• 호남수학학술지
• /
• 제39권2호
• /
• pp.217-231
• /
• 2017

In this paper, we introduce a generating function for a Legendre-based poly-Bernoulli polynomials and give some identities of these polynomials related to the Stirling numbers of the second kind. By making use of the generating function method and some functional equations mentioned in the paper, we conduct a further investigation in order to obtain some implicit summation formulae for the Legendre-based poly-Bernoulli numbers and polynomials.

• 한국추진공학회지
• /
• 제3권1호
• /
• pp.55-64
• /
• 1999

대형 조선소에서는 선박에 사용하고 있는 수많은 부재들은 고가이고, 고급기술을 필요로 하는 WORK-STAT10N급에서 구동되는 선박전용프로그램 등에 의하여 부재생성 및 네스팅을 하고 있다. 그러나 중소형 조선소의 경제적, 기술적인 사정으로 고가의 장비와 고급인력의 확보가 어려운 실정이다. 따라서 본 연구에서는 널리 보급되어 있는 PC에서 사용 가능한 파라메트릭 매크로에 의한 부재생성과 부재의 네스팅 프로그램을 개발하였다.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.1-11
• /
• 1999

The three-dimensional laminar mixed convection flow between the conductive printed circuit boards. on which the heat generating rectangular blocks are uniformly distributed, has been examined in the present study. The flow and heat-transfer characteristics are assumed to be pseudo periodic in the streamwise direction and symmetric in the cross-stream direction. Using an algorithm of SIMPLER, the continuity equation. the Navier-Stokes equations and the energy equation are solved numerically in the three-dimensional domain Inside the channel. The convective derivative terms are discretized by the QUICK scheme to accurately capture the flow field. The flow and the heat transfer characteristics are thoroughly examined for various Re and Gr.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.67-69
• /
• 2000

This paper deals with a method for determining an optimal operation strategy of dispersed generating sources. For effective utilization of dispersed generating sources, it is indispensable to consider their thermal merits in addition to electric power. And then the optimal operation of these sources can be determined easily by the principle of equal incremental fuel cost. This paper presents an priority method to decide the optimal location of those sources in power systems about the whole year. The validity of the proposed algorithms are demonstrated using a model system.

• Natural Product Sciences
• /
• 제7권2호
• /
• pp.45-48
• /
• 2001

The antioxidative effect of the extracts from the leaves and fruits of Acer ginnala against free radicals was studied by two different methods using DPPH radical-generating system, and hydroxyl radical-generating system $(Cu^{++}/H_2O_2\;system)$ which induces DNA strand breaking. Compared with well known antioxidative plants, green tea, Scutellaria baicalensis, the Acer ginnala extracts showed excellent radical-scavenging activity in DPPH radical-generating system and inhibited effectively hydroxyl radical induced-DNA strand breaking in a concentration-dependent manner in $Cu^{++}/H_2O_2$ system whereas the green tea extract stimulated the strand breaking at a low concentration. These results suggest that he extracts from the leaves and fruits of Acer ginnula could be good antioxidative agents.

• 대한전자공학회논문지
• /
• 제13권3호
• /
• pp.7-10
• /
• 1976

단일 펄스의 Nd-YAG 레이저를 발생시키기 위한 Q-스인치로서 LiNbO3 크리스탈을 사용할때 생기는 난점을 해결하기 위하여 그 중계자 특성을 조사하였으며 간단한 해결 방법을 제시하였다. To eliminate some difficulties encountered in the operation of LiNbO3crystal as a Q-switch for generating a single pulse Nd-YAG laser, the operational characteristics of the crystal, was investigated. Also a simple method for solving the difficulties was presented.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.413-420
• /
• 2015

In this study, we present a comparison of multistage axial flux permanent-magnet machines (AFPMs) with different topologies for use as 100 W-class portable generating systems. Three topologies were selected, and the maximum power density and high level of efficiency were achieved by following the response surface methodology (RSM) in the design. Three-dimensional finite element analysis (FEA) was used to conduct numerical experiments to obtain the optimum design using the RSM and suggest a proper configuration of the portable generating system.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.254-259
• /
• 2007

PM(Preventive Maintenance) can avail the generating unit to reduce cost and gain more profit in a competitive supply-side power market. So, it is necessary to perform reliability analysis on the power systems in which reliability is essential. Thus, to schedule optimal PM planning based on reliability that is defined RCM(Reliability-Centered Maintenance), FMECA(Failure Mode Effects and Criticality Analysis) assessment is very important. Therefore, in this paper, the procedure of FMECA assessment for optimal RCM is proposed by probabilistic approach using real historical failure data of combustion-turbine generators in Korean power systems. The stochastic FMECA is performed based on the effects of probable failure modes of combustion-turbine generating unit.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.309-314
• /
• 2004

The exhaust gas emission from marine diesel engines is one of the major environmental issues. The authors focus the use of photovoltaic energy for the electric power system on marine ships. This paper proposes an operation method of a photovoltaic/diesel hybrid generating system for a small ship in consideration of the fluctuating photovoltaic power due to solar radiation. The aim of the proposed operation method is to minimize the fuel consumption and storage capacity of the battery. The validity of the proposed control method is shown by the numerical simulation based on the experimental data of the photovoltaic system.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.753-761
• /
• 2004

In this paper, an efficient method for generating 5-axis cutting data for a turbine blade is presented. The interference elimination of 5-axis cutting currently is very complicated, and it takes up a lot of time. The proposed method can generate an interference-free tool path, within an allowance range. Generating the cutting data just point to the cutting process and using it to obtain NC data by calculating the feed rate, allows us to maintain the proper feed rate of the 5-axis machine. This paper includes the algorithms for: (1) CL data generation by detecting an interference-free heel angle, (2) finding the optimal tool path interval considering the cusp-height, (3) finding the adaptive feed rate values for each cutter path, and (4) the inverse kinematics depending on the structure of the 5-axis machine, for generating the NC data.