• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2007

The MH21 Research Consortium has conducted a high-resolution 3D seismic survey and a seafloor geochemical survey, to explore methane hydrate reservoirs in the eastern Nankai Trough, offshore Japan. Excellent geological information about shallow formations was obtained from the high-resolution 3D seismic survey, which was designed to image the shallow formations where methane hydrates exist. The information is useful in constructing a geological and geochemical model, and especially to understand the complex geology of seafloor, including geochemical manifestations and the structure of migration conduits for methane gas or methane-bearing fluid. By comparing methane seep sites observed by submersibles with seismic sections, some significant relationships between methane hydrate reservoirs, free gas accumulations below the seafloor, and seafloor manifestations are recognised. Bathymetric charts and seafloor reflection amplitude maps, constructed from seismic reflections from the seafloor, are also useful in understanding the relationships over a vast area. A new geochemical seafloor survey targeted by these maps is required. The relationships between methane hydrate reservoirs and seafloor manifestations are becoming clearer from interpretation of high-resolution 3D seismic data. The MH21 Research Consortium will continue to conduct seafloor geochemical surveys based on the geological and geochemical model constructed from high-resolution 3D seismic data analysis. In this paper, we introduce a basis for exploration of methane hydrate reservoirs in Japan by fusion of 3D seismic exploration and seafloor geochemical surveys.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.561-566
• /
• 2007

This study was conducted to clarify runoff production processes in forested catchment through hydrograph separation using three-component mixing model based on the End Member Mixing Analysis (EMMA) model. The study area is located in the coniferous-forested experimental catchment, Gwangneung Gyeonggido near Seoul, Korea (N 37 45', E 127 09'). This catchment is covered by Pinus Korainensis and Abies holophylla planted at stocking rate of 3,000 trees $ha^{-1}$ in 1976. Thinning and pruning were carried out two times in the spring of 1996 and 2004 respectively. We monitored 8 successive events during the periods from June 15 to September 15, 2005. Throughfall, soil water and groundwater were sampled by the bulk sampler. Stream water was sampled every 2-hour through ISCO automatic sampler for 48 hours. The geochemical tracers were determined in the result of principal components analysis. The concentrations of $SO_4{^{2-}$ and $Na^+$ for stream water almost were distributed within the bivariate plot of the end members; throughfall, soil water and groundwater. Average contributions of throughfall, soil water and groundwater on producing stream flow for 8 events were 17%, 25% and 58% respectively. The amount of antecedent precipitation (AAP) plays an important role in determining which end members prevail during the event. It was found that ground water contributed more to produce storm runoff in the event of a small AAP compared with the event of a large AAP. On the other hand, rain water showed opposite tendency to ground water. Rain water in storm runoff may be produced by saturation overland flow occurring in the areas where soil moisture content is near saturation. AAP controls the producing mechanism for storm runoff whether surface or subsurface flow prevails.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.247-248
• /
• 2001

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.273-281
• /
• 2007

Hyperalkaline groundwater formed by groundwater-cement components and its reaction with bedrock in a nuclear waste repository were simulated by geochemical modeling. The result of groundwater-cement components reaction showed that the pH of water was 13.3 and the precipitated minerals were Brucite, Katoite, Calcium Silicate Hydrate(CSH1.1), Ettringite, Hematite, and Portlandite. The result of interaction between such minerals and groundwater sampled in Gyeongju area also showed that the pH of groundwater reached 12.4. Interaction between such hyperalkaline groundwater and granite was simulated by kinetic model during $10^3$ years. This result showed that the final pH of groundwater reached 11.2 and the variation of pH was controlled by dissolution/precipitation of silicate and CSH minerals. Groundwater quality was also determined by dissolution/precipitation of silicate, CSH, oxide minerals. Our results show that geochemical modeling of long-term hyperalkaline groundwater and rock interaction can contribute to the safety assessment of engineered barrier by predicting geochemical condition in repository site.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.154-165
• /
• 1993

A stochastic method using continuous time Markov process is presented to model the one-dimensional convective nuclide transport in geologic media, which have usually heterogeneous feature in physical/geochemical parameters such as velocity, dispersion coefficient, and retardation factor resulting poor description by conventional deterministic advection-dispersion model. The primary desired quantities from a stochastic model are the mean values and variance of the state variables as a function of time. The time-dependent probability distributions of nuclides are presented for each discretized compartment given the volumetric groundwater flux and the intensity of transition. Since this model is discrete in medium space, physical/geochemical parameters which affect nuclide transport can be easily incorporated for the heterogeneous media as well as remarkably layered media having spatially varied parameters. Even though the Markov process model developed in this study was shown to be sensitive to the number of discretized compartments showing numerical dispersion as the number of compartments are increased, this could be easily calibrated by comparing with the analytical deterministic model.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.151-159
• /
• 2010

The effect of calcite and gypsum on the hydration of Portland cement was investigated using GEM-PSI, a geochemical model. Addition of calcite and gypsum up to 5 wt% of total cement clinker into Portland cement was found to influence the hydrate assemblage of the hydrated cement in different ways. The results of geochemical modelling showed that the fraction of calcium monocarbonate increased by the hydration of cement with the increase of calcite addition. The results of modelling also indicated that gypsum increased the fraction of ettringite in the assemblage of hydrated cement as the amount of gypsum added increases. This study showed that porosity generated by the hydration of cement had a significant relation with the amount of calcite and gypsum added. The porosity of hydrated cement was lower when calcite added up to 3 wt% of cement clinker compared to the hydrated cement with the same amount of gypsum addition. However, when calcite added more than 3% of cement clinker, the porosity of hydrated cement were higher than that of hydrated cement with the same amount of gypsum addition.

• Proceedings of the KSEEG Conference
• /
• 2002.06a
• /
• pp.81-100
• /
• 2002

While most of regulatory communities in abroad recognize ' 'natural attenuation " to include degradation, dispersion, dilution, sorption (including precipitation and transformation), and volatilization as governing Processes, regulators prefer "degradation" because this mechanism destroys the contaminant of concern. Unfortunately, true degradation only applies to organic contaminants and short- lived radionuclides, and leaves most metals and long-lived radionuclides. The natural attenuation Processes may reduce the potential risk Posed by site contaminants in three ways: (i)contaminants could be converted to a less toxic form througy destructive processes such as biodegradation or abiotic transformations; (ii) potential exposure levels may be reduced by lowering concentrations (dilution and dispersion); and (iii) contaminant mobility and bioavailability may be reduced by sorption to geomedia. In this review, authors will focus will focul on "sorption" among the natural attenuation processes of hazardous inorganic contaminants including radionuclides. Note though that sorption and transformation processes of inorganic contaminants in the natural setting could be influenced by biotic activities but our discussion would limit only to geochemical reactions involved in the natural attenuation. All of the geochemical reactions have been studied in-depth by numerous researchers for many years to understand "retardation" process of contaminants in the geomedia. The most common approach for estimating retardation is the determination of distrubution coefficiendts ($K_{d}$) of contaminants using parametric or mechanistic models. As typocally used in fate and contaminant transport calculations such as predictive models of the natural attenuation, the $K_{d}$ is defined as the ratio of the contaminant concentration in the surrounding aqueous solution when the system is at equilibrium. Unfortunately, generic or default $K_{d}$ values can result in significant error when used to predict contaminant migration rate and to select a site remediation alternative. Thus, to input the best $K_{d}$ value in the contaminant transport model, it is essential that important geochemical processes affecting the transport should be identified and understood. Precipitation/dissolution and adsorption/desorption are considered the most important geochemical processes affecting the interaction of inorganic and radionuclide contaminants with geomedia at the near and far field, respectively. Most of contaminants to be discussed in this presentation are relatively immobile, i.e., have very high $K_{d}$ values under natural geochemical environments. Unfortunately, the obvious containment in a source area may not be good enough to qualify as monitored natural attenuation site unless owner demonstrate the efficacy if institutional controls that were put in place to protect potential receptors. In this view, natural attenuation as a remedial alternative for some of sites contaminated by hazardous-inorganic components is regulatory and public acceptance issues rather than scientific issue.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.423-433
• /
• 2017

Korea Institute of Geoscience and Mineral Resources and Department of Geological Survey and Mineral Exploration in Myanmar have explored the Kalaymyo chromitite deposit, Myanmar since 2013. It is now necessary to find a geochemical indicator for efficient mineral exploration in the future and building a 3D geological model for this ore deposit. Mantle podiform chromitite is a major type of Cr ore in this region, which is considered to be formed by mantle-melt interaction beneath the mantle-crust boundary of oceanic lithosphere. In this study we measured major element composition of spinels in harzburgite, dunite and chromitite, and examined the hypothesis that spinel Cr#(molar Cr/(Cr+Al)${\times}$100) can be used as a geochemical indicator in exploration for the Kalaymyo chromitite. The results show that there is a clear correlation between spinel Cr# and distribution of chromitite. The spinel Cr# of harzburgite increases with decreasing the distance from the chromitite bodies. The spinel composition is also closely associated with texture and occurrence of spinels. The high Cr# spinels (30-48) are subhedral to euhedral and enclosed by olivine whereas the low Cr# spinels (16-27) are anhedral and commonly associated with pyroxenes. Often the low Cr# spinels show symplectite intergrowths with pyroxenes, indicating their residual nature. These petrological and geochemical results suggest that the high Cr# spinels have resulted from mantle-melt interaction. We suggest that spinel Cr# can be used as a geochemical indicator for Cr ore exploration and as one of critical factors in 3D geological model in the Kalaymyo chromitite deposit.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.755-761
• /
• 2010

This study analyzed water quality data from a coniferous forest catchment in order to quantify the contributions of runoff components to stormflow, and to understand the effects of antecedent moisture conditions within catchment on the contributions of runoff components. Hydrograph separation by the twocomponent mixing model analysis was used to partition stormflow discharge into pre-event and event components for total 10 events in 2005 and 2008. To simplify the analysis, this study used single geochemical tracer with Na+. The result shows that the average contributions of event water and pre-event water were 34.8% and 65.2% of total stormflow of all 10 events, respectively. The event water contributions for each event varied from 18.8% to 47.9%. As the results of correlation analysis between event water contributions versus some storm event characteristics, 10 day antecedent rainfall and 1 day antecedent streamflow are significantly correlated with event water contributions. These results can provide insight which will contribute to understand the importance of antecedent moisture conditions in the generation of event water, and be used basic information to stormflow generation process in forest catchment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.251-268
• /
• 1986

Selecting a site for the safe disposal of radioactive waste requires the evaluation of a wide range of geologic, mineralogic, hydrologic, and physicochemical properties. Although highly diverse, these properties are in fact interrelated. Site requirements are also diverse because they are influenced by the nature of the radionuclides in the waste, for example, their half-lives, specific energy, and chemistry. A fundamental consideration in site selection is the mineralogy of the host rock, and one of the most ubiquitous mineral groups is clay minerals. Clays and clay minerals as in situ lithologic components and engineered barriers may playa significant role in retarding the migration of radionuclides. Their high sorptivity, longevity (stability), low permeability, and other physical factors should make them a very effective retainer of most radionuclides in nuclear wastes. There are, however, some unanswered questions. For example, how will their longevity and physicochemical properties be influenced by such factors as radionuclide concentration, radiation intensity, elevated temperatures, changes in redox condition, pH, and formation fluids for extended periods of time? Understanding of mechanisms affecting clay mineral-radionuclide interactions under prevailing geochemical conditions is important; however, the utilization of experimental geochemical information related to physicochemical properties of clays and clay-bearing materials with geohydrologic models presents a uniquely challenging problem in that many assessments have to be based on model predictions rather than on experiments. These are high-priority research investigations that need to be addressed before complete reliance for disposal area performance is made on clays and clay minerals.