• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.575-582
• /
• 1989

The effects of raw material feeding procedures and gelation temperatures on zeolite synthesis are investigated. Thus, the synthesis of zeolite 4A from sodium aluminate and sodium silicate solutions is chosen as a model reaction, for which equi-molar hydrogelation is performed with variation of feeding procedures and gelation temperatures. The formation of crystal nuclei, often being referred to as precursors, is induced under different conditions, the variation being examined by means of viscosity and water contents. The final products of zeolite 4A are evaluated by XRD, SEM morphology, particle size analysis and cation exchange capacity. Evidence shows that the viscosity of the initial products and their water contents are markedly influenced by the feeding methods of the reactant materials and by the gelation temperature. Further, it is found that the gelation at an elevated temperatures near 7$0^{\circ}C$ can be made possible through modification of mixing procedures. This provides convenient means of controlling the particle size of the final products. In this regard, a continuous flow-type mixing technique is proposed, which is demonstrated to be superior to the conventional batch-type mixings. The significance of this finding may lie in savings of equipment as well as energy costs, especialy on a large scale commercialization of zeolite production.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.10
• /
• pp.1485-1489
• /
• 2003

The gelation for di-(2-ethylhexyl) phthalate (DEHP)-plasticized poly(vinyl chloride) was studied by measuring time-resolved small-angle X-ray scattering (SAXS) and a flow of the solutions in test tube. It was found that for the gelation there were three regimes. At Regime I, the solution rapidly changed to a gel, and the SAXS intensity showed a peak and the peak intensity increased, keeping the peak angle constant. Applying the SAXS intensity to the kinetic analysis of the liquid-liquid phase separation, it was revealed that the spinodal decomposition proceeded to develop a periodic length of 29.9 nanometer in size, a hydrogen-bonding-type association in polymer rich phase followed, and then it induced fast gelation rate. At Regime II, the gelation slowly occurred and the SAXS intensity was not observed, suggesting that a homogeneous gel network was formed by a hydrogen-bonding. At regime III, the solution was a homogeneous sol.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.290-295
• /
• 2022

Recently, the use of high-tech ceramic parts in functional electronic parts, automobile parts and semiconductor equipment parts is increasing. These ceramics materials are required to have high reproducibility, reliability, large size and complex shapes. The researchers initiated the work to develop a new shaping method called gel casting, which allows high performance ceramic materials with a complex shape to be produced. The manufacturing process parameters of gel casting include uniform mixing of the initiator, bubble removal, and slip injection. In this study, we analyzed the dispersion and gelation characteristics according to the change in the additive content of the alumina slurry in the gel casting process. The alumina slurry for gel casting was prepared by mixing a solvent, a monomer and a dispersant through a ball mill. Alumina powder and a gelation initiator were added to the mixed solution, and ball milling was performed for 24 hours. A viscosity of 6,435 cps and a stable zeta potential value were obtained under the conditions of alumina powder content of 55 vol% and dispersant 2.0 wt%. After curing for 12 hours by adding aps 0.1wt%, TEMED 0.2wt%, and Monomer 3, 5wt%, it was possible to separate from the molding cup, confirming that the gelation was completed.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2002

Polyurethane NCO prepolymers were synthesized with the polyols such as PTMG, GP and the isocyanate such as TDI at $40^{\circ}C$ for 8.5 minutes. As average molecular weights (${\bar{M_n}}$: 1000, 2000, 3000, 4000) of PTMG, and GP were decreased from 4000 to 1000, ratio of oil gelation increased from 298%, to 440%, for Bunker B. When oil and water were emulsified, the ratio of gelation was increased approximately two times. Ratio of gelation for emulsive Bunker B was increased from 402% to 910%, for PTMG1000 and increased from 440%, W 958% for GPI1000. Ratio of oil gelation for emulsive Bunk C which has higher viscosity than Bunker B was measured w 923% for PTMG1000 made with chain extender, i.e. EG, and measured to 1098% for GP1000. The gel made from GP which has three functional group showed soft and strong characteristic, as a result, it can be removed easily from oil spilled ocean.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.404-406
• /
• 1993

In order to detect the gelation of ultrahigh temperature (UHT) treated market milks during storage at 20+1C, the free amino groups were quantified with 2,4,6-trinitrobenzene sulfonic acid, and the measurement of pH values and the alcohol test were monthly carried out. The average tree amino groups were $0.94{\sim}1.11{\mu}M$ at 1 month, $1.95{\sim}2.17{\mu}M\;at\;5{\sim}6$ month and $4.95{\sim}6.36{\mu}M$ at 12 month. The pH values at the same time as above were $6.72,\;6.49{\sim}6.55\;and\;6.14{\sim}6.16$, respectively. The alcohol test showed positive results at $5{\sim}6$ month, which could indicate the casein instability and beginning of gelation. These results suggest that the gelation of UHT market milks could he predicted through checking some chemical parameters weekly and be helpful for quality control.

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.117-128
• /
• 2001

DMF is not a good solvent for PVA. There is no solvent-PVA interaction such as H-bonding. DMF/PVA makes a UCST system. DMF/PVA makes a gel through crystallization-induced gelation. X-ray, thermal analysis, and other experimental proofs are presented. The gelation rate was faster at low temperature. Small addition of PEG increased the rate of gelation, but urea decreased the rate. SEM showed the phase demixing process very clearly. In the early stage of gelation, only phase demixing was occurring at a low rate. Hence, no holes appear in the early stage photographs. As demixing proceeded further, the holes began to appear and the sizes became bigger. DMF phase remains many holes after vaporization and PVA phase constitute the matrix phase.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.506-511
• /
• 2003

DSC was used to investigate the thermal mechanism of acorn and corn starch with or without saccharides on gelation and retrogradation. When the samples were starch-saccharide-water system (s-s-w), from measuring of gelation enthalpy and temperatures of initial gelation, peak and conclusion(T$\_$0/, T$\_$p/, T$\_$c/), those of s-s-w system were higher than those of stank-water system (s-w). The retrogradation enthalpy of acorn starch and corn starch was straightly increasing by DSC measurement as storage times. This increase meant slowly becoming recrygtallization of amylopectin. In retrogyadation process, the starch-saccharide-water system's enthalpy was also increased. After 7 days went, the value of the enthalpy was steady. Saccharides were retarding retrogrodation because of stopping the recrystallization of amylopectin. Especially in using fructose and maltose, the retrogradation effect of maltose was well. These elements took effect the number of juntion zone, one of equatorial OH and dynamic hydration number. As these three elements were increasing, a starch-Rel-system was stabilizing.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.662-667
• /
• 1995

An internal gelation process was adopted for the fabrication of carbon-dispersed UO$_3$ microspheres which will be fed to the fabrication for uranium nitride microsphere fuels by the carbothermic reduction. For investigating the proper process conditions, a composition range of feed solution for preparing good UO$_3$ gel spheres was firstly defined by observing the gelation behavior. Within the defined solution compositions, carbon-dispersed microspheres were prepared and carbon distribution in microspheres were observed by SEM. The results showed that production of good carbon-dispersed microspheres was possible, and the most of carbon were evenly distributed in the microspheres although large carbon-rich aggregates were sparsely existent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.4 no.1
• /
• pp.19-23
• /
• 1975

From a study of the nutrient and gelation substances in Korean persimmon such as Jangdongsi, Pasi, Teabongsi, Kurigam, Nabjackgam, Gamsi and Hucks: The results obtained are summerized as follows: 1. According as persimmon changes into mellowed persimmon in the same kind the ammounts of sugar was increased, while the ammounts of fiber was decreased, but there was little difference in the other nutrient contents. 2. The ratio of 'Ca' and 'P' in persimmons in generally balanced at 1 : 2.5 3. Compared to the standard combination ratio of gelation substance, pectin in the persimmons was over but acid and sugars were very low.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.6
• /
• pp.550-552
• /
• 2006

Periosteum-derived progenitor cells (PDPCs) were isolated using a fluorescence-activated cell sorter and their chondrogenic potential in biomaterials was investigated for the treatment of defective articular cartilage as a cell therapy. The chondrogenesis of PDPCs was conducted in a thermoreversible gelation polymer (TGP), which is a block copolymer composed of temperature-responsive polymer blocks such as poly(N-isopropylacrylamide) and of hydrophilic polymer blocks such as polyethylene oxide, and a defined medium that contained transforming growth $factor-{\beta}3\;(TGF-{\beta}3)$. The PDPCs exhibited chondrogenic potential when cultured in TGP. As the PDPCs-TGP is an acceptable biocompatible complex appropriate for injection into humans, this product might be readily applied to minimize invasion in a defected knee.