• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.57-68
• /
• 2004

When an embankment is constructed on soft clay ground, the lateral displacement generally called as lateral flow is generated in the foundation ground. It strongly affects stabilities of structures, such as foundation piles and underground pipes, in and on the foundation ground. The lateral earth pressure induced by the lateral flow is influenced by the magnitude and construction speed of embankment, the geometric conditions and geotechnical characteristics of the embankment, and the foundation ground, and so on. Accurate methods for estimating the lateral earth pressure have not ever been established because the lateral flow of a foundation ground shows very complicated behavior, which is caused by the interaction of shear deformation and volumetric deformation. In this paper, a series of model tests were carried out in order to clarify effects of construction speed of an embankment on the lateral earth pressure in a foundation ground were design. It was found that the magnitude and the distribution of the lateral earth pressure and its change with time are dependent on the construction speed of the embankment. It was found that a mechanism for the lateral earth pressure was generated by excess pore water pressure due to negative dilatancy induced by shear deformation under the different conditions of construction speeds of embankments.

• Journal of the Korean Society of Costume
• /
• v.52 no.1
• /
• pp.53-67
• /
• 2002

자연을 분석함으로써, 얻어진 기하학적 패턴은 이미 자연의 질서를 포함하고 있는 논리적이고 합리적인 기본형이기 때문에 간결하며 시각적으로 명쾌감을 준다. 이러한 기하학적 패턴은 복식 디자인에 있어서 20 세기 이후 여러 디자이너의 작품을 통해 재구성되어 현대적 이미지를 나타내는 중요한 모티브가 되고 있으며, 다양한 기법과 재료로 형성화하여 도입되고 있다. 이에 본 연구는 복식의 문양, 실루엣, 디테일에 사용되고 있는 기하학적 패턴을 연구함으로써 기하학적 패턴의 새로운 조형가치를 고찰하였다. 먼저 기하학의 용어 정의를 하였고 기하학적 패턴의 유형과 표현 기법을 분석하고 정리하여 현대 패션에 나타난 기하학적 패턴의 조형미와 그것을 바탕으로 패션 이미지를 추론해 보았다. 현대 패션에 나타난 기하학 패턴을 분석해 보면 유형으로는 첫째, 기하하적 문양으로 복식디자인에 있어서 주로 평면적인 형태로 많이 나타나지만, 크기가 다르고 동일한 기하학적 패턴을 조합시킴으로서 평면적인 형태에 공간감을 부여하기도 하며, 같은 기하학적 패턴의 표면이라도 배치구조에 의해 직선 혹은 사선으로 지각되므로 전혀 다른 이미지를 주었다. 또한 현대 패션에 나타난 기하학적 패턴이 종류는 세로 스트라이프, 가로 스트라이프, 격자 문양, 원, 사선 스트라이프, 마름모, 사각형, 삼각형 등의 순서로 많이 나타났다. 둘째, 색채는 단색의 복식에 강한 대비가 이루어지는 색상으로 표현되어 역동감과 유연한 운동감을 나타났다. 셋째, 기하학적 실루엣으로 단순한 라인의 형태를 나타내거나 입체적이고 부조적인 형태로 구성되어 전체적인 실루엣으로 사용되어 강한 조형감각을 보여주는데 원형을 이용한 실루엣이 가장 많았으며 사각형을 이용한 실루엣, 삼각형을 이용한 실루엣 순서로 나타났다. 넷째, 기하학적인 디테일로 복식의 어느 한 부분에 장식적으로 사용되거나 입체적 형태로 부출 되어 부조적인 느낌을 주는데 소매에 가장 많이 나타났으며 앞여밈, 칼라, 밑단, 주머니 순서로 장식되었다. 다섯째, 현대 패션에 표현된 기하학적 패턴의 표현기법으로는 프린팅, 퀼팅, piece기법, 패치워크, 엮기, 꼴라쥬, 아플리케 순서로 많이 나타났다. 위의 분석을 토대로 기하학 패턴을 활용한 디자인에 내재된 조형의지는 다음과 같이 정리되었다. 첫째, 기하학적 패턴이 지닌 단순성과 경직성을 완화하기 위하여 여러 가지 패브릭을 조합시켜 입체적인 표면효과로 시각적인 착시효과를 극대화하였다. 둘째, 표현기법은 입체파적 표현주의의 특성의 하나로 복시에 사용되는 소재의 왜곡으로 설명할 수 있으며, 새롭고 실험적인 소재의 도입으로 인해 의외성과 부조화를 유발시키는 통시에 유희직인 일면도 지니는 일종의 그로테스크를 나타냈다. 이상에서 정립된 조형의지를 바탕으로 현대 패션에 나타란 기하학 패턴은 절제된 단순함과 명확성으로 단순미가 유추되었고 강한 색상대비로 인한 시각적 집중효과로 주목성을 가지며 재현이 가능하므로 반복성이 유추되었다. 그리고 표준영역이 없는 창의적 표현으로 풍부한 독창성을 보여주고 있다. 또한 내재된 패션 이미지를 분석해 보면 정확함과 차가움의 의미를 지닌 이지적 이미지와 우주의 질서를 반영하는 상징적 이미지, 복잡한 자연으로부터 간결한 형태로의 경향성이 이루어낸 인공적 이미지를 느낄 수 있었으며, 미래적 이미지와 전통적 이미지의 상반된 개념의 이미지를 같이 내포하고 있음을 추론할 수 있었다. 이와 같이 현대 패션에 표현된 기하학적 패턴은 복식을 조형예술 분야로 확실히 인식시키고 발전시키는 데 중요한 촉매제 역할을 담당하고 있으며 또한 많은 디자이너들에게 창조적 욕구를 불러일으키고 영감을 주는데 중요한 모티브를 제공하고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.704-709
• /
• 2014

Plate heat exchanger is being applied in the field of marine plants and chemical industry, such as OTEC and SWAC equipment. The study aims to interpret the heat transfer and pressure drop characteristics of plate heat exchangers to determine the geometric design parameters such as the channel space. In this study, heat transfer performance was numerically studied with respect to the variation of channel spaces. The results from numerical analysis indicated that the j factor was linearly decreased with the flowrate of seawater over every cases. As the flowrate of water increased with respect to channel spaces, the j factor decreased linearly. And the f factor decreased linearly with the increase of flowrate. When the channel space is 2.8~3.2 mm and 3.2~3.2 mm, respectively, the area goodness factor of plate heat exchanger showed the highest performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.361-367
• /
• 2011

The channel-forming discharge, which is a standard and single flow for the river maintenance and restoration project, should be estimated necessarily in the stable channel design. It is difficult to produce the specific pattern for the channel-forming discharge in the domestic rivers due to the insufficient researches and case studies. Also, it is improper to adopt the foreign cases for the domestic rivers and streams which have the high coefficients of river regime. Therefore, the channel-forming discharge possible to use for rivers with high coefficients of river regime is suggested in this study through analyzing the bankfull, specified recurrence interval, and effective discharges of Mangyeong River, Cheongmi Stream, and Hampyeong Stream for the abandoned channel restoration project. The bankfull discharge was calculated with geometric data using the HEC-RAS modeling and the flow, bed materials, and sediment data for the study reaches were used to estimate the specified recurrence interval and effective discharges. As a result for calculating the channel-forming discharge, the effective discharge was greater than the bankfull discharge in the river with high coefficient of river regime and the effective discharge was greater than the bankfull and there was no correlation between the coefficient of river regime and the characteristics of the specified recurrence interval discharges.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2012

Numerical analyses through Computational Fluid Dynamics have been performed to investigate the seawater flow field characteristics for various shrouds used in horizontal axis tidal current turbine systems. Seawater flow characteristics are largely influenced under constant tidal current velocity by the shroud geometry and there is considerable difference in fluid velocity distributions around the shrouds. Especially the location and magnitude of maximum seawater flow velocity directly affect turbine performance for power generation. For the cylinder-diffuser type shroud system whose cylinder and diffuser parts have the same length accelerated flow region is formed in the overall cylinder part while maximum velocity in the nozzle-diffuser type whose nozzle and diffuser parts have the same length with symmetry, locally appears near the minimum sectional area. In case of cylinder-diffuser type shroud fluid velocity increases rather high compared with current velocity. And fluid velocity at the centerline gradually increases from the entrance, and then decreases rapidly after reaching a peak close to the middle of the cylinder part unlike the nozzle-diffuser while there is not much variation near the rear of the shroud. These results of the seawater flow characteristics with various shroud geometries can be applied to optimal design for the development of efficient tidal current power generation systems.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.117-129
• /
• 2012

Road safety audit is the preventive enhancement strategy for safety. : it gets rid of beforehand the potential factor of a traffic accident in the stage of road planning and design and it evaluates the appropriation for road geometric structure or safety facility to prevent traffic accident in the stage of operation after the construction. Since this strategy is introduced to our country in the early 2000s, various projects have been processed and it was legislated recently. And now, the evaluation of past project for its continuation is needed. Therefore, in this study the evaluation of road safety audit on existing freeway is performed. The spatial extent of this study is Yong-dong line on which the safety treatment was executed in 2005 and 2006. And, the temporal range of this study is each 2-year of before and after from 2005 and 2006. The empirical bayes method of observational evaluation studies is applied to analyze. As a result, there is an effect of improvement on most of treated sections. But there is ineffective or negligible on some sections. Compared with the detail of treatment on each section, the effect of multiple or various treatments is good for that section. On the other hand, the section on which effect doesn't appear is the result of single or unimportant treatments. Throughout these results, the concrete analysis can be performed and the countermeasures designed for the section on which effect doesn't appear. Also it is used as reference to the future plan and direction of road safety audit on existing freeway.

• Journal of Science of Art and Design
• /
• v.9
• /
• pp.49-87
• /
• 2006

Narrative has broad domains. So it is related to the everything man faces in his daily life and also performed in various modes. Narrative is revealed through all media including a character, which is also applied to plastic art. And narrative objects formed beyond the differences in media aid forms of expression are commonly based on a language. The study on such objects which created a new conceit of narratology can be said to be a spiritual trend by which to understand the world and man from the viewpoint of a 'story'. Plastic art took high interest in narrative in the same period as the rise of postmodernist art in the latter half of the 20th century, which was also applied to sculpture. The researcher, therefore, investigated through the history of sculpture in the 20th century the process in which narrative was denied under the value system of modernism and reappeared with the quickening of postmodernism. And as a result this period could be briefly characterized by 'return to figure' and 'reappearance of narrative'. The is, such flow means that late sculpture converted its center of interest from simple geometric abstract forms to irregular, figurative images. The researcher chose as the subject of his study the work of Louise Bourgeois, who was judged to have performed narrative positively and successfully among a great number of performed narrative positively and successfully among a great number of postmodernist sculptors who adopted it as their own strategy of expression. As the central artist of postmodrnist sculpture, She expressed human desire and condition as sexuality through the introspection of her own personal experience in contrast to the character of pop art sensitive to external world. The researcher borrowed narrative semiotics as a method of analyzing more elaborately the problem about the generation of narrative shown in her works. For it, he selected as the sample work for analysis Bourgeois's , which were judged to contain narrative most abundantly and as the metaphor of a gaze and recollection presented a new woman self that sublimed love, hatred, and loneliness. The narrative in her works are characterized by introspection questioning one's own trauma. It has independent domain and characteristics and clearly reveals narrative and content-centered characteristics, which are commonly discovered in postmodernist sculpture. The researcher could more concretely and definitely understand the characteristics of narrative through figurative images by analyzing the sample work. The researcher wanted to call your attention to the fact that the sculpture in the late 20th century contained narrative commonly and uniformly despite being characterized by various expressions and modes. And the focused on highlighting the fact that the narrative was more effectively revealed through figurative images of human body and simultaneously analyzing the formalizing process and structure for narrative. Besides he wanted to argue that the position of narrative defining the characteristics of sculpture should be valued more justly. Also, such acceptance of narrative, which is discovered in the sculpture, will have to be understood as the characteristics of the period reflecting the cultural aspect of the present time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.1-13
• /
• 1994

The terrestrial phetogrammetry has the relative convenience of selecting the site of photo station in contrast with the aerial photogrammetry, and the flexibility in accuracy prediction of object point positioning. So it has the advantage in designing optimum photo taking system which can fulfill the required accuracy. For the convergent photos which are frequently used for the monitoring of cultural assets and ground facilities, almost all of the traditional studies for the optimum photo condition, both in theoretical or experimental, are basically depend on the symmetrical configuration at the normal direction to the center of the object. However, in many cases the surroundings of the object do not allow the normal photo direction or sufficient convergent angle, even more the object features are not always be seen as one panel like planar. In this paper, the accuracy variation of convergent photos for the multi-planar objects, which are composed by some orthogonal planes, are investigated to establish the optimum photo condition. The results of the accuracy analysis for the photo direction, convergent angle, as well as the object feature are expected to be utilized in system design of geometric configuration of convergent photos, which are adequate for the accurate monitoring of the objects, such as culural assets, facilities, precision instruments, deformation surveying, etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.9-16
• /
• 2012

Recently, an optics-based concentrator for solar concentration has been a key issue in development of photovoltaic systems. In the present study, a new, simple, easily producible planar concentrator based on a light guide system is proposed. In this device, solar light is concentrated by microprism optical patterns guiding the light, mainly through total reflection and refraction. The main design variables of the concentrator are the geometric concentration ratio ($R_c$) and the ${\Theta}_1$ and ${\Theta}_2$ of the microprism pattern. Ray tracing was simulated using commercial software, SPEOS, and the optical efficiencies of the light guide solar concentrator were predicted in each case. The predicted maximum optical efficiencies are 65.60%, 54.78%, and 46.78%, respectively, for $R_c$ values of 4, 5, and 6. The variation of the optical efficiencies according to ${\Theta}_1$, ${\Theta}_2$, and the incline angle of the incident light were predicted.