• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.192-199
• /
• 1997

The purpose of this paper is to get a powerful tool for response analysis of a spherical dome subjected to dynamic excitation based on mathematically analytical method, i. e., the Galerkin procedure in modal analysis, with sufficient accuracy and practicality. At first, this paper provides an approximate solution of eigen modes, which has sufficient accuracy and praticallity for response analysis in symmetric and antisymmetric state. In the second stage of this paper, response analysis of a dome subjected to horizontal earthquakes is executed as the application of these approximate modes. Many important response characteristics may manifest themselves through parametric survey of material and geometric properties.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.536-541
• /
• 2002

This paper proposes an approach of automatically calculating the center location of fiducial marks up to sub-pixel accuracy with model-free condition. The conceptual model, composed of two assumptions, about general geometric property of fiducial area and fiducial mark is established. The proposed approach is primarily based on the strategy of calculating the center of symmetry and is composed of three steps of processing: (a) determining horizontal center of fiducial area, (b) locating center of a fiducial mark, and, (c) finally calculating the exact center up to sub-pixel accuracy. Evaluation with respect to RMK style marks and RC style ones shows that the proposed approach can be evaluated as robust one. However there are several images which can't be analyzed by the proposed approach.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1280-1286
• /
• 2001

This paper presents some advanced and supplemental methods to enhance the accuracy in case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verify the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at the twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30m from the center of near side lane.

• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.325-330
• /
• 2004

For the monitoring of structures, it is desirable for the measurement system to deliver equal precision in all components. When using GPS the accuracy, availability, reliability and integrity of the position solutions is very dependent on the number and geometric distribution of the available satellites. Therefore the positioning precision is not the same in all there component, and large variations (in positioning) precision can be expected during a 24-hour period. This situation becomes worse when the line-of-sight to GPS satellites becomes obstructed, such as in urban environments. Pseudolites can be sed to augment GPS and improve a geometrically weak satellite constellation. The use of pseudolites as supplement(s) of GPS for the movement measurement of bridges is demonstrated in this paper. It is shown that pseudollites can improve the vertical position components.

• Steel and Composite Structures
• /
• v.29 no.6
• /
• pp.759-770
• /
• 2018

In the present investigation, by using the two numerical methods, free vibration analysis of laminated annular and annular sector plates have been studied. In order to obtain the main equations two different shell theories such as Love's shell theory and first-order shear deformation theory (FSDT) have been used for modeling. After obtaining the fundamental equations in briefly, the methods of harmonic differential quadrature (HDQ) and discrete singular convolution (DSC) are used to solve the equation of motion. Accuracy, convergence and reliability of the present HDQ and DSC methods were tested by comparing the existing results obtained by different methods in the literature. The effects of some geometric and material properties of the plates are investigated via these two methods. The advantages and accuracy of the HDQ and DSC methods have also been examined with different grid numbers and shell theory. Some results for laminated annular plates and laminated circular plates were also been supplied.

• Steel and Composite Structures
• /
• v.31 no.4
• /
• pp.397-408
• /
• 2019

In this paper, a geometrically nonlinear meshfree analysis of 3D various forms of shell structures using the double director shell theory with finite rotations is proposed. This theory is introduced in the present method to remove the shear correction factor and to improve the accuracy of transverse shear stresses with the consideration of rotational degrees of freedom.The present meshfree method is based on the radial point interpolation method (RPIM) which is employed for the construction of shape functions for a set of nodes distributed in a problem domain. Discrete system of geometrically nonlinear equilibrium equations solved with the Newton-Raphson method is obtained by incorporating these interpolations into the weak form. The accuracy of the proposed method is examined by comparing the present results with the accurate ones available in the literature and good agreements are found.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.52-59
• /
• 2021

In this study, we experimentally evaluated the mechanical properties and geometric form accuracy in FDM 3D printing processes based on the printing direction, building direction, and layer thickness. The specimen test results showed that the tensile strength increased by over 33% in the printing direction compared to the direction perpendicular to printing and the tensile strength becomes larger as the layer thickness decreased. Furthermore, the tensile and impact strengths in the building direction were significantly reduced due to the difference in the interlayer joining and bonding strengths of the fused material. Additionally, shrinkage of the material due to phase change induced curl distortion especially in thin and long 3D-printed products, which increased as the layer thickness increased.

• Current Optics and Photonics
• /
• v.6 no.5
• /
• pp.473-478
• /
• 2022

To overcome the capture-range problem in phase-diversity phase retrieval (PDPR), a geometrical-optics initial-estimate method is proposed to avoid a local minimum and to improve the accuracy of laser-wavefront measurement. We calculate the low-order aberrations through the geometrical-optics model, which is based on the two spot images in the propagation path of the laser, and provide it as a starting guess for the PDPR algorithm. Simulations show that this improves the accuracy of wavefront recovery by 62.17% compared to other initial values, and the iteration time with our method is reduced by 28.96%. That is, this approach can solve the capture-range problem.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.988-990
• /
• 2003

IKONOS image mapping is being considered a possible replacement to the traditional mapping in many countries due to their ease of access to current data and their potential high resolution. Survey Department of His Majesty's Government completed traditional orthophoto mapping of all urban and semi-urban areas of the country. The 1:5000 monochrome orthophoto maps of Kathmandu Valley were completed in 2003. In 2002, as a test, production of a near natural colour Image Map at 1:5000 scale of a part of Kathmandu Valley based on IKONOS data was carried out. A conventional line map plotting of the same area at 1:5000 was also prepared. The objective of the pilot project was to assess the geometric accuracy and the information content of these maps. The details of the study and their results are underlined. The findings of the study helps to explain whether IKONOS image map can replace conventional orthophoto map at 1:5,000 for urban areas of Nepal like Kathmandu.

• Current Optics and Photonics
• /
• v.8 no.2
• /
• pp.170-182
• /
• 2024

The dimensional accuracy and consistency of a dual oil circuit centrifugal fuel nozzle are important for fuel distribution and combustion efficiency in an engine combustion chamber. A point cloud measurement method was proposed to solve the geometric accuracy detection problem for the fuel nozzle. An improved variance focus measure operator was used to extract the depth point cloud. Compared with other traditional sharpness evaluation functions, the improved operator can generate the best evaluation curve, and has the least noise and the shortest calculation time. The experimental results of point cloud slicing measurement show that the best window size is 24 × 24 pixels. In the height measurement experiment of the standard sample block, the relative error is 2.32%, and in the fuel nozzle cone angle measurement experiment, the relative error is 2.46%, which can meet the high precision requirements of a dual oil circuit centrifugal fuel nozzle.