• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.81-85
• /
• 2013

The stored-product insects have been a serious problem during the entire process of distribution on the food industry. Especially, the Indian meal moth (Plodia interpunctella) is one of stored-product insects which causes harm through penetrating into the food packaging. The objective of this study was to develop the anti-insect packaging material with fennel (Foeniculum vulgare) oil (FO). The FO has been selected for insecticidal substance against P. interpunctella, which was tested by fumigant toxicity assay. An anti-insect sachet was prepared by FO and filterpaper placed in a small paper bag. Repellent test was performed to evaluate the repellent activity of anti-insect sachet. In addition, the controlled release of FO from the anti-insect sachet was determined at $28^{\circ}C$ by gas chromatography (GC). It was demonstrated that FO was an effective substance against P. interpunctella. The mortality of FO was 56% at 800 mg/0.5 L in 120 h. In repellent test, the FO sachet showed effective repellency against P. interpunctella. The developed anti-insect sachet could be a promising source for insect repellent materials in food packaging.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.413-418
• /
• 2018

Cypress woods treated individually with boric acid (BA4), ammonium pentaborate (APB4), or BA4/APB4 additives were examined for combustion gases. Each of the specimens was painted with a 4 wt% solution of boron compounds three times. Dried at room temperature, the combustion gas was analyzed using a cone calorimeter (ISO 5660-1). Consequently, the second maximum oxygen consumption rate of the specimen treated with boron compounds was 0.1067 to 0.1246 g/s, which was 5.3 to 18.9%, respectively lower than that of the blank specimen. The specific extinction area of specimens treated with BA4 and APB4 was also 2.0 to 19.0% lower, respectively. However, treated with BA4/APB4 showed 21.2% higher than that of the blank specimen. The maximum carbon monoxide concentration of the specimens with boron compounds was reduced by 0 to 25%. It was estimated to be 1.6 to 2.2 times higher than the permissible exposure limits by Occupational Safety and Health Administration (OSHA), indicating a fatal toxicity. The boron compounds were effective in reducing carbon monoxide, but didn't meet the OSHA limit. The boron compound inhibited the burning behavior of the cypress wood, which suppressed the second maximum oxygen consumption rate by 5.3 to 18.9% and the maximum carbon monoxide generation by 0 to 25%.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.65-72
• /
• 2016

This study examined the generation of combustion toxic gases of pinus rigida specimens processed with bis-(dimethylaminomethyl) phosphinic acid (DMDAP), bis-(diethylaminomethyl) phosphinic acid (DEDAP), and bis-(dibutylaminomethyl) phosphinic acid (DBDAP). Each pinus rigida plate was coated three times with 15 wt.% flame retardants in an aqueous solution. The specimens were then dried at room temperature. The production of combustion toxic gases was investigated using a cone calorimeter (ISO 5660-1). The first time to peak mass loss rate ($1^{st}-TMLR_{peak}$) processed with the chemical additives decreased to 5.9 from 41.2% compared with the unprocessed specimen. The second time to the peak mass loss rate ($2^{nd}-TMLR_{peak}$) for the processed specimens was decreased 1.8% for DMDAP and 5.3% for DBDAP and increased 1.8% for DEDAP. The peak carbon monoxide ($CO_{peak}$) production was 1.5 to 2.0 times higher than that of the unprocessed plate. The peak carbon dioxide ($CO_{2peak}$) production was reduced 0.01 times for DMDAP and increased 1.15 to 1.19 times for DEDAP and DBDAP compared with the unprocessed specimens. In particular, the oxygen concentration was much higher than 15%, which can be fatal to humans and the resulting hazard can be eliminated. Overall, the combustion toxicity of flammable gas were increased partially by the chemical additives compared with those of the unprocessed plate.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.6-7
• /
• 1972

The air pollutants can be classified into the irritant gas and the asphixation gas, and the irritant gas is closely related to the otorhinolaryngological diseases. The common irritant gases are nitrogen oxides, sulfur oxides, hydrogen carbon compounds, and the potent and irritating PAN (peroxy acyl nitrate) which is secondarily liberated from photosynthesis. Those gases adhers to the mucous membrane to result in ulceration and secondary infection due to their potent oxidizing power. 1. Sulfur dioxide gas Sulfur dioxide gas has the typical characteristics of the air pollutants. Because of its high solubility it gets easily absorbed in the respiratory tract, when the symptoms and signs by irritation become manifested initially and later the resistance in the respiratory tract brings central about pulmonary edema and respiratory paralysis of origin. Chronic exposure to the gas leads to rhinitis, pharyngitis, laryngitis, and olfactory or gustatory disturbances. 2. Carbon monoxide Toxicity of carbon monoxide is due to its deprivation of the oxygen carrying capacity of the hemoglobin. The degree of the carbon monoxide intoxication varies according to its concentration and the duration of inhalation. It starts with headache, vertigo, nausea, vomiting and tinnitus, which can progress to respiratory difficulty, muscular laxity, syncope, and coma leading to death. 3. Nitrogen dioxide Nitrogen dioxide causes respiratory disturbances by formation of methemoglobin. In acute poisoning, it can cause pulmonary congestion, pulmonary edema, bronchitis, and pneumonia due to its strong irritation on the eyes and the nose. In chronic poisoning, it causes chronic pulmonary fibrosis and pulmonary edema. 4. Ozone It has offending irritating odor, and causes dryness of na sopharyngolaryngeal mucosa, headache and depressed pulmonary function which may eventually lead to pulmonary congestion or edema. 5. Smog The most outstanding incident of the smog occurred in London from December 5 through 8, 1952, because of which the mortality of the respiratory diseases increased fourfold. The smog was thought to be due to the smoke produced by incomplete combustion and its byproduct the sulfur oxides, and the dust was thought to play the secondary role. In new sense, hazardous is the photochemical smog which is produced by combination of light energy and the hydrocarbons and oxidant in the air. The Yonsei University Institute for Environmental :pollution Research launched a project to determine the relationship between the pollution and the medical, ophthalmological and rhinopharyngological disorders. The students (469) of the "S" Technical School in the most heavily polluted area in Pusan (Uham Dong district) were compared with those (345) of "K" High School in the less polluted area. The investigated group had those with subjective symptoms twice as much as the control group, 22.6% (106) in investigated group and 11.3% (39) in the control group. Among those symptomatic students of the investigated group. There were 29 with respiratory symptoms (29%), 22 with eye symptoms (21%), 50 with stuffy nose and rhinorrhea (47%), and 5 with sore thorat (5%), which revealed that more than half the students (52%) had subjective symptoms of the rhinopharyngological aspects. Physical examination revealed that the investigated group had more number of students with signs than those of the control group by 10%, 180 (38.4%) versus 99 (28.8%). Among the preceding 180 students of the investigated group, there were 8 with eye diseases (44%), 1 with respiratory disease (0.6%), 97 with rhinitis (54%), and 74 with pharyngotonsillitis (41%) which means that 95% of them had rharygoical diseases. The preceding data revealed that the otolaryngological diseases are conspicuously outnumbered in the heavily polluted area, and that there must be very close relationship between the air pollution and the otolaryngological diseases, and the anti-pollution measure is urgently needed.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.215-224
• /
• 2017

Arsenic (As) is known to be the most toxic element and frequently detected in groundwater environment. Inorganic As exists as arsenite [As(III)] and arsenate [As(V)] in reduced and oxidized environments, respectively. It has been reported that the toxicity of arsenite is much higher than that of arsenate and furthermore arsenite shows relatively higher mobility in aqueous environments. For this reason, there have been numerous researches on the process for oxidation of arsenite to arsenate to reduce the toxicity of arsenic. In particular, photooxidation has been considered to be simple, economical, and efficient to attain such goal. This study was conducted to evaluate the applicability of naturally-occurring goethite as a photocatalyst to substitute for $TiO_2$ which has been mostly used in the photooxidation processes so far. In addition, the effects of several factors on the overall performance of arsenite photocatalytic oxidation process were evaluated. The results show that the efficiency of the process was affected by total concentration of dissolved cations rather than by the kind of those cations and also the relatively higher pH conditions seemed to be more favorable to the process. In the case of coexistence of arsenite and arsenate, the removal tendency by adsorption onto goethite appeared to be different between arsenite and arsenate due to their different affinities with goethite, but any effect on the photocatalytic oxidation of arsenite was not observed. In terms of effect of humic acid on the process, it is likely that the higher concentration of humic acid reduced the overall performance of the arsenite photocatalytic oxidation as a result of competing interaction of activated oxygen species, such as hydroxyl and superoxide radicals, with arsenite and humic acid. In addition, it is revealed that the injection of oxygen gas improved the process because oxygen contributes to arsenite oxidation as an electron acceptor. Based on the results of the study, consequently, the photocatalytic oxidation of aqueous arsenite using goethite seems to be greatly feasible with the optimization of process.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.423-432
• /
• 2020

Objectives: In this study, we analyzed the current state of delivery containers and packages and established handling guidelines to safely transport delivery containers and packages for use in research, testing, and examination reagents. Methods: Handling guidelines were revised in such categories as maintenance of the handling facilities, storage, loading and unloading, containers and packages, transportation, etc. In addition, we analyzed the current state of domestic sales for hazardous chemicals used for research, testing, and examination reagents, and investigated the handling guidelines related to delivery transportation in the USA, EU, and Japan by chemical property. Results: There are 6,160 companies selling hazardous chemicals. Among them, the 476 companies selling reagents for use in research, testing, and examination were investigated. Total amounts handled reached 425,000 tons, contributing to 0.2% of the total. For delivery transportation, internal containers and packaging was specified for chemical properties as follows: within 1 L for flammable gas, within 5 L for flammable liquid, and within 18 L for others. In addition, the maximum size of the outer package was set within 130 cm for total length, width, and height, and no dimension of the packaging could exceed 60 cm. Sixty-four hazardous chemicals with explosiveness or acute inhalation toxicity were prohibited for delivery transportation. Conclusion: Specified handling guidelines for inner and outer containers as well as packaging were regulated for delivery transportation of hazardous chemicals used for reagents. In addition, 64 hazardous chemicals were prohibited for delivery transportation. These are designed to prevent transportation accidents involving hazardous chemicals for reagents and thus protect the safety and health of transporters who handle hazardous chemicals.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.3
• /
• pp.216-222
• /
• 2016

BACKGROUND: Polychlorinated biphenyls (PCBs) are one of the most common environmental contaminants. Because of their recalcitrant properties and long-term toxicity, numerous studies have been performed. The toxicological concerns are focused on endocrinological effects of animal. Several different metabolites have been reported, including hydroxy PCBs, PCB quinones, and methylsulfonyl PCBs from animal tissues. However, details in plants have never been studied. It is well-known that plants can produce phytoalexin in response to chemical, physical, or pathological stress.METHODS AND RESULTS: In this study, the several PCBs and hydroxy derivatives were prepared by chemical syntheses. Their effects on secondary metabolite biosynthesis were determined in carrot roots. The levels of 6-methoxymellein were determined in several different treatments, using gas chromatography-mass spectrometry. In general, the concentration of 6-methoxymellein reached a maximum at 2 days and gradually decreased to trace level at 5 days in control experiments. However, the effects of PCBs or hydroxy derivatives were highly dependent on compounds. For example, the maximum concentrations of 6-methoxymellein were observed at 3 days for 2-hydroxy/4-hydroxybiphenyl, while 3,3',4,4',5-pentachlorobiphenyl and 3,5-dichloro-2-hydroxybiphenyl showed a rapid accumulation within 1 day, followed by rapid dissipation to undetectable levels.CONCLUSION: Biphenyl derivatives were effective elicitor of 6-methoxymellein accumulation. In general, hydroxybiphenyls (phenols) more efficiently induced phytoalexin biosynthesis than those without hydroxy groups. It can be concluded that PCBs or their possible metabolites could change the plant secondary metabolism.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.4
• /
• pp.637-644
• /
• 1996

Interstitial pneumonitis associated with interferon alpha therapy for chronic hepatitis C was first describe6 in 1994 by Kazoo et al In Japan. The mechanism of interstitial pneumonitis developed by interferon alpha was still unknown but immunologic, allergic of direct lung toxicity were suggested. We experienced a case of interstitial pneumonitis developed during interferon alpha therapy for chronic hepatitis C in a 52-year-old male patient. He was treated with 6 million units of interferon alpha intramuscularly 3 times per week for 4 weeks and noted progressive dyspnea and cough. These symptoms were subsided after 6 weeks' discontinuation of interferon alpha therapy. And so, he was retreated with 3 million units of interferon alpha 3 times per week for 8 weeks and felt dyspnea again. He was admitted to our hospital for further evaluation of progressive dyspnea. Arterial blood gas(ABG) values were $PaO_2$ 90.7 mmHg and $PaCO_2$ 31.9 mmHg, and antinuclear antibody(ANA) was negative. A chest X-ray film revealed diffuse reticulo-nodular shadows in bilateral lung fields, suggesting a diagnosis of interstitial pneumonitis. A marked increase in lymphocyte count and suppressor T cell were observed in bronchoalveolar lavage(BAL) fluid. Lymphocyte stimulation test with interferon alpha was positive. Interstitial pneumonitis was confirmed by transbronchial lung biopsy. After discontinuation of interferon alpha, we gave oral steroid in the condition that clinical symptoms were being improved gradually.

• Journal of Korean Society of Forest Science
• /
• v.81 no.3
• /
• pp.234-246
• /
• 1992

This study was conducted to determine the toxic effects of air pollutants on landscaping tress, Pinus densiflora, Pinus koraiensis, Ginkgo biloba, Liriodendron tulipifera, Platanus occidentalis and their resistance to the pollutant toxicity in urban and industrial regions of Seoul and Taejon, Korea. Total sulfur contents and enzyme activities such as superoxide dismutase and peroxidase were analyzed in tree foliage of Pinus densiflora, Pinus koraiensis, Ginkgo biloba, Liriodendron tulipifera, Platanus occidentalis. In addition, POD activity was analyzed in the foliage on tree seedlings, i.e. Pinus densiflora, Pinus koraiensis, Ginkgo biloba, Lirioderdron tulipifera, with the fumigation of $SO_2$ in gas chamber 4 hours a day for six days. In Ginkgo biloba total sulfur content and POD activity had a negative correlation while other species had a positive relationship in total sulfur content and enzyme activity. Air pollutants accumulated in tree tissues were supposed to enhance the enzyme activity like POD providing the resistance mechanisms. Especially Pinus koraiensis and Platanus occidentalis had higher POD activity than other species. The increase of temporary POD activity against environmental stress appeared in sensitive trees and prolonged increase of POD activity played an important role in resistance mechanism. SOD and POD activities in all species had a positive correlation except Ginkgo biloba. Changes of SOD and POD activities were different between species and in most species SOD as well as POD seemed to participate in resistance mechanism.