• Journal of Korean Library and Information Science Society
• /
• v.30 no.3
• /
• pp.295-322
• /
• 1999

The purpose of this study is to identify and present the solution to the problems of KORMARC on Disc, which was produced by the National Library of Korea and is being distributed nationwide. Currently, KORMARC on Disc has reached the serious level of duplicates of input record, error on input data and noise of retrieval. Futhermore, input data is not in accordance with KORMARC Rules for Descriptive Cataloging, thus generating many problems. Of all thing, since current MARC system itself is based on manual system, it does not correspond effectively to the online environment. Accordingly, in order to elevate the quality of KORMARC database, current problems must be resolved, at the same time, korea Machine Readable Cataloging must be modified into a format, more suitable to Machine Readable environment. Consequently, the current study analyzes and identifies problems of data in KORMARC on Disc, at the same time, it examines currently used KORMARC Format and Korea machine Readable Cataloging Rules for descriptive Cataloging as to provide easier usage and guidelines for accurate data inputs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1044-1051
• /
• 2004

This paper described a novel locomotion interface that can generate infinite floor for various surface, named as virtual walking machine. This interface allows users to participate in a life-like walking experience in virtual environments, which include various terrains such as plains, slopes and stair ground surfaces. The interface is composed of two three-DOF (X, Y, Yaw) planar devices and two four-DOF (Pitch, Roll, Z, and relative rotation) footpads. The planar devices are driven by AC servomotors for generating fast motions, while the footpad devices are driven by pneumatic actuators for continuous support of human weight. To simulate natural human walking, the locomotion interface design specification are acquired based on gait analysis and each mechanism is optimally designed and manufactured to satisfy the given requirements. The designed locomotion interface allows natural walking(step: 0.8m, height: 20cm, load capability: 100kg, slope:30deg) for various terrains.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.700-708
• /
• 2004

Flux-reversal machine (FRM) is a new doubly-salient stator-permanent magnet (PM) machine with flux linkage reversal in the stator concentrated windings. It can operate in both motoring and generating modes. In this paper, a novel design technique to improve the performance of FRM is proposed. Proposed techniques have a new stator winding and a magnet arrangement method. The stator and rotor shape with a concave type and a flux barrier are also proposed. According to the experimental results, it is shown that the proposed FRM have an improved performance.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.75-78
• /
• 2008

Tire molds are manufactured by aluminum casting, direct five-axis machining, and electric discharging machining. Master models made of chemical wood are necessary if aluminum casting is used. They are designed with a three-dimensional computer-aided design system and milled by a five-axis machine. In this paper, a method for generating and machining a tire surface model is proposed and demonstrated. The groove surfaces, which are the main feature of the tire model, are created using a parametric design concept. An automatically programmed tool-like descriptive language is presented to implement the parametric design. Various groove geometries can be created by changing variables. For convenience, groove surfaces and raw cutter location (CL) data are generated in two-dimensional drawing space. The CL data are mapped to the tread surface to obtain five-axis CL data to machine the master model. The proposed method was tested by actual milling using the five-axis control machine. The results demonstrate that the method is useful for manufacturing a tire mold.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.432-438
• /
• 2015

This paper presents an electromagnetic analysis of a tubular linear machine with axially magnetized permanent magnets using improved analytical techniques. Based on the magnetic vector potential and a two-dimensional polar-coordinate system, the magnetic field and armature reaction field can be derived. Using these, equivalent circuit parameters, such as the electromotive force and inductance, can be obtained analytically. Finally, the generating characteristics are derived with the equivalent circuit method. In this study, the finite element method was employed to provide a comparative evaluation, and experiments were conducted to validate the results of the analytical analysis.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.05a
• /
• pp.76-82
• /
• 1996

This paper was undertaken to analyze the morphology of wear debris generating from moving lubricated machine surfaces by image processing. The lubricating wear test was carried out under different experimental conditions using the wear test device was made in our laboritory and wear testing specimen of the pin on disk type wear rubbed in paraffine series base oil, by varying applied load, sliding distance. The four parameters(50% volumetric diameter, aspect, roundness and reflectivity) to describe the morphology have been developed and are outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring, thus overcoming many of the difficulties with current methods and facilitating wider use of wear particle analysis in machine condition monitoring.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.57-64
• /
• 2002

Finite element program(ANSYS) estimated thermal deformation quantity in high frequency heat treatment process of a machine tool fred drive system slideway and apply deformation quantity in roughing process. Having processed the heat treatment minimizing methods of the quantity of deformation heat treatment process. Having done heat treatment with high frequency after taper processing with considering the existed heat treatment generating the quantity of deformation, existed quantity of deformation can be reduced down to 80%, consequently productivity and material saving can be achieved. When high frequency heat treatment finite element method estimated deformation quantity at difference temperature and time, it is progress at cost don and saved time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2009

Effect of heterogeneity of combustion chamber has been thought as one of the way to avoid dramatically generating heat in HCCI Combustion. The purpose of this research is to investigate the effect of heterogeneity, especially thermal stratification and fuel strength stratification on HCCI Combustion fueled with DME and n-Butane. Thermal stratification is formed in Combustion Chamber of Rapid Compression Machine with 3 Kinds of pre-mixture has different properties. The stratified charge mixture is adiabatic compressed and on that process, in cylinder gas pressure and two-dimensional chemiluminescence images are measured and analyzed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.15-20
• /
• 2007

Recently the machine industry is rapidly advanced for improving productivity. Especially an effort decreased error factors of machine tool continuously is being studied. In this paper, we propose a method that decreased vibration in the high speed spindle. By appling 6-sigma technique(DMADOV), we can grasp the influence between the housing design and a rotation accuracy. For a correct conclusion, we measure an actual spindle and analysis by $ARMD^{(R)}$(rotation analysis program). inally we find out influenceable design factors and the improvement condition about 20.7%.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.217-237
• /
• 1995

One of the most distinguished advantages of five-axis machining is that complex free surfaces(such as impeller) can be machined by one setup. Five-axis CNC machine, however, is very expensive so that its usage is restricted to a few large companies. As an economical approach to five-axis machining, this paper presents a method for machining the five-axis free surfaces(using ball-end mill) on a three-axis CNC machine with an index table. The method developed consists of: a) determining the minimum number of part setups and their interference-free and collision-free potential machining area, b) calculating actual machining area for each setup, and c) generating 3-axis cutter path for each part setup. The method has been successfully tested via computer simulations for several complex surfaces including impeller.