• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.138-145
• /
• 2007

The effects of amylopectin and hydrocolloid (locust bean gum and guar gum) content on wheat flour dough and noodle properties were investigated. As the amount of amylopectin increased, the water absorption rate (farinograph), the tension (tension test), the gel stability (freeze-thawing treatment), and the springiness and the cohesiveness (TPA) increased, but the pasting temperature (RVA), the lightness and yellowness (color measurement), and the hardness (TPA) tended to decrease. In sensory evaluations, the scores for cohesiveness, springiness, and acceptability of cooked noodle increased as the proportion of amylopectin increased. The proper combination of amylose/amylopectin ratio and hydrocolloids improved the freeze-thaw stability and the sensory acceptability of wheat flour dough and noodle.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2010

To develop a new functional kimchi with antioxidative properties, salted baechu was soaked in black rice water extract for 6 h at room temperature. The antioxidative property of the water extract was $78.75{\pm}1.18%$ that of the control (0.1% [w/v] alpha-tocopherol). The black rice gel was added to the baechu kimchi preparation. The color of baechu kimchi treated with black rice water extract changed to dark violet and/or black. Control kimchi and black rice water-treated kimchi were stored at $4^{\circ}C$ for 30 days. No significant differences were detected between the control and the black rice water-treated group in the early stages of fermentation. As fermentation time increased, pH decreased and titratable acidity increased rapidly in control kimchi. However, such marked changes were not evident in test kimchi. The hardness value of black rice water-treated kimchi was higher than that of control kimchi after the midpoint of the fermentation period. The storage life of baechu kimchi treated with black rice water extract was prolonged by up to 5 days compared with control samples, owing to a decline in lactic acid bacteria and yeast levels during the final fermentation period in black rice water-treated kimchi. The total phenolic levels and the antioxidative capacity of black rice water-treated kimchi (83%) were approximately 1.5-fold higher than in control kimchi (57%). In sensory evaluation, black rice water-treated kimchi scored higher than did control kimchi using a blind test protocol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1656-1663
• /
• 2013

Processing conditions of mackerel sausage were optimized for number of washes (0, 1, 2, and 3 times) and percentages of various additives: salt (1, 1.5, 2, 3%), phosphate complex (0.1, 0.3, 0.5%), sugar (1, 2, 3%), and corn starch (1, 3, 5%). The whiteness of mackerel sausage significantly increased with increasing washing time, but the whiteness of mackerel sausage prepared with additives did not show large differences. Conditions consisting of two washes, 2% salt, 2% sugar, and 5% corn starch showed the highest hardness and gel strength, whereas the group supplemented with phosphate complex showed no considerable differences compared to the control. In the sensory evaluation, the mackerel sausage prepared with two washes compared to the control scored higher for color, aroma, and overall preference. In addition, mackerel sausage supplemented with 2% salt, 2% sugar, and 5% corn starch scored highest in overall preference. There was no significant difference in mackerel sausage supplemented with phosphate complex. Therefore, these results suggest the optimal conditions for improving the texture and sensory properties of mackerel sausage were two washes, 2% salt, 0.5% phosphate complex, 2% sugar, and 5% corn starch.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.783-793
• /
• 2003

The effects of various kinds of starch (mungbean, potato, corn and a blend of potato and com starch) on the quality characteristics of muhwakwa-pyun were studied according to the storage duration. The sweetness, pH and total acidity of muhwakwa extract were analyzed, as were the Visco/Amylograph viscosity profile and DSC thermodynamic characteristics of starches. For quality characteristics, color difference, instrumental texture characteristics and sensory characteristics were compared. The sweetness of muhwakwa extract was satisfactory but the total acidity was low for Kwa-pyun manufacture. Therefore, its pH was adjusted to 3.4 by adding 10％ citric acid with an amount of 1％ of total liquid. From the Visco/Amylograph viscosity profile and DSC thermodynamic characteristics of starches, a blend of potato and com starch was found to be easy to cook and form a gel but a little more resistant than the other starches in terms of retrogradatin. Lightness (L) and yellowness (b) of Kwa-pyun increased while its redness (a) decreased by the storage. The color became whiter and the clarity decrease regardless of the kinds of starch, which became obvious after 3 days of storage. The hardness, springiness, adhesiveness and cohesiveness tended to decrease with storage, which was weak in a blend starch. The overall acceptability of Kwa-pyun made with a blend of potato and com starch was evaluated as being the best among the samples tested. Therefore, for traditional kwa-pyun manufacture manufacture mungbean starch might be replaced with a blend of potato and corn starch which is less expensive and easily available in the market nowadays.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.431-440
• /
• 2006

This study was carried out to compare of yield, physico-chemical and sensory characteristics for chicken surimi manufactured by alkaline (pH 11) adjustment with different raw materials. Four experimental groups were surimi with chicken breast (T1) and chicken leg (T2) by spent hen, SF-MDCM (T3) and JY-MDCM (T4). Yield was higher in order of T1>T2>T3>T4 (p<0.05). The yield, physico-chemical and sensory characteristics of T1 were significantly higher than those of other treatments. Especially, $L^*$ and W value, shear force, textural properties, folding test, breaking force, gel strength, breaking $force{\times}deformation$, flavor, color and overall acceptability were higher in T1 but ar value, cooking loss, collagen and myoglobin content of T1 were lower than those of other treatments (p<0.05). Deformation, aroma, juiciness, tenderness were higher but met-myoglobin and yield of T4 were lower than those of T2 and T3 (p<0.05). Crude fat cooking loss and met-myoglobin content were higher in T2 but $b^*$ value, brittleness, hardness, gumminess, chewiness, folding test, breaking $force{\times}deformation$ and aroma of T2 were lower than those of other treatments (p<0.05). pH, collagen and moisture content and br value were higher but crude protein, folding test, $L^*$ and W value, cohesiveness, tenderness of T3 were lower than those of other treatmene (p<0.05). Correlation coefficients (r>0.8) between folding test and other items was positive in crude protein $L^*$ value, shear force and cohesiveness but negative in moisture content (p<0.05).

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.91-98
• /
• 2016

This aim of the present study was to evaluate the effects of phosphate on the quality properties of the surimi-like materials. Surimi-like materials as a control was prepared with beef heart by three times of washing treatment. Three types of surimi-like materials were manufactured by different conditions(T1: 2% salt, T2: 1.95% salt+0.05% phosphate, T3: 1.90% salt+0.10% phosphate). The moisture content was significantly lower in T1 than the control, and T3 sample had the highest crude protein content(P<0.05). The cooking loss was significantly lower in T2 than the control, and T2 sample had the highest water-holding capacity(P<0.05). The lightness and whiteness values were significantly lower in the treatment samples compared to the control sample; whereas redness values was higher than the control(P<0.05). Beef heart surimi-like materials added with salt and phosphate had higher in texture properties in the control, and T3 sample had the highest hardness, cohesiveness, gumminess and chewiness values(P<0.05). Therefore, the addition of phosphate could increase the protein content and gel properties as well as water-holding capacity of surimi-like materials from beef heart.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).