• 제목/요약/키워드: general design formula

검색결과 105건 처리시간 0.025초

복합 위상천이기 구성을 갖는 위상배열안테나의 효율적인 배열구성에 관한 연구 (A Study on Efficient Configuration of Array for Phased Aray Antenna with Hybrid Phased Shifting Device)

  • 정진우;박성일;안형순
    • 한국전자통신학회논문지
    • /
    • 제13권6호
    • /
    • pp.1199-1206
    • /
    • 2018
  • 복합 위상천이기 구성은 배열안테나를 부 배열로 구성한 후, 부 배열 내부에는 일반적인 위상천이기를 사용하고, 부 배열 단위에는 실시간 지연 위상천이기를 사용하는 구성이다. 상기 구성은 빔 편이 현상을 효율적으로 개선할 수 있으나, 배열 구성이 적절하지 않으면 위상배열안테나 주 빔의 주파수 별 이득 편차가 발생하게 된다. 이와 같은 문제를 해소하기 위해 시스템 설계 주요 요구사항인 비 대역폭, 최대 빔 조향 각도 그리고 최대 이득 편차 제한 기준을 기반으로 효율적인 배열을 구성할 수 있는 간소화된 수식을 제시하였다.

Pseudostatic analysis of bearing capacity of embedded strip footings in rock masses using the upper bound method

  • Saeed Shamloo;Meysam Imani
    • Geomechanics and Engineering
    • /
    • 제34권4호
    • /
    • pp.381-396
    • /
    • 2023
  • The present paper evaluates seismic bearing capacity of rock masses subjected to loads of strip footings using the upper bound method. A general formula was proposed to evaluate the seismic bearing capacity considering both the horizontal and vertical accelerations of the earthquake and the effects of footing embedment depth simultaneously. Modified Hoek-Brown failure criterion was employed for the rock mass. Some comparisons were made with the available solutions and the finite element numerical models to show the accuracy of the developed upper bound formulations. The obtained results show significant improvement compared to the other available solutions. By increasing the horizontal earthquake acceleration from 0.1 to 0.3, the bearing capacity was reduced by up to 39%, while the effect of the vertical earthquake acceleration depends on its direction. An upward acceleration in the range of zero to 0.2 results in an increase in the bearing capacity by up to 24%, while the downward earthquake acceleration has an adverse effect. Also, by increasing the embedment depth of the footing from zero to 5 times the footing width, the value of seismic bearing capacity was raised about 86%. The obtained results were presented as design tables for use in practical applications.

'아파트단지' 교통소음측정방안에 관한 연구 - 강북 강변도로 사례를 중심으로 - (An Analysis of the Traffic Noise Measurement Plans of 'Apartment Complexes' - A Case on the North Riverside Expressway in Seoul -)

  • 강준모;이성경
    • 대한토목학회논문집
    • /
    • 제26권1D호
    • /
    • pp.1-11
    • /
    • 2006
  • 본 연구에서는 소음에 대한 이론적 연구와 도로교통소음에 관하여 살펴보았다. 그리고 국내의 도로소음예측모델을 다른 선진국의 모델과 비교 분석하여 예측인자의 적용현황 및 적용상의 문제점을 도출하였다. 일반식 정립을 위한 사례연구에서는 국립환경연구원에서 제안한 식에 적용한 예측치와 실측치를 비교하여 국내의 도로교통소음 예측모델의 개선점을 살펴보았다. 또한 소음에 대한 통행량과 속도의 관계를 고찰해보기 위해서, 이 식에서 주요 요인으로 사용한 통행량과 속도의 두 요인 중에서 무엇이 더 큰 영향을 가지는지를 회귀분석을 통하여 속도가 통행량보다 더 밀접한 관계가 있음을 알 수 있었다. 따라서 도로소음을 줄이기 위해서는 차량의 통행량의 고려도 중요하지만 차량의 속도 규제가 더욱 중요하다고 볼 수 있다. 지구보정치 도출을 위한 사례연구에서는 도로교통소음이 단지내에 공간적으로 미치는 영향을 분석하고자 하였다. 세 아파트 단지의 도로교통소음을 측정하여 비교 분석함으로써 도로교통소음은 단지내에 평면적 입체적으로 영향을 미치고 있음을 확인하였다. 즉, 소음원에서 거리가 멀어질수록 소음의 크기가 적어지고, 높은 위치로 올라갈수록 소음의 크기는 증가하다가 어느 정도 높이 이상에서는 다시 소음의 크기는 줄어들고, 소음의 방향에 장애물이 있을 경우 소음의 영향이 줄어들었다. 따라서 단지내에 소음이 미치는 영향을 이러한 점들을 고려하여 공간적으로 파악한 단지 설계를 해야 한다.

근육형 남성용 팬츠 원형 개발 (Development of the Pants Patterns for Muscular Men)

  • 정혜진;김소라
    • 패션비즈니스
    • /
    • 제14권2호
    • /
    • pp.1-13
    • /
    • 2010
  • Recently, young men have become more muscular, as they have become increasingly more interested in health and their physical appearances. The trend these days is to wear slim suits to accentuate their figures. Men's pants are the one of the most general clothes which men wears. While pants are an ordinary item of clothing, most muscular men have fitting problems with ready-made pants. In view of this, this study aimed at developing a prototype pants pattern for muscular men. In this study, five muscular men were selected for wearing tests. The regression formulas, in which muscular men's body measurements were adopted, were applied to unsuitable body parts, especially the body parts determined inappropriate based on the results of the existing pants pattern wearing tests. After going through the first and second pants pattern wearing tests, the final pants patterns were developed that were suitable for muscular men. The results of the study were as follows: In order to solve the problem of the insufficient of ease due to the development of the hip muscles, the crotch length was made longer, (0.08${\times}$hip circumference+17.648)+1.5cm and front crotch width and back crotch width were made wider, 1.0cm each than those of the existing pants prototype patterns. The ease of 0.5cm was added to the hip circumference/4+2.5cm because of the development of the hip and thigh muscles.

압축력을 받는 선체판의 경계조건에 따른 탄소성거동에 관한 연구 (A Study on the Elasto-Plasticity Behaviour of a Ship's Plate under Thrust According to Boundary Condition)

  • 고재용;박주신;박성현
    • 해양환경안전학회지
    • /
    • 제10권1호
    • /
    • pp.29-33
    • /
    • 2004
  • 지금까지의 강구조설계에서는 일반적인 탄성좌굴개념을 적용하고 있다. 왜냐하면 현재까지의 실적선의 데이터와 경험적인 방법에 의해 도출된 여러 가지 룰에 의한 데이터가 상당히 신뢰할만한 정도를 갖고 있기 때문이라고 판단하기 때문이다. 그러나, 최근들어 판두께가 박판인 고장력강재가 선체에 폭넓게 사용되어지면서 탄성좌굴발생 시점이 빨라졌으며 이에따른 탄소성거동을 정확히 예측할 필요성이 대두되고 있다. 이에 본 연구에서는 선체의 이중저 판넬구조에서 압축하중을 받을때의 실제판부재의 주변지지조건을 네가지로 이성화하여 해석하였으며, 이때 실제 필연적으로 존재하게 되는 열가공에 의한 비대칭형 초기처짐을 적용하였고, 비선형해석기법으로서는 Arc-length method를 적용하였고 해석코드는 범용유한요소법 소프트웨어로 잘 알려진 ANSYS를 사용하였다.

  • PDF

한국의 초고령사회를 대비한 최소주거면적 기준의 인체측정학적 방법 연구 - Karl H. E. Kroemer의 인체측정학적 데이터 적용 방법 - (A Study on the Anthropometrical Method of Minimum Residential Space Standard for the Super-Aged Society of Korea - by Anthropometrical Data Application Methods of Karl H. E. Kroemer -)

  • 이호성
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제23권1호
    • /
    • pp.15-24
    • /
    • 2017
  • Purpose: Korea is expected to enter an aged society in 2018 and then a super-aged society in early 2025. The country's aging is progressing faster than any other country in the world. However, the foundation of the elderly friendly industry is weak, and measures at the government level are urgently needed. Especially, housing problems of the elderly are one of the most urgent measures to be taken. Korea does not have the minimum residential area standard for the elderly, and the current general minimum residential area standard is based on the survey of the housing situation without scientific evidence. Therefore, both standards need to be revised as soon as possible based on scientific evidence. Methods: The minimum residential area standard has been calculated following Karl H. E. Kroemer's Min or Max design also being called as-single cut and dual cut theory- as the maximum population value and minimum population value theory of Ernest J. McCormick. Therefore there is a need for a formula made using a few key factors, such as corresponding dimension, practical dimension, clearance, spare dimension, integrated dimension. These elements can be defined and used as formulas to calculate minimum residential area standards. Results: Assuming the results of the spatial variability in this study showed that it is possible to raise the standard of living in a terms of sustainable minimum size for the young, old and all residents. Implications: The government should set a minimum residential area standard with scientific grounds and set up a policy improving the life of people who live in an needy residential environment.

기초지반강성을 고려한 철골 건축구조물의 비선형 지진해석 (Nonlinear Seismic Analysis of Steel Buildings Considering the Stiffnesses of the Foundation-Soil System)

  • 오영희;김용석
    • 한국강구조학회 논문집
    • /
    • 제18권2호
    • /
    • pp.173-180
    • /
    • 2006
  • 구조물의 지진응답은 기초지반조건의 영향을 받는다. 이 연구에서는 고정지반과 연약지반을 고려한 3, 5, 7층 철골 건축구조물의 밑면전단력을 산정하기 위해 선형 시간이력지진해석과 비선형 Pushover 정적지진해석을 수행하였다. 등가정적강성식으로 구한 기초지반강성은 SAP2000의 Link 요소 중 Damper 요소를 사용하여 입력하였다. 범용구조해석 프로그램 SAP2000에 의한 시간이력으로 구한 철골건축구조물의 밑면전단력을 국내내진설계기준, UBC-97 설계응답스펙트럼, Pushover 정적 비선형해석으로 구한 밑면전단력과 비교하였다. 중력하중과 풍하중으로 설계된 철골 건축구조물은 0.11g의 중진에 대해 탄성응답을 보였고, 탄성 연약지반에서 구조물-지반의 상호작용과 지반 증폭에 의해 구조물의 변위와 밑면전단력이 증가되었다. 따라서, 중약진 지역에서의 건축구조물은 연약지반의 특성을 고려하여 탄성지진해석을 수행하는 것이 더 합리적이다.

신축이음용 벨로우즈의 거동특성에 관한 연구 (A Study on the Behavioral Characteristics of Bellows for Expansion Joints)

  • 정두형;진도훈;김병탁
    • 한국기계가공학회지
    • /
    • 제19권10호
    • /
    • pp.52-58
    • /
    • 2020
  • Bellows are corrugated mechanical elements used to absorb displacements or vibrations caused by temperature changes, pressure, earthquakes, waves, etc., which are welded to flanges or directly connected to pipes. Expansion joint bellows must not only be designed to sufficiently withstand the internal pressure of the pipes but also accommodate axial, transverse, and rotational deformations to minimize the transfer of forces to the sensitive components of the system. Bellows have various types of corrugations, but U-type bellows are most commonly used in general piping systems. In this study, the behavior of U-shaped one-, two-, and three-ply bellows with the same inner diameter under pressure and forced displacement was analyzed using the finite element method. The results were compared with the design formula in the Expansion Joint Manufacturers Association (EJMA)'s code. Manufacturer data were used for the applied pressure and force displacement. The behavioral characteristics of the three cases were compared via structural analysis because the stress levels will be different for each model, even if they have the same inner diameter. Since the analytical model has an axisymmetric shape but displacement occurs in the transverse direction, the finite element model was composed of 1/2 of the whole model, and ANSYS Workbench 17.2 was employed for the analysis.

교통안전을 고려한 고속도로 휴게소 설계기준 개발 (Developing Design Guidelines for Rest Area Based on the Traffic Safety)

  • 이현석;이의은;서임기;박제진
    • 한국도로학회논문집
    • /
    • 제14권3호
    • /
    • pp.173-182
    • /
    • 2012
  • 휴게소 진 출입부는 설계속도 등이 급변하는 구간으로 교통안전 취약구간이며 특히, 휴게소 진입부는 감속과 주차공간 검색 두 가지 작업이 동시에 수행되므로 이용차량의 안전성을 확보할 수 있는 설계기준이 필요하다. 국내의 경우 영업소나 나들목, 분기점 같은 출입시설에 대한 기하구조 기준은 수립되어 있는 반면, 도로의 부속시설인 휴게소에 대한 상세한 기하구조 기준은 없는 실정이다. 이에 본 연구에서는 일반형 휴게소 135개소를 대상으로 한 현장조사 및 사고조사 자료를 활용하여 휴게소진 출입부 기하구조에 대한 문제점을 도출하였다. 휴게소 진 출입부의 설계구간을 분류하고 각 구간에 대한 설계요소를 도출한 후, 휴게소 진 출입부를 대상으로 속도조사 및 차량주행행태 조사를 수행하고 분석을 통해 설계요소별 최소 기준을 도출하였다. 진입 연결로의 시/종점 속도에 따라 감속거리 산정식을 이용하여 진입 연결로의 최소길이는 40m를 제안하였고, 주행행태를 기반으로 선형 안전성 평가를 통해 접속 설치각은 12~$17^{\circ}$를 제안하였다. 개발된 휴게소 진입부 설계기준은 신설되는 휴게소 뿐만 아니라 기존 휴게소에 대해 현실적으로 적용 가능한 개선방안을 제시할 수 있을 것으로 판단된다.

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF