• Journal of Internet Computing and Services
• /
• v.19 no.2
• /
• pp.49-56
• /
• 2018

Internet news consumption is rapidly growing in Korea, and majority of that is being done through Naver, Korea's primary search engine. Naver is also the go-to search engine for smartphone use. This study analyzed 824 most popular news accessed via mobile gears; the news items were selected from Naver's 'Daily Top 10 Stories,' dating from March 2016 to December 2016. The results indicate that entertainment news were the most viewed, while political and social issue news were the most liked and commented by mobile users. With regard to news value, 'prominence' and 'impact' were the two most important factors that influenced a user's news selection process in a mobile environment. The degree of a news' 'prominence' was the most important factor that determined the number of views, while 'impact' was critical to determining "the most commented-upon" and "the most liked" news. The results also indicate that mobile news consumers prefer more dramatic storylines and events that incite public anger or grief, threaten the safety of citizens, or evoke emotional sympathy rather than 'hard news' about such subjects as politics and economics.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.81-88
• /
• 2011

Mini Double Gears Frame is critical part of PDP and also produces couple hundred thousand every month. In the process of mass production, product inspection is very important process. Double Gear, one of the part of machine, was inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. The focus value is measured based on the fact that high contrast images have much high frequency edge information. High frequency term of the image is extracted using the high-pass filter and the sum of the high frequency term is used as the focus value. We used a Gaussian smoothing filter to reduce the noise and then measures the focus value using the modified Laplacian filter called a Sum modified Laplacian Focus values for the various lens positions are calculated and the position with the maximum focus value is decided as the focused position. The focus values calculated in various lens position showed the Gaussian distribution. We proposed a method to estimate the best focus position using the Gaussian curve fitting. Focus values of the uniform interval lens positions are calculated and the values are used to estimate the Gaussian distribution parameters to find the best focus position.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.8-14
• /
• 2015

Transmission of a tracked vehicle designed for multiple functions such as steering, gear-shifting, and braking is a core component of heavy vehicle to which the power is transferred based on combined technology of various gears, bearing, and fluid machineries. Robustness and durability of transmission, however, have been issued due to a large number of driving units and sub-components inside its body. Particularly, transmission housing is important structure which supports the transmission, and is made of aluminum alloy. Thus, structural robustness against such mechanical loading or vibration must be attained. Structural reliability evaluation through FEM analysis can save time and cost of the actual tests. In this study, structural evaluation is conducted on output housing of transmission, which is core component of tracked vehicle, using the simulation program. In addition, transmission dynamo test is performed to evaluate structural robustness of the output housing against the vibration which can be produced during the transmission operation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.213-223
• /
• 2004

In the machine tool industry, direct drive linear motor technology is of increasing interest as a means to achieve high acceleration, and to increase reliability. The advantages of such a motor are that it has a good linearity and has no need of such mechanical energy conversion parts, which change rotary motion into linear motion, as screws, gears, chains etc In this paper, two structures of LOA are analyzed. One is the moving-coil type LOA and the other is moving-magnet type LOA. Two types of LOA are analyzed, with reference to the following parameters as variables: magnetic field, flux linkage, motor thrust and back emf. These variables are derived by the use of analytical method in terms of two-dimensional rectangular coordinate system. The maximum values of thrust according to such design parameters as air-gap length and magnet height for each model is also represented. The results are validated extensively by comparison with finite element method. In particular, we experiment moving-coil LOA which is already manufactured and confirm that the experimental results are shown in good agreement with analysis through the comparison of between analytical and experimental results

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.335-342
• /
• 2007

A propulsion and lift shafting system in an air cushion vehicle is flexible multi-elements system which consists of two aeroderivative gas turbines with own bevel gears, four stage lift fan reduction gear, two stage propulsion reduction gear air propellers and high capacity of lifting fans. In addition, the system includes the multi-branched shafting with multi-gas turbine engines and thin walled shaft with flexible coupling. Such a branched shafting system has very intricate vibrating characteristics and especially, the thin walled shaft with flexible couplings can lower the torsional natural frequencies of shafting system to the extent that causes a resonance in the range of operating revolution. In this study, to evaluate vibrational characteristics some analytical methods for the propulsion and lift shafting system are studied. The analysis, including natural frequencies and mode shapes, for five operation cases of the system is conducted using ANSYS code with a equivalent mass-elastic model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2017

Gear tooth micro-geometry modifications include the intentional removal of material from the gear teeth flanks, so that the shape is no longer a perfect involute. If the gear shapes are perfect, then the gear tooth meshing is better, therefore the gears will transmit input torque in a more efficient manner without the generation of high frequency engine fluctuation noise. In this paper, we study tooth micro-geometry optimization of rear gear set in 2 speed planetary gear reducers. Analysis revealed problems which are need of modification. Based on the results, tooth micro-geometry was used to deal with load distributions on the rear gear set.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.246-251
• /
• 2005

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_2$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.41-48
• /
• 2005

In recent years, the need for multi-stage gear drives which highly reduce output speed has been increased. However, the design of multi-stage gear drives has been carried out by a limited number of experts. The consideration for the direction of input and output axes also makes their design very difficult. The purpose of this study is to develop an algorithm for automatically generating complex multi-stage gear drives and to implement a design supporting system for multi-stage gear drives. There are 4 stages in the proposed algorithm, and major design parameters, such as the direction of input and output axes, reduction ratio, etc. are set up in the first stage. In the second stage, all mechanisms are generated, and various rules are applied to select feasible mechanisms. In the third stage, the gear ratio of each stage is divided from total gear ratio. Next, the specifications of gears for feasible mechanisms are calculated and their bending strength and surface durability are estimated. In the forth stage, appraised indexes are calculated and provided to support the estimation of the generated gear drives.

• The Journal of Fisheries Business Administration
• /
• v.39 no.2
• /
• pp.25-39
• /
• 2008

The Korean government is in the establishment process of plan for managing fishing effort by setting up the maximum fishing gear usage per fishery type for the recovery of fishery resources, for the settlement of disputes between fishery sectors over fishing gears, and for the stability of fishing business condition. Especially in the setting up of the maximum fishing gear usage, economic standards as well as biological standards are being considered as a significant factor to promote the sustainable and economically viable development of fisheries. This study is, thus, to analyze the optimal economic fishing gear usage ($E_{MEY}$) as the most economically efficient one for the coastal snow crab gillnet fishery, one of the most controversial sectors in establishing the maximum fishing gear usage. The data of logbooks per trip were used for concentrating on the estimation of $E_{MEY}$ per trip because it was considered there were limitations of data available for analyses. As a finding drawn from the analyses, the optimal economic trap usage ($E_{MEY}$) of coastal snow crab gillnet vessels per trip has to be decreased by about 13%. That is, reducing the trip gillnet usage up to the level of $E_{MEY}$ can lead to the reduction of trip fishing costs, thereby resulting in the increased trip profits.