• Journal of Advanced Marine Engineering and Technology
• /
• 제5권1호
• /
• pp.28-33
• /
• 1981

The characteristics of typical 35 kinds of domestic anthracites among 155 kinds are studied to find the calculation formula for the required quantity of air and the combustion gas quantity. 1) The author's calculation formulae are as follows: ${A_0}={\frac{1, 000}{1, 064}}{H_1}+0.086(Nm^3/kg)$ ${G_0}={\frac{1, 000}{1, 110}}{H_1}+0.234(Nm^3/kg)$(1) Theoretically required quantity of air (2) Theoretical quantity of combustion gas 2) Theoretical quantity of air in combustion of domestic anthracite is always estimated more with Rosin's formula than author's one in the typical domestic anthracites which have the lower calorific value between 3, 000-8, 000 Kcal/kg and the difference of the calculated quantity of air becomes small, as the calorific value increases. 3) Theoretical quantity of combustion gas is estimated more by author's formula than by Rosin's one with the domestic anthracites which have more calorific value than 6, 700 Kcal/kg and is estimated less in the under range of the above calorific value. 4) Theoretical quantity of required air and quantity of combustion gas of domestic anthracite show ${\pm}$4% difference by Rosin's formulae in comparison with results of actual analysis, and about ${\pm}$1.5% by the author's one.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.58-64
• /
• 2001

This study is to examine the emission quantity of $CO_2$ gas as the environmental load in office buildings. After the investigation of monthly consumption of each energy source(electricity and natural gas), it is analyzed that the $CO_2$ emission quantity of 34 office buildings surveyed is 22.4 kg-c/$m^2$-year, which consists of 17.5 kg-c/$m^2$-year by consurunlelectncif. and 4.9 kg-c/$m^2$-year by consuming natural gas. And the $CO_2$ emission quantity of each load in those buildings consists of 68% emitted by general electricity, 16% by cooling load and 16% by beating load. It is also proposed that the $CO_2$ emission quantity of cooling and heating load is profoundly pertinent to the variation of outdoor temperature.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.48-52
• /
• 2006

This study is a research of safety valve development for LP gas cylinder which use sintering metal. Re-searcher wishes to apply technology of sintering metal for safety valve development and do gas flow control. The basis of this study is most suitable fluid examination that to reduce gas accident. This research concluded following results. 1. When press pin length is 42mm to 45mm powder quantity is 0.25g, in case of press pin length 36mm to 42mm powder quantity is 0.2g, displayed fluid optimization. 2. When press pin length is 39mm and powder quantity is 0.25g, press pressure displayed fluid optimization at all interests from $1.2\;tons/cm^{2}\;to\;2\;tons/cm^{2}$. 3. When apparent density is about $5.0g/cm^{3}\;to\;4.5g/cm^{3}$, fluid optimization becomes.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.41-47
• /
• 2019

In conventional machining, the use of cutting fluid is essential to reduce cutting heat and to improve machining quality. However, to increase the performance of cutting fluids, various chemical components have been added. However, these chemical components during machining have a negative impact on the health of workers and cutting environment. In current machining, environment-friendly machining is conducted using MQL (minimum quantity lubrication) or cryogenic air spraying to minimize the harmful effects. In this study, the injection nozzle that can combined injecting minimum quantity lubrication(MQL) and cryogenic gas was designed and the shape optimization was performed by using computational fluid dynamics(CFD) and design of experiment(DOE). Performance verification was performed for the designed nozzle. The diameter of the sprayed fluid at a distance of 30 mm from the nozzle was analyzed to be 21 mm. It was also analyzed to lower the aerosol temperature to about 260~270K.

• 한국토양환경학회지
• /
• 제2권1호
• /
• pp.63-72
• /
• 1997

본 연구는 여러 종류의 매립지에서 발생가스를 측정하여, 다음과 같은 결론을 얻었다. (1) $CH_4$가스는 대부분 수직가스포집관에서 유출되며, $CO_2$가스는 총유출량의 약 50% 정도가 수직가스포집관을 통하여 유출된다. (2) 매립지 표면에서는 $CH_4$가스 보다 $CO_2$가스가 많이 유출된다. (3) 사면 복토층은 면적비율이 작으나 가스 발생량이 많으며, 특히 $CO_2$가스의 발생율이 높다. (4) 새로 반입된 쓰레기층 표면에서의 $CH_4$가스 발생량은 미소이므로 무시하여도 되나, $CO_2$ 가스 유출량이 많다. (5) 쓰레기층 노출, 복토층 다짐정도등에 따라 가스 발생량의 변화를 보인다. (6) 가스포집관과 복토 표면에서의 가스 유출량은 $CH_4$가스 유출이 많으나, 매립지 전체에서는 $CO_2$가스 유출량이 많다.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.707-713
• /
• 2003

We investigate the ultrasonic gas flow meter for the measurement of gas volume quantity, which passing through pipe, using the transit time difference method. We have designed a receiving system of an ultrasonic signal and hardware system of a flow meter Also, we have designed an experimental system for the characteristic test and calibration of a gas flow meter system. We have developed an ultrasonic gas flow meter, which has a measurement uncertainty within $\pm$ 1.7 %. For the test, we have compared our system with a difference pressure type flow meter for a few months in the real field. Through the test, we have confirmed that our system have a good reliability and durability. Also, we have confirmed that our system follows very well the variation of gas volume quantity, which was measured by a difference pressure type flow meter.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.121-128
• /
• 2006

The interaction between adherent molecules and gas molecules was modeled in the molecular scale and simulated by the molecular dynamics method in order to understand evaporation and removal processes of adherent molecules on metallic surface using high temperature gas flow. Methanol molecules were chosen as adherent molecules to investigate effects of adhesion quantity and gas molecular collisions because the industrial oil has too complex structures of fatty acid. Effects of adherent quantity, gas temperature, surface temperature and adhesion strength for the evaporation rate of adherent molecules and the molecular removal mechanism were investigated and discussed in the present study. Evaporation and removal rates of adherent molecules from metallic surface calculated by the molecular dynamics method showed the similar dependence on the surface temperature shown in the experimental results.

• 한국가스학회지
• /
• 제10권4호
• /
• pp.1-5
• /
• 2006

가스 소비의 급증으로 천연가스의 수송수단인 배관의 역할이 증가하고 있다. 일반적으로 배관으로 가스를 수송할 경우, 주로 컨덴세이트 형성에 기인하는 일부 액체가 관내에 형성되어 가스 산업현장에서 복잡한 조업 상의 문제점을 발생시킨다. 그러므로, 가스 컨덴세이트의 존재가 조업 효율에 미치는 영향을 예측할 수 있는 적절한 방법이 필요하다. 본 연구에서는 통합된 단상/2상 유동개념을 사용하여 가스 컨덴세이트의 발생 시작점과 그 발생량의 영향이 출구 압력에 미치는 영향을 분석할 수 있는 통계 모델을 개발하였다. 또한 컨덴세이트 발생 시작점 이후, 2상 유동지역에서 유동형태의 변화가 출구 압력에 미치는 영향도 분석되었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.90-96
• /
• 1999

In contracts for sales of natural gas between sellers and buyers, it is not suncient to only measure a volumetric quantity of gas in flowing conditions in metering station. Therefore the measured volumetric quantity must be converted to that of reference conditions. The density of the natural gas required in such a calculation can be measured directly or estimated from the equation of sate or any other experimental methods. The specific gravity meter is the apparatus used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.

• 대한공간정보학회지
• /
• 제22권1호
• /
• pp.55-62
• /
• 2014

현재 우리나라에서는 기후변화에 대응하기 위한 온실가스 감축을 위해 LED가로등 교체, 가로수 식수 등 다양한 개선사업들이 시행되고 있다. 그러나 대상 도시시설물에 대한 온실가스 배출량 및 흡수량에 대한 정보화가 이루어 지지 않아 기후변화 정책의 효과를 정확하게 분석하지 못하고 있다. 따라서 본 연구에서는 GIS를 이용하여 가로등 및 가로수의 탄소 관련 정보를 체계적으로 관리하기 위한 방안을 연구하고자 하였다. 도시시설물의 정확한 저탄소 정보 구축을 위해서는 시설물별 탄소배출량 및 흡수량 산정방법이 정립되어야 함을 알 수 있었다. 또한 GIS를 이용한 가로등 및 가로수의 저탄소 관련정보의 시각화는 기존의 온실가스 배출량 및 흡수량을 수치적으로 나타내는 것에 비해 기후변화 대응 정책의 효과를 쉽게 시각적으로 파악하고 체계적으로 관리할 수 있음을 알 수 있었다.