progression methods to enhance sidelobe and PMEPR levels in MCPC radar signals. Numerical results demonstrate the improvement of sidelobe and PMEPR levels in the proposed scheme. Additionally, autocorrelations are obtained and analyzed by applying the proposed scheme in extensive simulation experiments.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.297-302
• /
• 2010

It is very important to know mean and confidence interval of water-quality constituents such as BOD for water-quality control and management of rivers and reservoirs effectively. The mean and confidence interval of BOD at Anseong2 and Hwangguji3 sampling stations which are located at the border of local governments in Anseong Stream were estimated and analyzed in this paper using Bootstrap technique which is one of non-parametric statistics. The results of Bootstrap were compared with arithmetic mean, geometric mean, Biweight method mean as a point estimator and distribution mean came from the appropriate probability distribution of Log-normal. In Bootstrap technique 12 data set was randomly selected in each year and 1000 samples was produced to get parameter of population. Visual Basic for Applications (VBA) of Microsoft Excel was utilized in Bootstrap. It was revealed that the Bootstrap technique can be used to explain more rigorously and robustly the achievement or violation of BOD target concentration in Total Maximum Daily Load (TMDL).

• ETRI Journal
• /
• v.26 no.3
• /
• pp.218-228
• /
• 2004

Using stereo images with ephemeris data from the Korea Multi-Purpose Satellite-1 electro-optical camera (KOMPSAT-1 EOC), we performed geometric modeling for three-dimensional (3-D) positioning and evaluated its accuracy. In the geometric modeling procedures, we used ephemeris data included in the image header file to calculate the orbital parameters, sensor attitudes, and satellite position. An inconsistency between the time information of the ephemeris data and that of the center of the image frame was found, which caused a significant offset in satellite position. This time inconsistency was successfully adjusted. We modeled the actual satellite positions of the left and right images using only two ground control points and then achieved 3-D positioning using the KOMPSAT-1 EOC stereo images. The results show that the positioning accuracy was about 12-17 m root mean square error (RMSE) when 6.6 m resolution EOC stereo images were used along with the ephemeris data and only two ground control points (GCPs). If more accurate ephemeris data are provided in the near future, then a more accurate 3-D positioning will also be realized using only the EOC stereo images with ephemeris data and without the need for any GCPs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.327-343
• /
• 2020

This study proposes a method to improve the geometric quality of KOMPSAT (Korea Multi-Purpose Satellite)-3/3A Level 1R imagery, particularly for efficient disaster damage analysis. The proposed method applies a novel grid-based SIFT (Scale Invariant Feature Transform) method to the Planetscope ortho-imagery, which solves the inherent limitations in acquiring appropriate optical satellite imagery over disaster areas, and the KOMPSAT-3/3A imagery to extract GCPs (Ground Control Points) required for the RPC (Rational Polynomial Coefficient) bias compensation. In order to validate its effectiveness, the proposed method was applied to the KOMPSAT-3 multispectral image of Gangnueng which includes the April 2019 wildfire, and the KOMPSAT-3A image of Daejeon, which was additionally selected in consideration of the diverse land cover types. The proposed method improved the geometric quality of KOMPSAT-3/3A images by reducing the positioning errors(RMSE: Root Mean Square Error) of the two images from 6.62 pixels to 1.25 pixels for KOMPSAT-3, and from 7.03 pixels to 1.66 pixels for KOMPSAT-3A. Through a visual comparison of the post-disaster KOMPSAT-3 ortho-image of Gangneung and the pre-disaster Planetscope ortho-image, the result showed appropriate geometric quality for wildfire damage analysis. This paper demonstrated the possibility of using Planetscope ortho-images as an alternative to obtain the GCPs for geometric calibration. Furthermore, the proposed method can be applied to various KOMPSAT-3/3A research studies where Planetscope ortho-images can be provided.

• Communications for Statistical Applications and Methods
• /
• v.21 no.3
• /
• pp.201-212
• /
• 2014

We provide a simple basic method to find bounds for higher order moments of unimodal distributions in terms of lower order moments when the random variable takes value in a given finite real interval. The bounds for moments in terms of the geometric mean of the distribution are also derived. Both continuous and discrete cases are considered. The bounds for the ratio and difference of moments are obtained. The special cases provide refinements of several well-known inequalities, such as Kantorovich inequality and Krasnosel'skii and Krein inequality.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.1049-1060
• /
• 2020

We prove rigidity theorems for ancient solutions of geometric flows of immersed submanifolds. Specifically, we find conditions on the second fundamental form that characterize the shrinking sphere among compact ancient solutions for the mean curvature flow in codimension two surfaces, which is different from the conditions of Risa and Sinestrari in [26] and we also remove the condition that the second fundamental form is uniformly bounded when t ∈ (-∞, -1).