• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.69-80
• /
• 2005

A synthesis of azide-terminated glycidyl azide polymer, GAP-A, was carried out by tosylation and azidation of polyepichlorohydrin(PECH) prepared by cationic ring-opening polymerization. Polyepichlorohydrin was prepared by cationic activated monomer polymerization using ethylene glycol and $BF_3{\cdot}OEt_2$ as an initiator and a catalyst at $\~10^{\circ}C$. Tosylation of polyepichlorohydrin was performed using traditional TsCl/pyridine method and was also carried out using TsCl/amine catalysts to reduce the reaction time significantly. Azidation of tosyl-terminated PECH(OTs-PECH) was performed using $NaN_3$ as an azidation reagent in DMF solvent at high temperature and was unexpectedly completed within 2 hours.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
• /
• pp.330-330
• /
• 2003

Several volcanics are found within the Tertiary sedimentary basins, southeastern part of Korea. The sedimentary basins have been interpreted to have formed in the framework of separation of the East Sea. The volcanics are Eocene or Early and Middle Miocene in ages, showing a distincetve chronological gap, and show mafic and silicic (bimodal) in composotion. The Miocene volcanics were regionally and stratigraphically grouped into two varieties along the Hyeongsan fault; younger volcanics (13.6-15.2 Ma, K) from the north of the fault, erupted after the opening of the East Sea, and older volcanics (16.2-21.1 Ma) from the south of the fault. (omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1204-1206
• /
• 2005

This paper deals with magnetic field analysis and computation of cogging torque in IPM motor with an analytical method, which is based on the Conformal Mapping technique. The magnetic field is analyzed by solving space harmonic field analysis due to inserted PM magnetizing distribution. Conformal Mapping method is then used for considering the slot opening effect and rotor saliency effect on the air-gap field magnetic distribution. Then, by integrating the field over the stator surface, cogging torque is calculated. The validity of the proposed analytical method is confirmed by comparing the results with 2-D FEA results.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.12-25
• /
• 2017

국내 석회석광산은 주로 자연통기에 의존하고 있으나 자본 및 운전비용이 과다하게 소요되는 광산 전체통기방법보다 풍관과 선풍기를 이용한 국부통기방법이 바람직한 방법으로 평가된다. 국내 대단면 장대 광산갱도에 풍관이 접속된 국부선풍기를 직렬로 연결 설치하는 경우에 통기시스템의 경제성과 효율의 최적화가 반드시 요구된다. 최적화를 위한 가장 중요한 두가지의 설계변수는 벽면 이격거리와 풍관 간의 이격거리이다. 본 연구에서는 경제적 및 환경적으로 최적화된, 즉 풍관간의 이격 공간을 통한 압력손실, 누기 그리고 오염된 공기의 재유입을 최소화할 수 있는 두 설계변수 값을 도출하기 위하여 광범위한 CFD분석을 시행하였다. 기존 연구결과와 권고기준들을 고려하여 이들 변수의 연구대상 범위를 선정하였다. 본 연구의 궁극적 목표는 국내 장대 광산갱도내 설치되는 풍관 접속 선풍기의 직렬연결 국부통기시스템의 최적화를 통하여 깨끗하고 안전한 작업장 환경을 제공하기 위함이다.

• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.156-165
• /
• 2020

본 논문은 주거형태를 가지는 건축물의 성능위주설계 시 수행되는 피난 지연시간(인지 시간 + 개시 시간)의 적용과 세대 내 방화문의 개방 정도가 피난 안전성 평가에 어떠한 영향을 미치는지 파악하고 현실적 대안을 제시하기 위한 논문이다. 본 연구를 수행하기 위해 먼저 2018년 6월까지 시행되었던 광주광역시의 성능위주설계 대상 건축물 중 주거형태를 가지는 건축물(공동주택, 도시형생활주택 등)의 피난 안전성 평가에 대해 선행 조사를 하였다. 그런 다음 선행 조사된 건축물 중 일반적으로 많이 사용되고 있는 2가지 대표적인 Type에 대해 피난 지연시간은 W1, W2를 적용하고 방화문의 개방 정도는 전체개방, 1/4 개방, 누설 틈새를 각각 적용하여 시뮬레이션한 다음 피난 안전성 평가를 수행하였다. 피난 안전성 평가의 수행결과 방화문 개방 정도가 전체개방 및 1/4 개방 상태에서 사생활 침해 등을 고려하여 피난 지연시간 W2를 적용한 경우에는 피난 안전성을 모두 확보하기 어려운 것으로 나타났으며, 누설 틈새를 적용한 경우에만 피난 지연시간 W2를 적용해도 피난 안전성이 확보되는 것으로 나타났다. 따라서, 주거형태를 가지는 건축물이 성능위주설계 대상이 될 때 피난 안전성 평가 수행 시 CCTV 설치 등으로 사생활 침해 등의 우려가 있는 국내 현실을 반영하여 피난 지연시간은 W1보다는 W2의 적용을 검토하고 방화문의 차연성능 확보 및 성능위주 설계의 고도화를 위해 방화문의 개방 정도에 누설 틈새를 적용하는 방안도 함께 검토해 줄 것을 제안하고자 한다. 이를 통해 성능위주 설계 시 좀 더 현실화된 자료로 피난 안전성 평가를 수행함으로써 한 단계 더 발전된 성능위주설계가 될 것으로 기대된다.

• 대한치과교정학회지
• /
• 제49권6호
• /
• pp.413-426
• /
• 2019

This study was performed to describe the longitudinal management of recurrent temporomandibular joint (TMJ) ankylosis from infancy to adulthood in perspective of surgical and orthodontic treatment. A 2-year-old girl was referred with chief complaints of restricted mouth opening and micrognathia due to bilateral TMJ ankylosis. For stage I treatment during early childhood (6 years old), high condylectomy and interpositional arthroplasty were performed. However, TMJ ankylosis recurred and symptoms of obstructive sleep apnea (OSA) developed. For stage II treatment during early adolescence (12 years old), gap arthroplasty, coronoidectomy, bilateral mandibular distraction osteogenesis, and orthodontic treatment with extraction of the four first premolars were performed. However, TMJ ankylosis recurred. Because the OSA symptoms reappeared, she began to use a continuous positive airway pressure device. For stage III treatment after completion of growth (20 years old), low condylectomy, coronoidectomy, reconstruction of the bilateral TMJs with artificial prostheses along with counterclockwise rotational advancement of the mandible, genioglossus advancement, and orthodontic treatment were performed. After stage III treatment, the amount of mouth opening exhibited a significant increase. Mandibular advancement and ramus lengthening resulted in significant improvement in the facial profile, Class I relationships, and normal overbite/overjet. The OSA symptoms were also relieved. These outcomes were stable at the one-year follow-up visit. Since the treatment modalities for TMJ ankylosis differ according to the duration of ankylosis, patient age, and degree of deformity, the treatment flowchart suggested in this report could be used as an effective guideline for determining the appropriate timing and methods for the treatment of TMJ ankylosis.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.306-313
• /
• 2005

Statement of problem. There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But most of statistical inferences are not definite because of sample size, measurement number, measuring , instruments, etc. And there have been few studies about the marginal fit of Computer-aided Cercon crowns. Purpose. The purpose of this study was to compare the marginal fit of the anterior single restorations made using computer-aided milled Cercon crowns with metal-ceramic restorations and to obtain more accurate information by using a large enough sample size and by making sufficient measurements per specimen. Material and methods. The in vitro marginal discrepancies of computer-aided milled Cercon crowns and control groups (metal ceramic crowns) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared by milling machine. 30 crowns per each system were fabricated. Measurements of a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Parametric statistical analysis was performed for the results. Results. The means and standard deviations of the marginal fit were 85$\pm$22$\mu$m for the control group and 91$\pm$15$\mu$m for the Cercon crowns. The t-test of the marginal discrepancies between Cercon crowns and metal-ceramic crowns were performed. Significant differences were not found between groups (P=0.230>.05). Based on the criterion of 120$\mu$m as the limit of clinical acceptability, the mean marginal fits of Cercon crowns and metal-ceramic crowns were acceptable. Conclusion. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Mean gap dimensions and standard deviations at the marginal opening for maxillary incisal crowns were 85$\pm$22$\mu$m for the control (metal-ceramic crowns), 91$\pm$15$\mu$m for Cercon crowns. 2. The Cercon crowns showed slightly larger marginal gap discrepancy than the control but marginal gap between Computer-aided milled Cercon crowns and metal ceramic crowns did not showed significant difference (P>.05). 3. The Cercon crowns and metal ceramic crowns showed clinically acceptable marginal discrepancy.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• 대한약리학회지
• /
• 제25권1호
• /
• pp.23-30
• /
• 1989

함께 투여되는 마약성진통제에 따라 효능제 또는 길항제(mixed agonist-antagonist)로 작용하는 buprenorphine을 사용하여 개구리 좌골신경에 존재하는 아편수용체의 성질을 검토하였다. 실험은 sucrose-gap apparatus를 사용하여 활동전압에 대한 영향을 관찰하였으며 약물의 상호작용을 검토하고자 meperidine 또는 naloxone을 사용하여 다음과 같은 결과를 얻었다. 1) Buprenorphine은 현저하게 개구리 좌골신경의 활동전압을 저하시켰다. 2) 두 개의 최고작용농도를 보였는데 저농도에서는 $10^{-8}\;M$, 또 고농도에서는 $10^{-4}\;M$에서 현저하게 작용을 나타내었다. 3) Buprenorphine은 meperidine의 활동전압 저하작용을 의의있게 억제하였다. 4) Naloxone에 의하여 Buprenorphine의 저하 작용이 억제되었다. 위의 실험결과로 Buprenorphine은 순수 마약성진통제의 작용을 억제하여 차단제로 작용하는 한편 또한 효능제로 활동전압을 의의있게 억제하였다. 이로써 개구리 좌골신경에 있는 아편수용체는 세포막에 또는 세포막 주위에서 $Na^+-Channel$이 활성화되는 데 중요한 역할을 하는 것으로 간주되며 이 수용체는 또한 Naloxone에 매우 민감한 반응을 나타낸다.

• 해양환경안전학회지
• /
• 제10권1호
• /
• pp.51-54
• /
• 2004

최근 양어 양식장은 증가하고 있으며 이러한 곳에 사용할 가열장치는 경울 수온 조절을 위해 사용된다. 해수 가열장치는 부식성이 높고 압력이 높은 곳에 사용하기 위하여 고강도와 내식성이 요구된다. 만약 저강도와 저내식성을 갖게 되면 결국 누설 또는 파손되어 해수오염을 일으킬 수 있다. 대부분의 부식은 정체된 액과 틈이 형성된 부위에서 부식의 발생이 일어난다. 이 연구에서는 430 스테인레스재를 크기 $15{\times}20{\times}3mmt$에 대하여 1N H2SO4 + 0.05N NaCl용액을 사용하여 틈부식을 시험하였다. 틈의 크기는 $0.24{\times}3{\times}15mmL$로 하였으며 외부에 300mV전위를 인가하였다. 실험 결과 틈 부식 유기 시간은 750초로 나타나고, 틈 전위 강화는 -320에서 -399mV로 나타나 부식의 주 원인이 전위강화 기구에 의해 발생하였다.