• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• 복식문화연구
• /
• 제20권3호
• /
• pp.403-415
• /
• 2012

This study did a comparative analysis on the patterns of several male bodice slopers, followed by evaluating the appearance through a virtual garment simulation, which used a three-dimensional virtual garment system. Through this process, this study attempted to comparatively analyze the suitability of the garment or each sloper according to body parts. The analysis of the drawing formulas of bodices slopers had the following results. With a standard chest size, all six slopers had a 1:4 ratio for a front and back chest size; 1:5 or 1:6 for a front and back breast size 1:5 or 1:4 for a neck base circumference; and 1:20 or 1:12 for the chest size. When comparing the anthropometric figures and the actual measurements of each body part for the bodice slopers, the actual measurements secured extra amounts in the drawing process. The evaluation results for appearance of the six men's bodice slopers showed that the slopers used by companies (E and F) had top scores followed by the slopers made for (C and D), while the sloper for education (A) received the lowest scores. Regarding the results of the variance analysis verifying the significant difference between the slopers, twenty-five items had significant differences with the exception of four items on the front side and one item on the backside.

• 문화기술의 융합
• /
• 제2권3호
• /
• pp.15-22
• /
• 2016

본 연구는 20대 여성에 대한 재킷의 실제착의와 컴퓨터 시뮬레이션으로 재현된 가상착의 상태를 디자이너 집단과 패터너 집단이 비교 분석하여 가상착의 시스템의 개선 방향을 제시하는 것을 목적으로 수행되었다. 착의 방식에 따른 디자이너 집단의 외관평가 차이 분석에 있어서 앞면에 대한 개 항목 옆면에 대한 개 항목 뒷면에 대한 1개 항목 소매에 대한 개 항목 칼라에 대한 개 항목에서 평가에 대한 차이가 있었다. 착의 방식에 따른 패터너 집단의 외관평가 차이 분석에 있어서 옆면에 대한 개 항목 뒷면에 대한 개 항목 소매에 대한 개 항목 칼라에 대한 개 항목에서 평가에 대한 차이가 있었으며 모든 항목에서 가상착의의 모습이 더 아름답다고 하였다. 착의 방식에 따른 외관평가에 있어서 디자이너 집단과 패터너 집단의 평가가 차이가 있었으며 이는 디자이너 집단과 패터너 집단이 의복의 맞음새를 평가하는 기준이 다르다는 것을 시사한다.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.218-229
• /
• 2014

The wearing comfort of garment is governed by two kinds of characteristics such as moisture and thermal transport properties and mechanical properties of fabrics. The porosity influenced by yarn and fabric structural parameters is known as main factor for wearing comfort of garment related to the moisture and thermal transport properties. This study investigated effect of porosity of composite yarns to the moisture and thermal comfort properties of composite fabrics made of hollow composite DTY and ATY yarns. The theoretical porosity and pore size were inversely proportional to cover factor of fabric, but cover factor was not correlated with experimental pore size. The wicking property of hydrophobic PET filament fabric showed inferior result irrespective of porosity, pore size and cover factor. The drying rate was superior at composite fabrics with high pore size and low cover factor, and pore size was dominant factor for drying property. On the other hand, thermal conductivity of composite fabric was mainly influenced by cover factor and not influenced by porosity. Air permeability was influenced by both porosity and cover factor and was highly increased with increasing porosity and decreasing fabric cover factor.

• 복식
• /
• 제63권3호
• /
• pp.95-109
• /
• 2013

This thesis was conducted with the purpose of proposing a systematic and comprehensive system for women's upper garment sizes so that the satisfaction level of women purchasing the upper garment products in Internet shopping malls is enhanced. To achieve this, this study first conducted a survey of women from the ages of 18 to 39 and attempted to discover consumer satisfaction levels and preferences of the clothing product sizing system of Internet shopping malls. While keeping track of the global distribution environment, an optimal clothing sizing system for Korean women that fit recent changes in their body shapes was proposed. The results of this study are as follows. First, A result of studying the satisfaction levels and preferences of consumer's purchase experience and the sizing system showed that 48.6% of the total respondents were dissatisfied with the current sizing system. Second, based on the research of the size classification system of domestic and foreign upper garment for women, unlike domestic Internet shopping malls, overseas generally offer several size classifications. Third, results of studies 1 and 2 was used to propose an optimal clothing products sizing system method. Also, the body and product sizes and the measurement methods should be offered together. In summary of all these results, by establishing globally compatible sizing system, consumers are able to recognize their sizes on their own and by doing this, it will lower perceived risk of the consumers at the time of a Internet shopping mall purchase, and this will raise their level of satisfaction while making purchases.

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.658-667
• /
• 2016

The purpose of this study is 1) to research how practitioners in fashion industry in South Korea perceive concepts of Technical Design/Designer, 2) to compare and analyze issues at work by occupation, 3) to research specific works in garment development process, and 4) to compare and analyze work involvement by occupation, type of a company and etc, and 5) to propose the role of Technical Designers in apparel companies in South Korea. There were two methods to conduct this study, which were in-depth interview and survey. Both methods were conducted to designers, merchandisers, pattern makers, technical designers, and production coordinators. Frequency analysis, ANOVA, Duncan test, and Factor analysis were performed to get results by using SPSS 18.0 program. The results are following. There were 50 works during garment development process from the result of in-depth interview, and 6 factors were obtained from the result of Factor analysis, which were 'Works about Sample in Sample Development Process', 'Works about Product's Pattern and Size Spec', 'Works about Development of Garment's Design', 'Works about Planning of Product Development and Management of Product in Stock', 'Works about Production Process', and 'Preparation Works for Sample Development'. In conclusion, technical designer in apparel companies in South Korea should be in charge of works about sample in sample development process and decision making of product' size spec, which is included in works about product's pattern and size spec. Also, they should complete technical package after product is developed by designers.

• 복식문화연구
• /
• 제3권2호
• /
• pp.307-321
• /
• 1995

The purpose of this study is to make the size chart of the child's ready-made upper garnet. For his study, we used the 1992 national anthropometric database. The results obtained are as follows. (1) It is known that the bust girth-based size chart is better than the age-based one. (2) The size range of the bust girth was 55∼73 cm to the size of the child's upper garment, and the number of the size was 7. Then the cover-rate was 86%. (3) In this study, the unisex chart was newly made because it was hardly difficult to find the actual size difference between boys and girls.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.88-98
• /
• 2005

This study focuses on the needs at both consumers and manufacturers. It aims to find ways for consumers to purchase outfits that would fit their particular body type and preferences at reasonable prices, choose raw materials and style at garments, and virtually try them on. In addition, the study is designed to help apparel manufacturers identity customers' changing needs, reduce inventories, manage information on customers' body type in a digitalized form, and eventually contribute to promoting electronic commerce. Based on nine basic patterns that tit each subject, 108 virtual garments are created by adjusting the size of the patterns (9 subjects $\times$ 4 body parts $\times$ 3 patterns = 108 outfits). In order to determine fitting preferences for each body part and find optimized conditions, cross-tabulation analysis including $X^2$ and frequency analysis were performed to measure the appearance rate. A style of virtual garment, which is minus 2cm from chest size was chosen as the most appropriate pattern to the baseline location of front the chest. For the waist parts, the C style as an appropriate virtual garment to front and back view. In the front, lateral and back view, a style was chosen in the response to the sleeve-bodice combinations, the ease amount of armhole area, the armhole depth and the loosening of tightening or armhole line.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.1-12
• /
• 2020

It is essential to apply compression bands or pressure garments that can stabilize the breast implants and breast shape as well as help shape the breast to the desired shape immediately after breast augmentation surgery. It is necessary to study the compression garment which is able to properly cover a deformed breast due to the operation and shape it as a beautiful breast. The subjects of the study were 6 women who experienced breast augmentation surgery with an under bust size of 70 or 75, cup size of C cup with a hemispherical and conical shape. We analyzed the dissatisfaction and satisfaction factors through the evaluation of the 4 types of commercial compression garments and developed the new functional post-operative bra which can be worn immediately after the operation according to the breast characteristics of breast augmentation patients. We have developed new bra patterns; a front opening type garment with wings and a band type garment both sides that allow the band to be pressed from the front center. The comparative wearing evaluation indicated that the superiority of the new compression garments also provided a higher the satisfaction of the newly developed bra (front adjustable style) than a commercial band.

• 복식문화연구
• /
• 제1권2호
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).