• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.179-182
• /
• 2003

This research aims to establish an optimal design method of filament wound structures. So far, most design and manufacturing of filament wound structures have been based on manufacturing experiences, and there is no established design rule. In this research, possible winding patterns considering the windability and the slippage between fiber and mandrel surface were calculated using the semi-geodesic path algorithm. In addition, finite element analyses using a commercial code, ABAQUS, were performed to predict the behavior of filament wound structures. On the basis of the semi-geodesic path algorithm and the finite element analysis method, filament wound structures were designed using the genetic algorithm.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.685-688
• /
• 2005

대표적인 이중곡면 산란체인 타원체를 표준 구조물로 설정하여 역방향(backscattering)에서의 고주파 전자파 산란 해석을 위한 creeping wave을 구하는 방법에 대해 알아보았다. 타원체는 비행기나 미사일 형태의 몸체를 모델링하는 기본 구조물이다. 시뮬레이션으로 타원체 표면에서의 geodesic path의 결과를 제시하였다.

• Advances in biomechanics and applications
• /
• 제1권2호
• /
• pp.85-93
• /
• 2014

In this paper, two procedures of enumerating the axial rotation are proposed using the unit sphere of the spherical rotation coordinate system specifying 3D rotation. If the trajectory of the movement is known, the integration of the axial component of the angular velocity plus the geometric effect equal to the enclosed area subtended by the geodesic path on the surface of the unit sphere. If the postures of the initial and final positions are known, the axial rotation is determined by the angular difference from the parallel transport along the geodesic path. The path dependency of the axial rotation of the three dimensional rigid body motion is due to the geometric effect corresponding to the closed loop discontinuity. Firstly, the closed loop discontinuity is examined for the infinitesimal region. The general closed loop discontinuity can be evaluated by the summation of those discontinuities of the infinitesimal regions forming the whole loop. This general loop discontinuity is equal to the surface area enclosed by the closed loop on the surface of the unit sphere. Using this quantification of the closed loop discontinuity of the axial rotation, the geometric effect is determined in enumerating the axial rotation. As an example, the axial rotation of the arm by the Codman's movement is evaluated, which other methods of enumerating the axial rotations failed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.211-214
• /
• 2000

Filament wound pressure vessels have been studied for the efficient design tool to consider the variation of fiber angles through-the thickness direction. Filament winding patterns were simulated from semi-geodesic fiber path equation to calculate fiber path on arbitrary surface. Finite element analyses were performed considering fiber angle variation in longitudinal and thickness directions by ABAQUS. For the finite element modeling of the pressure tank, the 3-dimensional layered solid element was utilized. From the stress results of pressure tanks, maximum stress criterion in transverse direction was applied to modify material properties for failed region. In the end of each load increment, resultant layer stresses were compared with a failure criterion and properties were reduced to 1/10 for a failed layer. Results of progressive failure analysis were compared with two experimental data.

• Composites Research
• /
• 제13권2호
• /
• pp.51-60
• /
• 2000

본 논문에서는 두께 방향의 와인딩 각도 변화를 고려한 필라멘트 와인딩 된 압력탱크의 해석을 수행하였다. 두께방향의 와인딩 각도를 고려하기 위하여 임의의 맨드릴 표면에 대한 필라멘트 와인딩 궤적을 찾아낼 수 있는 semi-geodesic path식을 도입하였다. 필라멘트 와인딩 된 압력탱크의 유한요소 모델링을 위하여 3차원 적층고체요소를 사용하였으며, 상용프로그램ABAQUS를 이용하여 유한요소해석을 수행하였다. 해석에서는 모재 파손에 의한 강성저하를 모사하기 위하여 재료 비선형성을 고려하였으며, 이를 위하여 각 하중 증분 후에 섬유 수직방향 응력을 모재의 인장강도와 비교하는 최대응력파손이론을 도입하였고, 파손이 일어난 층에 대해서 모재 방향의 재료 상수를 1/10로 저하시켰다. 그리고, 점진적 파손해석을 수행한 결과를 문헌에 주어진 실험데이터와 비교하였다.

• 대한산업공학회지
• /
• 제19권4호
• /
• pp.105-114
• /
• 1993

In this article, a planar geodesic (2-dimensional minimum length curve between two points) on which the maximum curvature is constrained and with prescribed initial and terminal directions is studied. A generic problem is formulated by the minimum-time optimal control problem in free terminal time. It is shown that the optimal path ($G^2$) may contain a singular arc or not and that the general types of $G^2$ can he classified into the 3 classes of control sequences. Finally, the explicit form of $G^2$ is derived geometrically as well as algebraically form the main theorem of this article.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.19-28
• /
• 2014

The filament winding method is widely used to manufacture products of fiber reinforced plastics (FRP), such as high pressure vessels, launch tubes and pipes. For reducing winding time, the method of winding by filament band which consists of several filament fibers is used. NC winding machine is used for precise winding and NC path is needed. Before filament winding, users should verify that winding path which presented by a line is appropriate by filament winding simulation. Also, the used length of each filament is different. So, if the peak filament exhausted, it causes to stop manufacturing. In this research, we developed software which visualizes 3D graphic of filament band winding path and simulates winding process on real time. And we proposed algorithm about calculation of each filament usage. We use geodesic equation for generating filament band surface and calculating the usage length of each filament.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.375-387
• /
• 2014

The purpose of this paper is to propose a method for evaluation of varying stiffness coefficients of tailored conical shells (TCS). Furthermore, a comparison between buckling loads of these shells under axial load with the different fiber path is performed. A circular truncated conical shell subjected to axial compression is taken into account. Three different theoretical path containing geodesic path, constant curvature path and constant angle path has been considered to describe the angle variation along the cone length, along cone generator of a conical shell are offered. In the TCS with the arbitrary fiber path, the thickness and the ply orientation are assumed to be functions of the shell coordinates and influencing stiffness coefficients of the structure. The stiffness coefficients and the buckling loads of shells are calculated basing on classical shells theory (CST) and using finite-element analysis (FEA) software. The obtained results for TCS with arbitrary fiber path, thickness and ply orientation are derived as functions of shell longitudinal coordinate and influencing stiffness coefficients of structures. Furthermore, the buckling loads based on fiber path and ply orientation at the start of tailored fiber get to be different. The extent of difference for tailored fiber with start angle lower than 20 degrees is not significant. The results in this paper show that using tailored fiber placement could be applied for producing conical shells in order to have greater buckling strengths and lower weight. This work demonstrates the use of fiber path definitions for calculated stiffness coefficients and buckling loads of conical shells.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.23-27
• /
• 2007

To store hydrogen with high pressure is one of key technologies in developing FCVs (fuel cell vehicles). Especially, metal lined composite structure, which is called Type 3, is expected to effectively stand highly pressurized hydrogen since it has high specific strength and stiffness as well as excellent storage ability. However, it has many difficulties to design Type 3 vessels because of their complex geometry, fabrication process variables, etc. In this study, therefore, optimal design of Type 3 vessels was performed in consideration of such actual circumstances using genetic algorithm. Additionally, detailed finite element analysis was followed for the optimal result.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.719-728
• /
• 2019

상수도 관망 밸브는 평상시 관로의 유향을 변경하는 역할을 하지만, 관로 파손, 수질 문제 등 사고 발생 시 해당 구역을 격리하는데에도 이용된다. 밸브조작에 의한 구역 단수는 주변 지역의 압력 및 물 공급 성능 저하를 유발한다. 최근 안정적인 상수도 관망 물 공급을 위협하는 사고가 다양하고 빈번하게 발생하고 있으며, 이에 따라 다양한 시나리오를 고려하여 밸브 위치 결정을 하는 것이 필요하다고 할 수 있다. 따라서 본 연구에서는 밸브의 개수, 구역격리 시 물 부족량, 수리학적 거리 인자(Hydraulic Geodesic Index, HGI)를 통합한 목적함수를 개발하고, 다양한 물 부족 시나리오에 기반한 밸브 최적 위치 결정 방법론을 제안한다. 제안한 방법론은 페스카라 관망에 적용되었으며, 시나리오별로 도출된 최적 밸브 설계안의 차이점을 분석하였다. 최적 밸브 위치 탐색 과정 중 수행된 관망 수리해석은 압력 기반(Pressure Driven Analysis, PDA)으로 수행하였다. 개발된 방법론으로 도출한 최적 밸브 설계안은 기존 설계안 대비 밸브 개수가 최대 19개나 적었고, 세그먼트 격리 시 물 공급 부족량 또한 상대적으로 작았다. 수원 수두가 낮은 시나리오를 고려할수록 더 많은 밸브가 설치되었는데, 밸브 추가 설치에 따른 비용증가는 다양한 시나리오에서 물 공급 성능 향상으로 이어짐을 확인하였다. 또한, 세그먼트 격리 상황 모의를 압력 및 유량 기반 해석으로 수행한 결과를 비교하여, 밸브 최적 위치 설계 수행 시 압력 기반 해석이 필요함을 확인하였다.