• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.189-202
• /
• 2019

This study develops a bodice pattern for high school girls aged 17 to 19 that use virtual garment simulation. The study developed a bodice pattern based on the fit evaluation result for two selected bodice patterns. The basic formula of the design method based on the result of 3 times of fit evaluation is as follows: waist back $length=stature/8{\times}1.85cm$, waist front length=waist back length+bust/40+0.7cm, front bust girth=bust/2+4cm, back bust girth=Chest/2+3cm, armscye depth=Chest/4+0.5cm, back interscye length=bishoulder length -1.2cm, front interscye length=back interscye length -1.2cm, front neck width=back neck width -0.3cm. The developed bodice pattern used Bishoulder Length as a criteria for the calculation formula of back interscye length, and back interscye length as a criteria for the calculation formula of front interscye length. The fit evaluation showed the relevance of the bishoulder length, front interscye length, and back interscye length based on a comparison of the calculated figure. A bodice pattern with great body suitability and fitness to high school girls was developed through 3D virtual garment simulation that calculated the application of body proportion to width. This study only analyzed the evaluation result of a virtual model only in a representative form; however, a pattern study is also proposed to compare and analyze the design methods of patterns by body type.

• The Research Journal of the Costume Culture
• /
• v.30 no.3
• /
• pp.366-380
• /
• 2022

This study aims to develop the designs and patterns of yoga tops that are better adjusted to suit females in their 30s and 40s. After conducting a comparative analysis of three different popular yoga garments, one yoga top currently on the market was selected. Subsequently, a fit evaluation was conducted on Trail 1-garment α, which was developed body analysis performed based on selected yoga top C, followed by the production of the Trial 2 garment after making adjustments according to the comparative observation results. Based on these results, garment C with the longest top length was evaluated as the best. The results of the evaluation of appearance and fit conducted of Trial 1-garment α compared to those of C showed that Trial 1-garment α was superior in both evaluations. Trial 2-garment β was produced after making improvements on Trial 1-garment α and then placed under identical comparative evaluation condition as Trial 1-garment α. Results showed a significant improvement compared to Trial 1-garment α, and the Trial 2 garment with an additional arm pattern was shown to be superior in shoulder strap width stability, shoulder strap pressure, chest stability, degree of waist pressure, waist comfort, general fitting, and supportiveness.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.88-98
• /
• 2005

This study focuses on the needs at both consumers and manufacturers. It aims to find ways for consumers to purchase outfits that would fit their particular body type and preferences at reasonable prices, choose raw materials and style at garments, and virtually try them on. In addition, the study is designed to help apparel manufacturers identity customers' changing needs, reduce inventories, manage information on customers' body type in a digitalized form, and eventually contribute to promoting electronic commerce. Based on nine basic patterns that tit each subject, 108 virtual garments are created by adjusting the size of the patterns (9 subjects $\times$ 4 body parts $\times$ 3 patterns = 108 outfits). In order to determine fitting preferences for each body part and find optimized conditions, cross-tabulation analysis including $X^2$ and frequency analysis were performed to measure the appearance rate. A style of virtual garment, which is minus 2cm from chest size was chosen as the most appropriate pattern to the baseline location of front the chest. For the waist parts, the C style as an appropriate virtual garment to front and back view. In the front, lateral and back view, a style was chosen in the response to the sleeve-bodice combinations, the ease amount of armhole area, the armhole depth and the loosening of tightening or armhole line.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.799-809
• /
• 2000

This study was designed for automated pattern drawing and grading a man's Durumagi, Korean traditional coat in order to reestablished and grade the pattern by Apparel CAD SYSTEM. For the study, AM-250 systems of Gerber as the computer and Macro program as the automated drawing were used. Also, PDS(Pattern Design System) was used for the grading of the original Durumagi pattern. Results were followings; First, the size data that could be standardized by reestablishing the pattern of a man's Durumagi by each size was presented. Second, The pattern was developed by each size. Third, new design was propose for mass production with the traditional design of the DURUMAGI Fourth, The time for making DURUMAGI pattern and the cost through the automated drawings by using the Macro program were reduced. Moreover, was presented the basic data for a ready to made garment like the Western garment. Five, A man's DURUMAGI by CAD System was graded that could be applied to ready to made Hanbok

• Journal of the Korean Society of Costume
• /
• v.59 no.8
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.303-304
• /
• 2007

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.52-68
• /
• 2012

To achieve the aim of this study, 9 different types of samples were made to examine mechanical property according to structured pattern and type of Machi of pullover armhole of WholeGarment(seamless knitwear). With respect to samples, from which comparisons are made and anaylzed among basic characteristics of material, tensile strength & elongation and residual elongation due to repeated extension of armhole connecting part, the following conclusions could be obtained. It's revealed that the tensile strength of Machi part as being armhole connecting part of samples is more affected by Machi type than pattern structure. Of Machi types, it showed stronger tensile strength in the order of Normal(Normal Machi)< Machi_B(unilateral Machi)

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.658-667
• /
• 2016

The purpose of this study is 1) to research how practitioners in fashion industry in South Korea perceive concepts of Technical Design/Designer, 2) to compare and analyze issues at work by occupation, 3) to research specific works in garment development process, and 4) to compare and analyze work involvement by occupation, type of a company and etc, and 5) to propose the role of Technical Designers in apparel companies in South Korea. There were two methods to conduct this study, which were in-depth interview and survey. Both methods were conducted to designers, merchandisers, pattern makers, technical designers, and production coordinators. Frequency analysis, ANOVA, Duncan test, and Factor analysis were performed to get results by using SPSS 18.0 program. The results are following. There were 50 works during garment development process from the result of in-depth interview, and 6 factors were obtained from the result of Factor analysis, which were 'Works about Sample in Sample Development Process', 'Works about Product's Pattern and Size Spec', 'Works about Development of Garment's Design', 'Works about Planning of Product Development and Management of Product in Stock', 'Works about Production Process', and 'Preparation Works for Sample Development'. In conclusion, technical designer in apparel companies in South Korea should be in charge of works about sample in sample development process and decision making of product' size spec, which is included in works about product's pattern and size spec. Also, they should complete technical package after product is developed by designers.

• Journal of the Korean Society of Costume
• /
• v.59 no.9
• /
• pp.16-25
• /
• 2009

The purpose of this study is to develop pattern of a Upper Garment Prototype for late elementary school aged girls. The body of late elementary school aged girls changes steadily up to the adult and is characterized by its periodic noticeable physical distinctions. This study is selected a test pattern from 3 existing patterns through a preliminary wearing test, conducted wearing tests, and sensory evaluations three times to review and improve the pattern, and presented the pattern of late elementary school aged girls. The research pattern was developed considering aesthetic and functional aspect. The average score of sensory evaluation on appearance was 4.13 for the research pattern, which was higher than 2.74 for the test pattern. The according to the results of verifying significant differences in the test items between the two patterns through the t-test, in the items such as pleats in the line of a waist, the ease of the girth of a waist, the location of shoulder line was superior to the test pattern. The average score of the sensory evaluation on functionality was 4.91 for the research pattern, which was higher than 3.90 for the test pattern. The research pattern is superior to the test pattern in static posture, dynamic posture than the test pattern.