• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.508-517
• /
• 1998

We investigated the effects of godulbaegi extracts on the physiochemical properties of biological membranes as membrane stability and fluidity employing the phospholipid liposomal membrances as a biomembrane-mimetic system. The addition of the godulbaegi extracts to the phospholipid exterted great effects stagbilized the barrier function of the liposomal membranes in proportion to the concentration of the additive and significantly increased the membranes fluidity. The values of the fluorescence polarization of 1,6-diphenyl 1,3,5-hexatriene (DPH) decreased gradually as the temperature increased, and decreased abruptly near the phase transition temperature (Tm) of the liposome from gel to liquid crystalline state as usual. These results suggest that the activities of the godulbaegi extracts to enhance the stability and fluidity of the liposomal membranes have implication in their biological activities.

• 태양에너지
• /
• 제19권1호
• /
• pp.29-36
• /
• 1999

ZnO/n-Si junctions were fabricated by spin coating with ZnO precursor produced by the sol-gel process. In order to increase the electrical conductivity of ZnO films, the films were n-doped with Al impurity and subsequently annealed at about $450^{\circ}C$ under reducing environments. The ohmic contacts between n-Si and AI for a bottom electrode were successfully fabricated by doping the rear surface of Si substrate with phosphorous atoms. The front surface of the substrate was also doped with phosphorous atoms for improving the efficiency of the solar cells. Consequently, conversion efficiencies ranging up to about 5.3% were obtained. These efficiencies were found to decrease slowly with time because of the oxide films formed at the ZnO/Si interface upon oxygen penetration through the porous ZnO. Oxygen barrier layers could be necessary in order to prevent the reduction of conversion efficiencies.

• Journal of Pharmaceutical Investigation
• /
• 제23권4호
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• Biomolecules & Therapeutics
• /
• 제5권1호
• /
• pp.53-58
• /
• 1997

$[Lys^7$]dermorphin, abbreviated K7DA, which has structural features similar to a metabolically stable $\mu$-opioid peptide agonist $[D-Arg^2, Lys^4$]dermorphin analogue (DALDA), but is intrinsically more potent with respect to binding to the $\mu$-opioid peptide receptor. The present studies report on attempts to enhance brain uptake of systemically administered K7DA by conjugation to a complex of streptavidin (SA) and the OX26 murine monoclonal antibody to the rat transferrin receptor, which undergoes receptor-mediated transcytosis through the blood-brain barrier (BBB). SA-OX26 conjugate mediates BBB transport of biotinylated therapeutics. The K7DA is monobiotinylated at the $\varepsilon$-amino group of the $[Lys^7$] residue with cleavable linker using NHS-SS-biotin. The brain uptake of $^{125}I$ labeled biotinylated K7DA ($^{125}I$-bio-SSa-K7DA) was very small and rapidly metabolized after intravenous injection. The brain uptake, expressed as percent of injected dose delivered per gram of brain, of the $^{125}I$-bio-55-K7DA bound to the SA-OX26 conjugate $^{125}I$-bio-SS-K7DA/SA-OX26) was 0.14$\pm$0.01, a level that is 2-fold greater than the brain uptake of morphine. The cleavability of the disulfide linker in vivo in rat plasma and brain was assessed with gel filtration HPLC and intravenous injection of labeled opioid chimeric peptides. The disulfide linker is stable in plasma in vivo but is cleaved in rat brain in vivo. In conclusion, these studies show that delivery of these potential opioid peptides to the brain may be improved by coupling them to vector-mediated BBB drug delivery system.

• 분석과학
• /
• 제5권1호
• /
• pp.135-142
• /
• 1992

태양열은 투과되고 인체 및 내부 열원에서 발생하는 적외선은 내부로 반사시키는 산화인듐 주석막은 수동 태양열 포집기로 사용되어 에너지 절약용 창유리로 활용된다. 졸겔 담금 코팅으로 제조된 산화 인듐 주석막의 선택 흡수 투과 특성의 막의 두께, 열처리 조건, 기판의 영향을 UV-VIS-IR spectroscopy를 이용하여 관찰하였다. 졸겔 담금 코팅막은 $500^{\circ}C$, 환원 분위기에서 열처리하면 고유의 산화 인듐 주석막이 형성된다. 알칼리 이온 확산 방지막은 $SiO_2-ZrO_2$막은 태양에너지 투과 효율을 증진시킨다. $SiO_2-ZrO_2/ITO$막은 태양 에너지의 투과를 유지시키고 파장 2700 nm 이상에서의 내부열 방출을 억제하여 에너지 절약 특성을 갖는다.

• 접착 및 계면
• /
• 제23권3호
• /
• pp.94-99
• /
• 2022

졸-겔 공정 및 용액 블렌딩 공정을 이용하여 삼성분계(그래핀/실리카/EVOH) 나노 복합 코팅 물질을 제조하였다. SEM 관찰 및 XRD 분석을 통하여 제조된 산화 그래핀의 삽입/박리 구조뿐만 아니라 나노 복합 물질 내에서의 그래핀 나노 판상체와 실리카 입자의 박리 구조 및 분산 상태를 확인하였다. 삼성분계 나노 복합 물질로 코팅된 BOPP의 산소 차단성은 산화 그래핀 및 실리카 입자를 일정 수준의 함량으로 첨가했을 때 이성분계(실리카/EVOH) 나노 복합 코팅 필름에 비해 뚜렷하게 향상되었나, 그 이상의 함량으로 첨가하면 불완전한 박리 및 그래핀 적층체의 분산과 실리카 클러스터의 미세 크랙 발생으로 인하여 차단성이 거의 일정하거나 또는 그 증가 폭이 매우 작은 것으로 나타났다. 또한 나노 복합 코팅 필름의 투명성은 그래핀 함량에 따른 필름의 광투과율을 측정함으로써 확인하였으며, 이러한 결과로부터 식품 포장 필름으로의 적용 가능성을 제시할 수 있었다.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.1001-1006
• /
• 2002

은이 피복된 Bi(2223) 단심 초전도 선재에 절연층으로 $SrZrO_3$ 피막을 졸-겔과 딥-코팅법으로 제조하여 $SrZrO_3$ 코팅층과 초전도 선재간 접착력 특성을 조사하였다. 실험인자로는 출발원료의 몰비, 유기화합물 첨가량, 건조온도 및 시간, 열처리 온도 및 시간이었으며 다구찌법의 망대특성과 $L_18(2^1{\times}3^7)$ 직교배열표를 이용하여 코팅층의 최적조건인 인자와 수준 조합의 최적화를 접착강도를 측정하여 분석하였다. 최적의 접착 특성을 가진 코팅조건은 Sr/Zr의 몰비가 0.3/0.7, 유기화합물 첨가량이 5wt%, 건조온도 및 시간은 160${\circ}C$ 10분, 열처리 온도 및 시간은 500${\circ}C$ 20분이었다. 분산분석 결과, 유의수준이 ${\alpha}$=0.1인 통계적으로 90% 신뢰공정이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.21-21
• /
• 2010

(Ba,Sr)$TiO_3$ (BST) thin film with a perovskite structure has potential for the practical application in various functional devices such as nonvolatile-memory components, capacitor, gate insulator of thin-film transistors, and electro-optic devices for display. Normally, the BST thin films derived from sol-gel and sputtering are amorphous or partially crystalline when processed below $600^{\circ}C$. For the purpose of integrating BST thin film directly into a Si-based read-out integrated circuit (ROIC), it is necessary to process the BST film below $400^{\circ}C$. The microstructural and electrical properties of low-temperature crystallized BST film were studied. The BST thin films have been fabricated at $350^{\circ}C$ by UV-assisted rapidly thermal annealing (RTA). The BST films are in a single perovskite phase and have well-defined electrical properties such as high dielectric constant, low dielectric loss, low leakage current density, and high breakdown voltage. Photoexcitation of the organics contained in the sol-gel-derived films by high-intensity UV irradiation facilitates elimination of the organics and formation of the single-crystalline phase films at low temperatures. The amorphous BST thin film was transformed to a highly (h00)-oriented perovskite structure by high oxygen pressure processing (HOPP) at as low as $350^{\circ}C$. The dielectric properties of BST film were comparable to (or even better than) those of the conventionally processed BST films prepared by sputtering or post-annealing at temperature above $600^{\circ}C$. When external pressure was applied to the well-known contractive BST system during annealing, the nucleation energy barrier was reduced; correspondingly, the crystallization temperature decreased. The UV-assisted RTA and HOPP, as compatible with existing MOS technology, let the BST films be integrated into radio-frequency circuit and mixed-signal integrated circuit below the critical temperature of $400^{\circ}C$.

• 산업기술연구
• /
• 제23권A호
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.863-870
• /
• 2017

With the increasing interest in using bacterial biofilms in geo-engineering practices, such as soil improvement, sealing leakage in earth structures, and hydraulic barrier installation, understanding of the contribution of bacterial biofilm formation to mechanical and hydraulic behavior of soils is important. While mechanical properties of soft gel-like biofilms need to be identified for appropriate modeling and prediction of behaviors of biofilm-associated soils, elastic properties of biofilms remain poorly understood. Therefore, this study investigated the microscale Young's modulus of biofilms produced by Shewanella oneidensis MR-1 in a liquid phase. The indentation test was performed on a biofilm sample using the atomic force microscopy (AFM) with a spherical indentor, and the force-indentation responses were obtained during approach and retraction traces. Young's modulus of biofilms was estimated to be ~33-38 kPa from these force-indentation curves and Hertzian contact theory. It appears that the AFM indentation result captures the microscale local characteristics of biofilms and its stiffness is relatively large compared to the other methods, including rheometer and hydrodynamic shear tests, which reflect the average macro-scale behaviors. While modeling of mechanical behaviors of biofilm-associated soils requires the properties of each component, the obtained results provide information on the mechanical properties of biofilms that can be considered as cementing, gluing, or filling materials in soils.