• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1435-1440
• /
• 2008

High-speed train under development is a type of EMU(electric multiple units). Since power sources like motors and gears are distributed in the high-speed EMU, the high-speed EMU generates vibration and sound more than the articulated high-speed train. Vibration of vehicle, vibration between rails and wheels, hunting of bogie and snake motion reduce ride comfort. In this paper, to decrease the vibration of the articulated high-speed train, improvements were presented using an analytical model and a simulation model. The simulation model of the high-speed EMU was designed on the basis of the korean high-speed train and the design parameters for ride comfort were showed and the dynamic characteristics of the vehicle was understood. To consider the characteristics of the vehicle suspension, the analytical model was designed and the simulation model was verified with it.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.584-589
• /
• 2008

A bi-modal tram has been developing to consist of articulated-two cars propelled by CNG hybrid (series type) in Korea since 2003. All wheels are driven by electrical motors independently, which can eliminate differential gears to reduce turning radius and make low floor to provide the old and the handicapped with easy access. In the bi-modal tram, therefore, reduction gear unit is key technology to make low floor and drive wheels independently. This study was aimed at performance evaluations of the reduction gear unit for the bi-modal tram. Oil leakage, oil temperature, vibration, acoustic noise in idle operations were measured for the reduction gear unit of the bimodal tram.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.36-43
• /
• 2019

In this paper, the characteristics of the coaxial magnetic gear according to the shape of the same gear ratio are analyzed using the two - dimensional finite element analysis. The rotor shape is SMCMG, CPCMG and RCMG. After this we analyzed the characteristics according to three shapes. Also, the amount of permanent magnet used in each shape was compared. Next, characteristics analysis of the magnetic gear according to the shape at the same torque was performed. And the total weight and efficiency of the magnetic gears were compared and verified.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.49-58
• /
• 2019

Automatic transmissions are standard equipment in most automotive vehicles because they provide smooth speed shifting and a compact design with multiple speed ratios. Their structure consists mainly of planetary gear sets as power-transmitting devices and brakes and clutches as shifting devices. Several forward and one reverse speed ratios are achieved by actuating shifting devices to connect gears, input and output shafts, and the transmission case. In the development of a new transmission, kinematic configurations reflecting the transmission concept design are required, and the ability of the new concept design to be assembled without any interference among the connections must be demonstrated. In this study, an assemblability analysis of the kinematic configurations of a Ravigneaux-type automatic transmission was conducted with an assemblable example of an 8-speed Ravigneaux-type automatic transmission.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.34-42
• /
• 2022

Minimizing the backlash of gears and reducers is important for their proper and precise functioning. In this study, an automatic backlash measuring system was developed for the mass production and quality control of a military-grade reducer. The developed automatic backlash measurement system eliminates human error during the backlash measurement process. It also reduces the manufacturing time and digitizes the backlash number. The system was tested for an aircraft machine gun control reducer that required low-torque and high-precision conditions. The test results show that the torque range was 0.820-4.788 Nm. The maximum torque error is less than 0.231 N·m at 2.943 N·m, and 1.2 arcmin of the maximum backlash error with ± 0.3 arcmin of repeatability. The developed system satisfies all required conditions: torque of 1-3 Nm, torque accuracy within ± 0.5 N·m, and backlash accuracy of ± 3 arcmin.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_1
• /
• pp.529-536
• /
• 2023

In this study, the spur gear with honeycomb lattice structures are designed. The pitch diameter and body length of the spur gear are Ø93 mm and 104.0 mm, respectively. The designed gear was printed using Powder bed fusion (PBF) 3D printer. The gear is 3D printed perfectly. Even the teeth and honeycombs of the gear were output in the same way as the design shape. The printed gear with honeycomb lattice structure has a 24% smaller cross-sectional area and 29% smaller volume and weight than conventional solid structure gears. The surface roughness is approximately 4.5㎛, and the hardness is 345 HV.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.190-195
• /
• 2009

With the growth of information and communication technologies adoption in construction projects, it could be anticipated that more property owners and construction firms will attempt to use electronic gears and gadgets for site monitoring or surveillance purposes. As the construction workers may be the major group of project team members being monitored, from managerial perspectives and for ethical reasons, it is essential to investigate their degree of acceptance on site monitoring systems. Indeed studies on office workplace monitoring suggest that a monitoring system could shape or control the behaviors of employees. With adequate refinements, their research models could be applicable in the construction industry. This paper presents a model for analyzing the antecedences that affect workers' acceptance level on electronic monitoring, and investigating if there is any behavioral change.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.61-67
• /
• 1997

Hardened layer and compressive residual stress created by carburized treatment effect on bending strength of gear massively. Also, shot peening treatment improves the strength of carburized gear as it does the hardness and residual stress of surface layer. In these days shot peening techniques are welcomed as one of physical improvement ways around the surface of materials. It is used widely because qualitative analysis of shot peening has become possible and surface treatment can be done with very little costs comparaed to other surface improvement methods. Therefore this study investigates the effect of shot peening in surface shape and bending fatigue strength after doing many kinds of shot peening treatments, then doing fatigue test and also explained characteristics of shot peening gear.

• Korean Journal of Ecology and Environment
• /
• v.38 no.4 s.114
• /
• pp.482-493
• /
• 2005

The objective of this research was to evaluate an sampling effect of fish species and individual number on sampling techniques of electrofishing and conventional capture methods of cast net and kick net in 38 stream sites sampled during June - September, 2005. For the study, sampling gears were categorized as three types of electrofishing method (EM), conventional sampling technique (CM), and the combined technique (CT) of the electrofishing and the conventional method to compare statistical differences. Major differences of species composition between the CM and EM method were found in some benthic species of Misgurnus mizolepis and Iksookimia koreensis along with lithophilic species of Pungtungia herzi. These species were predominated in the EM rather than the CM, indicating that conventional sampling can underestimate the abundance of benthic or lithophilic species. In contrast ,individual number of typical water column species such as Zacco platypus and Zacco temmincki were more sampled by the CM, so that these fish populations were community overestimated. Also, t-tests on the types of sampling gear from various watersheds of Chogang Stream, Yugu Stream, Daejeon Stream, and Gap Stream showed that total individual numbers and species number in each stream were significantly (t values = 2.806-6.896, p values<0.05, n = 5-14) greater in the CT than the CM. Similar statistical significance (p<1.001, n = (10-24) on sampling seasons were observed during the monsoon and postmonsoon. These results indicate that if the electrofishing is not added to the conventional gears, the abundance of fish population and community can be underestimated and some benthic or lithophilic species may be excluded from the analysis, resulting in overall errors including sampling, fish fauna, and final judgement of community abundance. Overall our results strongly suggest that new application of electrofishing method along with the conventional sampling gears reduce sampling bias on underestimation of the real fish populations and communities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8700-8706
• /
• 2015

The first driving device of the power bogies for the Korean high-speed railway vehicle consists of the traction motor (TM) and the motor reduction gears unit (MRU). Although TM and MRU are the mechanically integrated structures, their time between overhauls (TBO) have two separate intervals due to different technical requirements(i.e. TBO of MRU: $1.8{\times}10^6km$, TBO of TM: $2.5{\times}10^6km$). Therefore, to reduce the unnecessary number of preventive maintenances, it is important to evaluate the optimal TBO with a viewpoint of reliability-center maintenance towards cost-effective solution. In this study, derived from the field data in maintenance, fault tree analysis and failure rate of the subsystem considering criticality of the components are evaluated respectively. To minimize the conventional total maintenance cost, the same optimal TBO of the components is derived from genetic algorithm considering target reliability and improvement factor. In this algorithm, a chromosome which comprised of each individual is the minimum preventive maintenance interval. The fitness function of the individual in generation is acquired through the formulation using an inverse number of the total maintenance cost. Whereas the lowest common multiple method produces only a four percent reduction compared to what the existing method did, the optimal TBO of them using genetic algorithm is $2.25{\times}10^6$km, which is reduced to about 14% comparing the conventional method.