• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.647-663
• /
• 2023

The investigation of the disc cutter wear prediction has an important guiding role in TBM equipment selection, project planning, and cost forecasting, especially when tunneling in a long-distance rock formations with high strength and high abrasivity. In this study, a comprehensive database of disc cutter wear data, geological properties, and tunneling parameters is obtained from a 1326 m excavated metro tunnel project in leptynite in Shenzhen, China. The failure forms and wear consumption of disc cutters on site are analyzed with emphasis. The results showed that 81% of disc cutters fail due to uniform wear, and other cutters are replaced owing to abnormal wear, especially flat wear of the cutter rings. In addition, it is found that there is a reasonable direct proportional relationship between the uniform wear rate (WR) and the installation radius (R), and the coefficient depends on geological characteristics and tunneling parameters. Thus, a preliminary prediction formula of the uniform wear rate, based on the installation radius of the cutterhead, was established. The correlation between some important geological properties (K_V and UCS) along with some tunneling parameters (F_n and p) and wear rate was discussed using regression analysis methods, and several prediction models for uniform wear rate were developed. Compared with a single variable, the multivariable model shows better prediction ability, and 89% of WR can be accurately estimated. The prediction model has reliability and provides a practical tool for wear prediction of disc cutter under similar hard rock projects with similar geological conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.257-267
• /
• 2006

The earth retaining wall systems for excavation works in a populated urban area or a poor soil deposit can be limited due to various restriction. Thus there are various methods to be applied for them such as the soldier pile method, the diaphragm wall with counterfort and so on. In this study, the self-supported earth retaining wall using the DCM(Deep Cement Mixing) method, including its merits, demerits and some important characteristics occured in the design and the construction stage, was introduced. It might be reference for the other design and construction procedures using the DCM method.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.71-74
• /
• 2009

호주 Victoria주에서 2007년에 이어 2008년에 Victoria주 북부 지역에서 추가로 탐사 자료를 획득하였으며, 이에 대한 2차원 및 3차원 해석을 수행하였다. 새로이 얻은 자료는 이전의 측선과 나란하게 설정하여 이전 결과에서 해석하였던 전기비저항 영상의 연장성을 밝히고자 하였다. 2차원 및 3차원 역산 결과를 이 지역의 지질자료와 비료 해석한 결과 2007년 MT자료 해석으로부터 확인된 고비저항 및 저비저항대의 공통적인 특징을 새로운 측선에서도 확인할 수 있었으며, 또한 이 지역의 대규모 단층대로 영상화할 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.281-287
• /
• 2003

A Natural cavities were found at shallow depth during construction of a huge bridge in Moon-Kyung, Korea. The distribution patterns of cavities in the Moon-Kyung limestone were investigated carefully with a supplementary field job such as a structural geological survey, a geophysical survey, and a rock mechanical test in laboratory or field. A structural geological mapping produced a detail geological map on this area. It suggested that there were three faults in this area, and these faults had an influence on the mechanism of natural cavities. Among many kinds of geophysical surveys, an electrical resistivity prospecting was applied firstly on the specific area that was selected by results from the geological survey. Many evidences for cavities were disclosed from this geophysical data. Therefore, a seismic tomography was tested on the target area, which was focused by results from the electrical resistivity prospecting and was believed to have several large cavities. A distinct element numerical simulation using the UDEC was followed on the target area after completing all of field surveys. Data from field tests were directly dumped or extrapolated to numerical simulations as input data. It was verified from numerical analysis that several natural cavities underneath the foundation of the bridge should be reinforced. Based on the project result, finally, most of foundations for the bridge were re-examined and the cement grouting reinforcement was constructed on several foundations among them.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.393-399
• /
• 2020

본 연구에서는 터널 굴진 시 조우한 석회공동의 지하수 유출에 따른 지반침하 거동을 수치해석을 바탕으로 정량화하고 영향정도를 분석하였다. 현장에서 조사된 지하수위 및 지표면 침하량 등을 토대로 수치해석 기법을 적용하여 지질취약대 터널통과에 따른 지반침하거동의 특성을 분석하였다. 지하수 침투-응력연계해석결과, 수치해석결과는 실제 지반침하거동을 잘 반영하는 것으로 분석되었다. 연구결과, 지질취약대인 석회암 공동구간의 터널 굴착에 따른 지반 침하는 급격한 지하수위 하강이 주요 원인인 것으로 분석되었다. 수치해석결과, 지하수위 강하에 의한 토사층 체적감소로 인해 지하수 유출된 이후의 장기적인 아스팔트 지표면 장기 누적침하량은 76~118mm인 것으로 분석되었으며 침하량은 토사층 깊이가 깊을수록 증가하는 양상을 나타냈다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.141-143
• /
• 2003

The aim of this study is to evaluate the susceptibility of landslides at Clicap area, Indonesia , using a Geographic Information System (GIS). Landslide locations were identified from field surveys. The topographic and geological map were collected and constructed into a spatial database using GIS. The factors that influence landslide occurrence, such as slope, aspect and curvature of topography, were calculated from the topographic database and lihology and fault was extracted from the geological database. Then landslide susceptibility was analyzed using the landslide-occurrence factors by likelihood methods. The results of the analysis were verified using the landslide location data. The GIS was used to analyze the vast amount of data efficiently . The results can be used to reduce associated hazards, and to plan land use and construction.

• 방사성폐기물학회지
• /
• 제7권4호
• /
• pp.191-205
• /
• 2009

고준위방사성폐기물처분을 위한 부지특성평가 기술을 구축하고, 이를 활용하여 심부지질환경을 이해하기 위해 1997년부터 지금까지 한국원자력 연구원 주변 지역을 고준위폐기물처분을 위한 연구지역으로 선정하여 다양한 지질 관련 연구를 수행해왔다. 특히, 2002년에는 고준위폐기물의 처분 대상 심도의 시추공 (지하 500 m)을 굴착하였으며, 2006년에는 지하처분연구시설 (KURT, KAERI Underground Research Tunnel)을 준공하여 연구지역에 대한 심부지질환경 규명을 위해 노력하고 있다. 현재, 지하처분연구터널의 좌측 연구용 모듈 내에 500 m 길이의 장심도 시추공 및 지하처분연구시설에서 남쪽으로 약 200 m 이격된 위치에서 1,000 m의 장심도 시추공에서 다양한 부지특성평가 연구를 수행 중에 있다. 본 연구는 고준위폐기물의 심지층 처분을 위한 요소기술인 심부영역의 부지특성평가기술을 구축하기 위해 수행되었으며, 수리지질학적인 관점에서 부지특성평가의 기본 모델이 되는 3차원 지질모델을 구축한 내용이다. 연구지역에서 수행된 지표 지질 조사와 시추공 자료를 이용하여 종합 분석한 결과, 수리지질학적 관점에서 중요한 풍화대, 상부 저경사단열대, 심부 영역에 존재하는 결정론적 단열대를 규명하여 3차원으로 모형화하였으며, 향후 본 연구를 통해 도출된 지질요소의 수리지질특성을 평가하여 고준위방사성폐기물처분 분야에 중요한 기술인 심부 영역의 수리지질환경을 이해하는데 활용될 예정이다.

• 터널과지하공간
• /
• 제7권3호
• /
• pp.191-201
• /
• 1997

Geological and geotechnical surveys, in general, should precede the excavation to ensure the safety of the tunnel and should be followed up according to the various geological condition during the excavation. However actually the standard support patterns which were decided during the design step used be insisted for the whole excavation steps in spite of the various geological conditions. OO tunnel was excavated with NATM and a support pattern type-V in weak rocks. When the tunnel was excavated up to 25m long, the severe displacement was generated in the portal area and the shotcrete was damaged to make the cracks and the tunnel face was totally collapsed. It might happen owing to the one-day heavy rain, but the exact reason for that accident should be found out and the new optimal support patternt needed. Consequently three dimensional numerical analysis was applied for the evaluation of the cause of the tunnel collapse instead of two dimensional analysis, because three dimensional analysis can show better the real field phenomenon than two dimensional analysis in which the load distribution methods are adopted for the tunnel excavation. We could simulate the actual situations with three dimensional finite difference code and propose the new optimal support patterns.

• 자원환경지질
• /
• 제29권5호
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.662-663
• /
• 2004

In general, mineral resources prospect is performed in several methods including geological survey, geological structure analysis, geochemical exploration, airborne geophysical exploration and remote sensing, but data collected through these methods are usually not integrated for analysis but used separately. Therefore we compared various data integration techniques and generated final mineral resources potentiality map.