• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.266-271
• /
• 2011

A reflection-type fiber-optic pH sensor, which is composed of a pH sol-gel film, plastic optical fibers, a mirror, a light source and a spectrometer, is developed in this study. As pH indicators, a bromthymol blue, a cresol red and a thymol blue are used, and they are immobilized in the sol-gel films. The emitted light from a light source is guided by a fiber-optic Y-coupler and plastic optical fibers to the pH sol-gel film in a pH sensing probe. The pH change in the sensing probe gives rise to a change in the color of the pH sol-gel film, and the optical characteristic of reflected light through the pH sol-gel film is also changed. Therefore, we have measured the spectra of reflected lights, which are changed according to the color variations of the pH sol-gel films with different pH values, by using of a spectrometer. Also, the relationships between the pH values and the intensities of reflected lights are obtained on the basis of the color variations of the pH sol-gel films.

• Journal of the Korean Ceramic Society
• /
• v.42 no.9 s.280
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.422-428
• /
• 2018

In this study, we developed honeycomb pads using foam and polymer gel and verified the impact protection performance of pads for the development of a fall protection pants for elderly women aged 65 and over who have a high risk of fracture due to falls. The results are as follows; In the first experiment, the impact protection performance was evaluated for four honeycomb pad samples (CR foam, EPDM foam, hardness 15 polymer gel, and hardness 30 polymer gel) manufactured to a thickness of 5 mm using a single material. When the force of about 10757N was applied to the specimens, all four pads reduced the impact force to 3100N or less. Polymer gels showed better protection than foam materials. In the second experiment, the thickness of the protective pad was set to 8 mm in order to improve the shock absorbing performance of the protective pad. As a result of evaluating the impact protection performance of the foam single pad and foam gel composite pad, the impact absorbing performance of the foam single pad was better. Finally, four kinds of protection pads were made by assigning the foam single pad and the foam gel composite pad to pants type and underwear type respectively. The pad thickness of the main protection area was set to 8 mm to enhance the protection, and gradually decreased to 5mm and 3mm toward the edge to improve the appearance and fit.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.1026-1038
• /
• 1995

Although aloe lost a lot of its previous popularity in modern clinical uses as medicine numerous scientific researches still have claimed the beneficial properties(curing and general tonic effect) of aloe gel. Whereas considerable contradictory reports have helped to confuse the aloe gel issue and continually aroused controversy about aloe gel efficacy. However health food, cosmetic and medicinal products made from aloe gel are widely available in the world market especially in U.S.A. so the growing of Aloe plant and the processing of A. vera gel have become big industries in some countries. In some previous papers the salicylic acid, one of the common trace gel components, was thought to have an analgetic and antinflammatory effect. Large amount of Mg ion in the gel was suggested to act as anesthetic, Mg-lactate as antihistamic, and Aloctin A(a glycoprotein) as wound healer by promoting the cell growth. The carboxypeptidase and bradykinase activity in the gel were proposed to have the pain relieving and antiinflammatory effect. But any of thes etheories concerining the physiological action of the trace gel components has not been demonstrated by modern pharmacology, and failed to be supported by clinical research. It was suggested by some research workers that trace amount of anthraquinone compounds in the gel play an important role to act as false substrate inhibitors for PG and TX production(antiprostanoid effect), by which, they believed, inflammation, burn and frostbite, and infected wound could be healed. This hypothesis has not been substantiated. Butthe suggested antimicrobial action, antidiabetic, and antidotic effect of aloe gel are likely to be attributed to the trace anthraquinone compounds. In a lot of recent experimental reports it has been claimed that aloe gel polysaccharides(acetylglucomannan, acetylmannan, and glycoprotein) have the antimicrobial, antinflammatory, antitumour, and infected wound healing effect by immunoenhancement. It is hoped that these effects will be soon documented in clinical studies, then the controversy on aloe gel beneficial effect will cease. In the 30 days subchronic toxicity test the lowest observed adverse effect level of acemannan(acetylmannan) on dog was 5.0 mg/kg, IP. But the aloe gel is generally agreed to be harmless and non toxic even for the internal use such as health food. In the case of idiosynrasy one must keep the delayed type hypersensitivity reaction of aloe gel in mind. In conclusion it seem to be impossible to simply refuse a lot of evidences made by research workers who have claimed aloe gel's beneficial effects and to deny the fact that there had been long therapeutic histories of Aloe plants.

• 한국전기화학회:학술대회논문집
• /
• 2002.11a
• /
• pp.141-158
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 2003.04a
• /
• pp.21-21
• /
• 2003

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2007

Purpose: The purpose of this preliminary report is to investigate the short term outcome of performing gel type fibrin matrix autologous chondrocyte implantation to patients who have damaged knee joint cartilage using secondary arthroscopy. Material and Methods: Six patients who have damaged knee joint cartilage were involved. The average size of defect was $5.13\;cm^2$. While performing primary arthroscopy, whole layer of cartilage bone was obtained either from the margin of damaged cartilage or the bilateral margin of a trochlea. The cartilaginous cells were obtained for culture for four to six weeks. While performing secondary minimal invasive arthrotomy, gel type fibrin matrix autologous chondrocyte was implanted on the chondral defect site. Results: 4 among 6 patients to be more than good in Modified Cincinnati Knee Scoring system. Lysholm function score was 59.5 preoperatively, and it improved to 76.25. ICRS grading by performing secondary arthroscopy revealed 4 out of 6 patients to be nearly normal. Conclusion: Gel type fibrin matrix autologous chondrocyte implantation is a treatment for cartilage defect, which takes less time to operate than the conventional implantation. In addition, this method minimizes the size of incision and allows arthroscopic surgery. However, long term follow up and more case study is thought to be necessary.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.94-103
• /
• 2001

SiO$_2$ and PDMS/SiO$_2$ xerogels which are derived PDMS into TEOS have been synthesized by sol-gel process and controlled pore size and distribution through 2 step acid/base catalyzed processes using HCI and NH$_4$OH as a catalyst. In HCl catalyzed SiO$_2$ and PDMS/SiO$_2$ xerogels, pH and gellation time of xerogel were 2.3~2.5 and 12~13 days, respectively, and the shape of xerogel was identified to pellet type and column type. Under acidic condition of final reaction solution, the hydrolysis rate is accelerating, resulting in long gel times. The shape of xerogel is pellet type. In contrast, under less acidic condition, the condensation rate is accelerating, resulting in shorter gel times and the shape of xerogel is column type. The surface area and average Pore size were changed 400$\rightarrow$600($\m^2$/g) and 15$\rightarrow$28$\AA$, respectively, depending to the increase of the mole ratio of HCl/NH$_4$OH, and represented uniform pore size distribution. It is that all the alkoxide groups are hydrolyzed by HCl after the first step and the condensation rate is enhanced by NH$_4$OH. The regular backbone structures of silica are formed at low temperature and the uniform pores are produced by heat treatment.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2489-2493
• /
• 2012

A new fluorescent system (acridine/RTIL hybrid gel) confined in the 3D micro-structure of a poly(lactic acid) membrane were prepared from 1-butyl-3-methylimidazolium-based ionic liquids ([bmim]X (X = $SbF_6$, $NTf_2$, Cl); RTILs), poly(lactic acid) (PLA), and acridine via the sol-gel route. SEM images showed that, in the presence of [bmim]$SbF_6$ and [bmim]$NTf_2$, 3D-ly paticulated structures were created inside the PLA membranes and acridine/RTIL hybrid gels were confined in gabs of particulates. However, the use of [bmim]Cl induced the formation of a 3D-ly porous structure containing the hybrid gel of acridine/[bmimCl in the micropores. The three fluorescent systems exhibited different fluorescence behaviors (fluorescence maximum and intensity) depending on the C2-H acidity scale of the RTILs (or their anion type). Acridine gels hybridized with [bmim]$SbF_6$ and [bmim]$NTf_2$ showed blue fluorescence with relative high intensity, whereas the hybrid gel with [bmim]Cl exhibited almost no fluorescence under dry conditions. However, the acridine/[bmim]Cl hybrid system in the micro-porous PLA membrane started to emit fluorescent light under humid conditions and showed a possible response, indicating that it could be applied as a humidity sensor.

• Journal of the Korean Ceramic Society
• /
• v.44 no.3 s.298
• /
• pp.137-141
• /
• 2007

$La_{2}O_{3}-TiO_{2}-SiO_{2}$ glass, a type that could not obtained so far by the conventional melting method, was prepared successfully using a sol gel process. Glass derived with the sol-gel process has compositions of $5La_{2}O_{3}-5TiO_{2}-90SiO_{2},\;5La_{2}O_{3}-10TiO_{2}-85SiO_{2}$, and $5La_{2}O_{3}-20TiO_{2}75SiO_{2}$. The UV-visible absorption edge of all glass compositions was below 400 nm. The measured density is in the range of 2.55-2.89, and was nearly identical to the calculated density and the refractive index of the glasses derived from the sol-gel ranges from 1.545 to 1.645. The molar additive coefficient of $TiO_{2}$ measured in this ternary system is lower than the calculated value, while the value of $La_{2}O_{3}$ is higher.