• 제목/요약/키워드: gas port

검색결과 321건 처리시간 0.027초

불꽃점화 엔진의 흡기관 분사를 위한 매립지가스 분사량의 측정 및 계산 (Measurements and Calculation of Injection Mass Rate of LFG for Intake Injection in Spark Ignition Engines)

  • 김경수;최경호;전원일;김바다;이대엽
    • 한국가스학회지
    • /
    • 제25권4호
    • /
    • pp.36-42
    • /
    • 2021
  • 쓰레기 매립지에 발생하는 매립지가스(Landfill gas)를 대기 중으로 방출할 경우에 매립지가스에서 많은 부분을 차지하고 있는 지구온난화 지수(global warming potential)가 높은 메탄가스를 배출하게 되어 기후변화에 악영향을 주게 되고, 매립지가스에 함유되어 있는 메탄을 내연기관의 연료로 활용하여 연소하여 발전을 하게 되면 이산화탄소 형태로 대기 중으로 배출하게 되어 온난화 지수를 낮추는 데도 기여를 할 수 있게 된다. 따라서 매립지가스를 내연기관을 이용한 발전용 연료로 사용하기 위해서 엔진의 열효율을 높이는 것이 중요하기 때문에 기존의 믹서 방식 기술을 이용한 연료공급 방식보다는 실린더별로 흡기포트에서 전자 제어 인젝터를 이용하여 기체 분사를 하는 방식의 연료공급 시스템을 사용하는 것이 필요하게 된다. 따라서 전자 제어 기체 분사 방식 기술을 이용하기 위해서는 매립지가스의 사용 조건에 따른 질량 유량을 정확히 측정하는 것이 중요하게 된다. 이를 위하여 본 연구에서는 매립지가스를 기체 분사할 경우에 분사량을 측정 및 계산하는 연구를 수행하였다.

포트각도에 따른 2행정기관 실린더내의 유동장 해석 (Analysis of the flow field in two-stroke engine cylinder of different intake ports angles)

  • 홍기배;최영진;유홍선;정인식
    • 오토저널
    • /
    • 제15권1호
    • /
    • pp.55-66
    • /
    • 1993
  • The characteristics of the flow processes in the cylinder of the two-stroke cycle engines have become the subject of increasing and attention owing to the simplicity and the higher power per unit weight of the two-stroke cycle engine. Among the many factors which influence on the scavenging flow, the port angle is important factor. Hence, four different type models with one inlet-port and two side-ports are studied to show the effect of port angle on the laminar scavenging flow. When the inlet-port axial is relatively larger than the side-port axial angle, it is showed that the fresh charge penetrate into the burned gas and displace it first toward the cylinder head and then toward the exhaust port. When the inlet-port axial angle is much less than the side-port axial angle, the fresh charge through the inlet-port directly move toward the exhaust port. The result showed that the model A may suppress the generation of vortices in the vicinity of inlet and side prots which restrict the sufficient supply of fresh charge and obstruct the perfect displacement of all combustion products.

  • PDF

배기 Hydrocarbon의 생성과정에 과한 실험적 연구 (An experimental study on the mechanism of hydrocarbon emissions)

  • 심현성;박찬준;이대운
    • 오토저널
    • /
    • 제13권3호
    • /
    • pp.25-31
    • /
    • 1991
  • The formation process of hydrocarbon emissions was investigated in SI engine. The time- resolved concentrations of hydrocarbon emissions were measured using a high gas sampling valve and a gas chromatography. The gas was sampled at exhaust port, or the position of spark plug, or the wall of combustion chamber. The experiments were conducted using the Alpha engine of Hyundai Motor Company. The fuel used was methanol or propane. It was found that the effect of the quenching layer of combustion chamber wall on hydrocarbon emissions was not significant. The increasing rate of hydrocarbon concentration at combustion chamber wall near crevice and oil layer after flame was reached was much higher than that at the position of spark plug. The hydrocarbon concentrations at exhaust port had two peak values just after opening exhaust valve and just before closing it.

  • PDF

Gas-Flow Sensor using Optical Fiber Bragg Grating(FBG)

  • Shim, Joon-Hwan;Cho, Seok-Je;Yu, Yung-Ho;Sohn, Kyung-Rak
    • 한국항해항만학회지
    • /
    • 제32권9호
    • /
    • pp.717-722
    • /
    • 2008
  • We have proposed and demonstrated an gas-flow sensor using optical fiber bragg grating(FEG). The flow sensor has no electronics and no mechanical parts in its sensing part and the structure is th11s simple and immune to electromagnetic interference(EMI). The FEG sensor was consisted qf the sensing element and a coil heater. The metal coil was used to supply the current to the FEG. While some currents supply to the coil, the refractive index of the FEG under the coil is changed and thus the wavelength shift of fiber optic sensor was induced In this work, the wavelength shift according to flow-rate was experimentally studied and was used to evaluate the gas flow-rate in a gas tube. As a result, it was possible to measure the flow-rate in a linear range from 5 to $20{\ell}/min$ with a resolution of approximately $1{\ell}/min$ at the applied currents of 100 mA and 120 mA. The measured sensitivities were $15.3\;pm/\ell/min$ for 100 mA and $20.2\;pm/\ell/min$ for 120 mA.

벌크선박과 유조선의 온실 가스 배출 인벤토리 분석 (An inventory analysis on greenhouse gas emissions from bulk carrier and oil tanker)

  • 임남균;이승룡
    • 한국항해항만학회지
    • /
    • 제34권3호
    • /
    • pp.189-194
    • /
    • 2010
  • 최근 지구 환경 문제의 심각성이 대두되면서, 전과정 평가(Life Cycle Assessment)에 대한 선박 적용 연구가 조금씩 진행되고 있다. 본 논문에서는 선박 LCA 연구의 일환으로 선박 배기 가스 분석을 수행하였다. 이를 위하여 화물선에 대한 온실 배기 가스 배출 분석을 수행하였다. 대상 선박은 벌크선박과 유조선 등 2척을 모델로 삼았으며 과거 수년간의 실적 데이터를 분석하여 운항인벤토리 중 온실 배출가스의 정략적 데이터를 분석하였다. 이 분석을 통하여 화물선 운송 시 화물 1톤을 1마일 수송하는데 배출되는 배기 가스량의 분석을 시도하였다.

보조 흡입구가 장착된 왕복동 압축기의 성능 분석 (Performance of a Reciprocating Compressor Equipped with Auxiliary Port)

  • 이용호;김현진
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.163-170
    • /
    • 2008
  • Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

  • PDF

보조 흡입구가 장착된 왕복동 압축기의 성능 분석 (Performance of a Reciprocating Compressor Equipped with Auxiliary Port)

  • 이용호;김현진
    • 설비공학논문집
    • /
    • 제20권10호
    • /
    • pp.637-644
    • /
    • 2008
  • Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

평택.당진항의 화물유동에 의한 항세권의 계층성 (Hierarchy of the Influence Areas by Freight Flows in Pyeongtaek and Dangjin Port, Korea)

  • 한주성
    • 대한지리학회지
    • /
    • 제46권6호
    • /
    • pp.751-766
    • /
    • 2011
  • 본 연구는 평택 당진항을 대상으로 화물수송량에 의한 밀집도로 항세권의 계층성을 파악하고, 항만의 수출입량 증대를 위한 활성화방안을 알아보고자 한다. 중국과의 무역증대를 예상하여 건설된 평택 당진항은 자동차, 천연가스를 주축으로 수출입하는 항구로서의 기능이 더욱 강화되어 배후지와 지향지의 항세권은 확대되고 있으나 여전히 반경 70km의 핵심권에서 무역량이 많아 전국적인 항만으로 나아가는 데는 항로의 다변화와 더불어 여러 지역의 화주와 운송업자 및 선사로부터 인정받는 항만의 활성화 정책이 실행되어야 국제적 중심 항으로서의 위상과 기능이 제고될 것이다.

Air Pollution Reduction Strategies of World Major Ports

  • Han, Chul-Hwan
    • 무역상무연구
    • /
    • 제48권
    • /
    • pp.27-56
    • /
    • 2010
  • Pollution emissions from international shipping and port activities have a significant impact on public health and global climate changes. The purpose of this paper is to review the status of pollution mitigation measures implemented to date in port industry and find out some implications for Korean ports. For this aim, the clean air strategies of the world major ports including six USA ports (Los Angeles/Long Beach, Now York/New Jersey, and Seattle and Tacoma), two European ports (Rotterdam and Gothenburg) and Busan Port were considered. Various measures to reduce emission from ports are evaluated by sectors-ocean going vessels, cargo handling equipments, truck and rail-, on the basis of categories such as reduction control technologies, operational changes and market-based measures. The policy implications of this paper are as follows. First, Clean Air Act Plans of Korean ports are required as soon as possible. Second, integrated approach is required to reduce emission effectively. Finally, the effect of port-related emission reduction can be maximized when various measures are conducted on a regional basis including neighboring ports. Furthermore, regional or global-based approach is useful to guarantee the level playing field among ports.

  • PDF

A Study on Optimum Pressure Vent of Experimental Booth by Gas Explosion

  • Leem, Sa-Hwan;Lee, Jong-Rark;Huh, Yong-Jeong
    • 한국가스학회지
    • /
    • 제11권4호
    • /
    • pp.59-63
    • /
    • 2007
  • The purpose of this paper is to find optimum vent port of the booth for gas explosion experiment. Also, it is to understand the safety of the booth for explosion experiment which is installed to let the trainees for legal education which is managed by IGTT(Institute of gas technology training) blow the riskiness of explosion. Since the booth for gas explosion experiment is a confined space, we used the exhaust model for indoor explosion. As the result, it was safety calculated when the amount of leaking gas was close to the maximum of explosion limit on the explosion experiment.

  • PDF