• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.15-24
• /
• 1994

In order to produce a consistent set of coordinates of the Korea Precise Primary Geodetic Network (PPGN) based on Suwon Datum, PPGN survey with the use of EDM had carried out between 1975 and 1993. In this study, data arrangement and rigorous adjustment was carried out to assess the net strength and local weakness and to evaluate the accuracy of PPGN. ss, specification for PPGN survey would be systematically studied and revised to new technology and field conditions. And basic data for redefinition of official coordinates. of 1st and 2nd triangulation points is obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.677-682
• /
• 2009

According to the revised law of survey, all the geographic information data including 1/1,000 digital topographic maps have to be converted to world geodetic reference system by the end of 2009. National Geographic Information Institute (NGII) formulated the policy to promote the conversion from local geodetic reference system to world geodetic reference system. However, the current conversion rate is lower than planned due to some impeding factors. Therefore, in this paper, those impeding factors are investigated and then efficient conversion strategies are established and provided. The research involves the validation of affine transformation, the determination of critical value for outlier detection and optimal number of common control points for coordinate conversion, and the treatment of old and new control points.

• Structural Monitoring and Maintenance
• /
• v.8 no.4
• /
• pp.309-328
• /
• 2021

The objective of this work was to develop a methodology for geodetic monitoring on onshore wind towers, to ascertain the existence of displacements from object points located in the tower and at the foundation's base. The geodesic auscultation was carried out in the Gravatá 01 and 02 wind towers of the Eólica Gravatá wind farm, located in the Brazilian municipality of Gravatá-PE, using a stable Measurement Reference System. To verify the existence of displacements, pins were implanted, with semi-spherical surfaces, at the bases of the towers being monitored, measured by means of high-precision geometric leveling and around the Gravatá 02 tower, concrete landmarks, iron rods and reflective sheets were implanted, observed using geodetic/topographic methods: GNSS survey, transverse with forced centering, three-dimensional irradiation, edge measurement method and trigonometric leveling of unilateral views. It was found that in the Gravatá 02 tower the average rays of the circular sections of the transverse welds (ST) were 1.8431 m ± 0.0005 m (ST01) and 1.6994 m ± 0.0268 m of ST22, where, 01 and 22 represent the serial number of the transverse welds along the tower. The average calculation of the deflection between the coordinates of the center of the circular section of the ST22 and the vertical reference alignment of the ST1 was 0°2'39.22" ± 2.83" in the Northwest direction and an average linear difference of 0.0878 m ± 0.0078 m. The top deflection angle was 0°8'44.88" and a linear difference of ± 0.2590 m, defined from a non-linear function adjusted by Least Squares Method (LSM).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.29-39
• /
• 1997

The need of transformation parameters from local geodetic datums to a geocentric coordinate system is becoming more common, with the increasing application of satellite positioning techniques to LIS/GIS survey with cadastral management. In this paper, the national transformation parameters between the Korean geodetic coordinates which is based on the Bessel 1841 ellipsoid and the WGS84 ellipsoid are determined by the least square methods with weighted parameter constraints. Three-dimensional geocentric coordinates are based on GPS observation at 31 stations in the geodetic network, the datum parameters are computed within a standard deviation of less than 1 meter. In South Korea, the national transformation parameters with Bessel geoid-heights are useful for GPS baseline processing and for middle-scale map/database transformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.37-45
• /
• 1991

The purpose of this study is to establish the geodetic control points of GPS in Korea and estimate a measurment ability of GPS for the long baseline. For this, we performed the simultaneous GPS observations at two points in Korea and one point in Japan, and analized the precision of GPS survey according to the data process methods. As the results, three dimensional coordinates of two points in Korea are precisely established on basis of WGS 84 coordinate system and it is demonstrated that the measurement ability of GPS is 0.1 ppm for long baseline. We expect that in the future this result will be used as the basic data for securing the geodetic control points of GPS in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.151-159
• /
• 1993

In conjunction with a vertical network. horizontal geodetic control points provide the basic framework for topographic mapping and legal survey. The design of such networks as well as the technical means for obtaining their coordinates have been changed in time, and therefore Korea National Geographic Institute has planned and observed the precise geodetic network since 1975. The aim of this study is to investigate the systematic distortions of the precise geodetic network in Korea implementing by the simultaneous adjustment. The results show that there are large discrepancies between adjusted and public coordinates in Chun-nam and Kyung-buk areas. The coordinate discrepancies are mainly due to the non-rigorous adjustment method and the disregard of the orientation unknown of the first direction for some blocks.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.137-150
• /
• 2015

The methodology on digital cadastre(World Geodetic System Conversion) needs to be specified because the primary target site is discussed for large national estate such as road, river etc. on nationwide. Comprehensively reviews on similar cases and literature reviews to make a methodology for digital cadastre on large national estate, cadastral map revision is required before converting to World Geodetic System. The revisions are on subdivision survey or the other surveys to the necessary area through inspection of geometry and attributes. And the researcher pointed out the need of registration conversion and union of parcel to remove small parcel or to remove the inconsistency of land use type. Basically a systematic maintenance of cadastral map is necessary because the World Geodetic System Conversion unresolved the poor cadastral map quality to digital cadastre on large national estate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.27-34
• /
• 1989

Geodetic control networks have been used for more than 200 years by peculiar national system, both to establish the size and shape of the earth, and to determine the positions of points on its surface. Junction schemes for the densified geodetic network are proposed to the case whether the accuracy of existing network is known or unknown, in this paper. The concepts of adjustment, under the condition of partial $X^TX$＝min., is applied to densification system. Moreover, the technique of epoch analysis, which is often used in small deformation survey net, is introduced to the national control network for unstable point detection.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.455-461
• /
• 2004

Now, GPS survey is used on equipment from leisure to precise geodetic survey and nation admits the result of GPS survey. When surveyors perform precise GPS survey, they use post processing method but they greatly use real time processing method to consider field status. Especially, when surveyors measure the result of moving target, they use real time GPS survey to the best method. For this study, the author precisely surveyed distance of ship launching from shipyard on real time using real time precise GPS method. In this paper, the author compares and examines the accuracy of first real time precise GPS survey method nationally and the capability on use. And the author performed real time precise GPS survey in NOKBONG and 21C shipyard positioning at GEOJEDO.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.191-193
• /
• 2010

In this study, compared with national control point offering in NGII executing Network-Based RTK measurement. As a result, can utilize in various field such as Geodetic Survey/GIS, ITS, Car Navigation, Mobile because error of actuality coordinate and about 0.5m publishes.