• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.637-637
• /
• 2012

본 연구에서는 내수침수 저감을 위하여 효율적(effective)인 우수저류조 설치에 따른 침수저감효과 극대화 방안을 제시하고자 한다. 여기서 효율성(effectiveness)은 침수저감량의 극대화 측면과 비용의 최소화 측면 두 가지로 구분된다. 최적 방재 시설물의 설치는 단순 설치비용 대비 저감량이 가장 큰 안을 제시하는 것은 의미가 없으며 일정 기준 이상의 방재성능을 발휘하면서 주어진 예산안에서 최적안을 찾아야 하므로 비용의 최소화 측면과 침수 저감량, 즉 맨홀에서의 월류 저감량을 최대화 하는 두 가지의 목적을 동시에 달성해야 한다. 따라서 본 연구에서는 다목적 최적화 알고리즘의 적용을 통하여 우수저류조 최적 설치지점을 선정하는 기법을 제안하였다. 본 연구에 적용한 다목적 최적화 방법으로는 목적함수의 최적해 탐색 효용성 측면에서 우수하다고 평가되고 있는 유전자 알고리즘을 적용하였다. 다목적 최적화의 경우 해의 우열을 판단하기 위한 적합도 함수는 실제 각 목적함수의 적합도 값(real fitness value)이 아닌 해의 상대적인 우열(dominance or non-dominance)에 따라 부여되는 등급(rank)에 의해서 해의 우열이 결정되며 여기서는 Fonseca and Fleming(1993)이 제안한 Ranking method를 적용하여 적합도를 결정하였다. 한편 도시 우수관망의 해석 및 우수저류조 설치에 따른 월류량 분석을 위하여 미 환경청(US Environmental Protection Agency; EPA)에서 제공하고 있는 EPA-SWMM 5.0 engine을 사용하였으며 최적화 알고리즘의 구성을 위하여 Visual C++와 SWMM DLL을 연동하여 사용하였다. 연구 대상유역은 인천 청라지구(3공구)를 대상으로 기법의 적용성을 검토하였으며 저류지 설치에 따른 비용함수는 EPA(2002)에서 제안한 저류지 체적대비 공사비용을 원화로 환산한 후 청라지구의 공시지가를 고려하여 결정하였다. 최적화 기법의 적용 결과 저류지 설치비용에 따라 최대로 월류량을 저감시킬 수 있는 우수저류조 최적 설치위치의 조합(Pareto-front)을 결정할 수 있었다.

• Proceedings of the KOR-KST Conference
• /
• 2002.02a
• /
• pp.17-42
• /
• 2002

전통적인 OD조사에 의한 OD추정의 여러 문제점들로 인해 링크관측교통량과 기존OD를 결합해 OD를 추정하고자 하는 연구들이 제시되고 있다. Yang(1995)은 일반화최소자승법을 풀기 위한 IEA와 SAB 알고리즘을 제시하였다. 그러나 두 알고리즘의 문제점은 첫째 실제 OD를 알기가 어렵기 때문에 기존 OD를 중요한 추정기준으로 설정한다는 것으로, 이러한 추정의 종속성으로 인해, 기존 OD와 실제 OD의 차이가 큰 경우 정확한 해를 도출하지 못한다. 두 번째 문제는 통행패턴 추정시 선형근사화를 가정하기 때문에 게임이론적 측면에서 전제로 설정한 완전한 Stackelberg 상황을 구현하지 못한다는 것이다. 이러한 문제점을 피하기 위해서는 기존 OD나 관측교통량의 오차에 일관적인 해도출 기법이 필요하다. OD추정 문제는 본질적으로 비선형이고 비볼록하여 전역해 탐색기법이 필요하기 때문에 전역최적화가 가능한 유전알고리즘을 이용한 OD추정모형(GAM)을 개발하였다. 사례네트워크 분석결과, GAM은 기존 OD의 오차에 대해 크게 종속적이지 않으며 OD구조가 변하는 경우에도 추정이 가능하여, 일반적으로 실제 OD를 알 수 없는(기존OD의 오차가 어느 정도인지를 알 수 없는) 도시부 네트워크에서 신뢰성있는 추정력을 보였다. 또한 기존 OD 추정모형은 비교적 용이하게 차종별로 관측할 수 있는 링크교통량을 차종구분 없이 단일차종으로 이용함으로써, 정보의 손실을 초래하여 결과적으로 모형의 추정력을 저하시켰다. 그렇지만 다차종 링크관측교통량으로부터 다차종 OD 추정연구는 거의 없었으며, 그 결과가 단일차종에 대한 추정결과와 어떻게 다른지에 대한 연구도 전무하였다. 본 연구에서는 유전알고리즘을 이용한 OD 추정모형을 다수단 OD 추정모형(GAMUC)으로 확대하였다. 사례 분석 결과 단일차종 OD추정기법은 심각한 추정오류를 범할 수 있으며, 그 적용성도 낮다는 것을 보였다. 다차종 OD 추정기법이 단일차종 OD 추정기법보다 양호한 추정력을 보였으며, 다차종 기법 중에서는 GAMUC가 IEAMUC보다 우수한 추정력을 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.

• Journal of KIISE
• /
• v.42 no.7
• /
• pp.878-888
• /
• 2015

Software project planning includes several processes for estimating the effort required to complete software project tasks, allocating human resources to tasks, and creating a project plan. Because software planning is becoming more complicated as the size of software projects grow, it is difficult for project managers to decide on a reasonable project plan. To help them, many automatic software project planning approaches have been proposed. The approaches all focus on minimizing project duration. But if the plan is simply to minimize the duration, without considering software quality, the plan can harm the eventual software quality. In our research to create a reasonable project plan, we consider software quality as well as duration of the project, by defining a software quality score. The project manager can plan the project to maximize software quality for a specific project duration.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.851-856
• /
• 2008

Construction of large-scale container ports with the productivity improvements in container cranes shortened time of staying port to increase the level of service it harbors efforts accelerated. About container crane system exerted on the input, which is designed to look good performance considering the states feedback control system. The states observer designed of container cranes state variables that are expected to measurement noise or particular measurement signal. In the status of existing research, the feedback gain matrix and the state observer gain matrix are searched by being separated solving. But the feedback gain matrix and the state observer gain matrix are searched by RCGAs at once that be used robust search method in this paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.360-366
• /
• 2008

The initial fuzzy partitions in fuzzy rule-based classification systems are determined by considering the domain region of each attribute with the given data, and the optimal classification boundaries within the fuzzy partitions can be discovered by tuning their parameters using various learning processes such as neural network, genetic algorithm, and so on. In this paper, we propose a selection method for fuzzy partition based on statistical information to maximize the performance of pattern classification without learning processes where statistical information is used to extract the uncertainty regions (i.e., the regions which the classification boundaries in pattern classification problems are determined) in each input attribute from the numerical data. Moreover the methods for extracting the candidate rules which are associated with the partition intervals generated by statistical information and for minimizing the coupling problem between the candidate rules are additionally discussed. In order to show the effectiveness of the proposed method, we compared the classification accuracy of the proposed with those of conventional methods on the IRIS and New Thyroid Cancer data. From experimental results, we can confirm the fact that the proposed method only considering statistical information of the numerical patterns provides equal to or better classification accuracy than that of the conventional methods.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.34-41
• /
• 2016

Unlike the commonly used On/Off solenoid, constant attraction force which is independent of plunger displacement is a considerably important characteristic to proportional solenoid of the EPPR Valve. Attraction force uniformity is mainly affected by the internal shape design parameters. Due to a number of shape design parameters, the optimal parameter values are very complex and time consuming to find by trial and error method. Much research has been conducted or are still in progress to find the optimal parameter values by applying various optimization techniques like Genetic Algorithm, Evolution Strategy, Simulated Annealing, or the Taguchi method. In this paper, the design parameters which have primary effects on the attraction force uniformity and the average attraction force are decided by main effects analysis of Design of Experiments. Optimal parameter values are derived using finite-element analysis and a neural network model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1318-1324
• /
• 2007

TSP(Traveling Salesman Problem) is a problem finding out the shortest distance out of many courses where given cities of the number of N, one starts a certain city and turns back to a starting city, visiting every city only once. As the number of cities having visited increases, the calculation rate increases geometrically. This problem makes TSP classified in NP-Hard Problem and genetic algorithm is used representatively. To obtain a better result in TSP, various operators have been developed and studied. This paper suggests new method of population initialization and of sequential transformation, and then proves the improvement of capability by comparing them with existing methods.

• Structural Engineering and Mechanics
• /
• v.8 no.2
• /
• pp.165-180
• /
• 1999

The cost effectiveness of using steel roof systems for residential buildings is becoming increasingly apparent with the decrease in manufacturing cost of steel components, reliability and efficiency in construction practices, and the economic and environmental concerns. While steel has been one of the primary materials for structural systems, it is only recently that its use for residential buildings is being explored. A comprehensive system for the design of residential steel roof truss systems is presented. In the first stage of the research the design curves obtained from the AISI-LRFD code for the manufactured cross-sections were verified experimentally. Components of the truss systems were tested in order to determine their member properties when subjected to axial force and bending moments. In addition, the experiments were simulated using finite element analysis to provide an additional source of verification. The second stage of the research involved the development of an integrated design approach that would automatically design a lowest cost roof truss given minimal input. A modified genetic algorithm was used to handle sizing, shape and topology variables in the design problem. The developed methodology was implemented in a software system for the purpose of designing the lowest cost truss that would meet the AISI code provisions and construction requirements given the input parameters. The third stage of the research involved full-scale testing of a typical residential steel roof designed using the developed software system. The full scale testing established the factor of safety while validating the analysis and design procedures. Evaluation of the test results indicates that designs using the present approach provide a structure with enough reserve strength to perform as predicted and are very economical.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.10-15
• /
• 2013

For design optimization, engineers should require the accurate information of design space and then explore the design space and carry out optimization. Recently, the total design framework, based on design of experiments and optimization, is widely used in industry areas to explore the design space above all. For optimizing turbofan engine design point, the response surface model is constructed by using the 7 level orthogonal array which satisfies the statistical uniformity and orthogonality and gets the dense design space information. The multi-objective genetic algorithm is used to find the optimal solution within the given constraints for finding global optimal one in response surface model. The optimal solution from response surface model is verified with GasTurb simulation result.